AEG ATB68E7NU Freezer User Manual
- June 5, 2024
- AEG
Table of Contents
ATB68E7NU Freezer
ATB68E7NU ATB68E7NW
EN User Manual Freezer
USER MANUAL
2 www.aeg.com
CONTENTS
1. SAFETY INFORMATION………………………………………………………………………….. 2 2. SAFETY
INSTRUCTIONS………………………………………………………………………… 4 3.
INSTALLATION………………………………………………………………………………………..6 4.
OPERATION…………………………………………………………………………………………. 11 5. DAILY
USE…………………………………………………………………………………………… 11 6. HINTS AND
TIPS……………………………………………………………………………………12 7. CARE AND
CLEANING………………………………………………………………………….. 14 8.
TROUBLESHOOTING……………………………………………………………………………. 15 9.
NOISES…………………………………………………………………………………………………17 10. TECHNICAL
DATA………………………………………………………………………………. 18 11. INFORMATION FOR TEST
INSTITUTES……………………………………………….. 18 12. ENVIRONMENTAL
CONCERNS…………………………………………………………….18
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it. Visit our website
to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, PNC, Serial
Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION Before the installation and use of the appliance,
carefully read the supplied instructions. The manufacturer is not responsible
for any injuries or damage that are the result
ENGLISH 3
of incorrect installation or usage. Always keep the instructions in a safe and
accessible location for future reference. 1.1 Children and vulnerable people
safety · This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the appliance in a safe way
and understand the hazards involved. · Children aged from 3 to 8 years are
allowed to load and unload the appliance provided that they have been properly
instructed. · This appliance may be used by persons with very extensive and
complex disabilities provided that they have been properly instructed. ·
Children of less than 3 years of age should be kept away from the appliance
unless continuously supervised. · Do not let children play with the appliance.
· Children shall not carry out cleaning and user maintenance of the appliance
without supervision. · Keep all packaging away from children and dispose of it
appropriately. 1.2 General Safety · This appliance is intended to be used in
household and similar applications such as: Farm houses; staff kitchen areas
in shops, offices
and other working environments; By clients in hotels, motels, bed and
breakfast and
other residential type environments. · To avoid contamination of food respect
the following
instructions: do not open the door for long periods; clean regularly
surfaces that can come in contact
with food and accessible drainage systems;
4 www.aeg.com
· WARNING: Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
· WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
· WARNING: Do not damage the refrigerant circuit. · WARNING: Do not use
electrical appliances inside the
food storage compartments of the appliance, unless they are of the type
recommended by the manufacturer. · Do not use water spray and steam to clean
the appliance. · Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning pads, solvents or
metal objects. · When the appliance is empty for long period, switch it off,
defrost, clean, dry and leave the door open to prevent mould from developing
within the appliance. · Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance. · If the supply cord is
damaged, it must be replaced by the manufacturer, its Authorised Service
Centre or similarly qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING! Only a qualified person must install this appliance.
· Remove all the packaging. · Do not install or use a damaged
appliance. · Follow the installation instructions
supplied with the appliance. · Always take care when moving the
appliance as it is heavy. Always use safety gloves and enclosed footwear. ·
Make sure the air can circulate around the appliance.
· At first installation or after reversing the door wait at least 4 hours
before connecting the appliance to the power supply. This is to allow the oil
to flow back in the compressor.
· Before carrying out any operations on the appliance (e.g. reversing the
door), remove the plug from the power socket.
· Do not install the appliance close to radiators or cookers, ovens or hobs.
· Do not expose the appliance to the rain.
· Do not install the appliance where there is direct sunlight.
· Do not install this appliance in areas that are too humid or too cold.
· When you move the appliance, lift it by the front edge to avoid scratching
the floor.
2.2 Electrical connection
WARNING! Risk of fire and electric shock.
WARNING! When positioning the appliance, ensure the supply cord is not trapped
or damaged.
WARNING! Do not use multi-plug adapters and extension cables.
· The appliance must be earthed. · Make sure that the parameters on the
rating plate are compatible with the electrical ratings of the mains power
supply. · Always use a correctly installed shockproof socket. · Make sure not
to cause damage to the electrical components (e.g. mains plug, mains cable,
compressor). Contact the Authorised Service Centre or an electrician to change
the electrical components. · The mains cable must stay below the level of the
mains plug. · Connect the mains plug to the mains socket only at the end of
the installation. Make sure that there is access to the mains plug after the
installation. · Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
2.3 Use
WARNING! Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a
high level of environmental compatibility. Be careful not to cause
ENGLISH 5
damage to the refrigerant circuit containing isobutane.
· Do not change the specification of this appliance.
· Do not put electrical appliances (e.g. ice cream makers) in the appliance
unless they are stated applicable by the manufacturer.
· If damage occurs to the refrigerant circuit, make sure that there are no
flames and sources of ignition in the room. Ventilate the room.
· Do not let hot items to touch the plastic parts of the appliance.
· Do not put soft drinks in the freezer compartment. This will create pressure
on the drink container.
· Do not store flammable gas and liquid in the appliance.
· Do not put flammable products or items that are wet with flammable products
in, near or on the appliance.
· Do not touch the compressor or the condenser. They are hot.
· Do not remove or touch items from the freezer compartment if your hands are
wet or damp.
· Do not freeze again food that has been thawed.
· Follow the storage instructions on the packaging of frozen food.
· Wrap the food in any food contact material before putting it in the freezer
compartment.
2.4 Internal lighting
WARNING! Risk of electric shock.
· Concerning the lamp(s) inside this product and spare part lamps sold
separately: These lamps are intended to withstand extreme physical conditions
in household appliances, such as temperature, vibration, humidity, or are
intended to signal information about the operational status of the appliance.
They are not intended to be used in other applications and are not suitable
for household room illumination.
6 www.aeg.com
2.5 Care and cleaning
WARNING! Risk of injury or damage to the appliance.
· Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
· This appliance contains hydrocarbons in the cooling unit. Only a qualified
person must do the maintenance and the recharging of the unit.
· Regularly examine the drain of the appliance and if necessary, clean it. If
the drain is blocked, defrosted water collects in the bottom of the appliance.
2.6 Service
· To repair the appliance contact the Authorised Service Centre. Use original
spare parts only.
· Please note that self-repair or nonprofessional repair can have safety
consequences and might void the guarantee.
· The following spare parts will be available for 7 years after the model has
been discontinued: thermostats, temperature sensors, printed circuit boards,
light sources, door handles,
3. INSTALLATION
door hinges, trays and baskets. Please note that some of these spare parts are
only available to professional repairers, and that not all spare parts are
relevant for all models. · Door gaskets will be available for 10 years after
the model has been discontinued.
2.7 Disposal
WARNING! Risk of injury or suffocation.
· Disconnect the appliance from the mains supply.
· Cut off the mains cable and discard it. · Remove the door to prevent
children
and pets to be closed inside of the appliance. · The refrigerant circuit and
the insulation materials of this appliance are ozone-friendly. · The
insulation foam contains flammable gas. Contact your municipal authority for
information on how to discard the appliance correctly. · Do not cause damage
to the part of the cooling unit that is near the heat exchanger.
WARNING! Refer to Safety chapters.
3.1 Dimensions
ENGLISH 7
W1
W2
H1 H2
D1 D3
D2
W3
Overall dimensions ¹
H1
mm
845
W1
mm
604
D1
mm
576
¹ the height, width and depth of the appliance without the handle
Space required in use ²
H2
mm
945
W2
mm
804
D2
mm
689
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use ³
H2
mm
945
W3
mm
1193
D3
mm
1209
³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment
3.2 Location
This appliance is not intended to be used as a built-in appliance.
In case of different installation from freestanding respecting space required
in use dimensions, the appliance will function correctly but energy
consumption might increase slightly.
8 www.aeg.com
To ensure appliance’s best functionality, you should not install the appliance
in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air can circulate freely
around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
To ensure best performance, if the appliance is positioned below an
overhanging wall unit, the minimum distance between the top of the cabinet
shall be maintained. Ideally, however, the appliance should not be positioned
below overhanging wall units. One or more adjustable feet at the base of the
cabinet ensure that the appliance stands level.
CAUTION! If you position the appliance against the wall, use back spacers
provided or keep the minimum distance indicated in the installation
instructions.
CAUTION! If you install the appliance next to a wall, refer to the
installation instructions to understand the minimum distance between the wall
and the side of the appliance where door hinges are to provide enough space to
open the door when the internal equipment is removed (e.g. when cleaning).
This appliance is intended to be used at ambient temperature ranging from 10°C
to 38°C.
The correct operation of the appliance can only be guaranteed within the
specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.
3.3 Electrical Connection
CAUTION! Any electrical work required to install this appliance should be
carried out by a qualified electrician or competent person.
WARNING! This appliance must be earthed. The manufacturer declines any
liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following
code:
A
B
C D E
· A – green and yellow: Earth · C – brown: Live · D – blue: Neutral As the
colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
1. Connect the wire coloured green and yellow to the terminal marked either
with the letter “E” or by the earth
symbol or coloured green and yellow. 2. Connect the wire coloured blue to the
terminal either marked with the letter “N” or coloured black. 3. Connect the
wire coloured brown to the terminal either marked with the “L” or coloured
red. 4. Check that no cut, or stray strands of wire is present and the cord
clamp (E) is secure over the outer sheath. Make sure the electricity supply
voltage is the same as that indicated on the appliance rating plate. 5. Switch
on the appliance. The appliance is supplied with a 13 amp fuse (B). In the
event of having to change the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
WARNING! A cut off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that it is disposed of safely.
3.4 Levelling
When placing the appliance make sure that it stands level. This can be
achieved by two adjustable feet at the bottom in front.
3.5 Door reversibility
WARNING! Before carrying out any operations, remove the plug from the power
socket.
1. Make sure the appliance stands upright.
2. Open the door and remove the door equipment. Refer to the “Daily Use”
chapter. Close the door.
3. Unscrew the screws on the back of the top cover.
ENGLISH 9
4. Lift the top cover and place it on a soft surface.
5. Unscrew the 4 screws that connect the upper hinge. Put the upper hinge in
a safe place together with the screws.
6. Lift the door and put it on a soft surface.
7. Tilt the appliance carefully on a soft foam packaging or similar material
to avoid any damage to the back of the appliance and the floor.
8. Unscrew the screws of the bottom hinge and adjustable feet.
9. Install the pin in the opposite hole of the hinge.
10 www.aeg.com
10. Screw the bottom hinge on the other side of the appliance.
11. Install the rubber support on the side with no hinge.
12. Fit the door on the lower hinge making sure the hinge pin enters the door
bottom hole.
13. Install the upper hinge on the opposite side of the appliance. Fit the
upper hinge pin into the door upper hole. Tighten the screws.
Install the door equipment.
Wait at least 4 hours before connecting the appliance to the power supply.
3.6 Installation of a door handle
If there is a door handle separately provided in a bag, you can install it as
follows:
1. Remove the screws from the holes on the side of the door. Keep or install
the screw covers on the side with a door hinge.
2. Match the handle holes with the holes in the door and screw the handle
with screws previously removed.
14. Screw the remaining 2 screws on the top side of the appliance with no
hinge.
15. Place the top cover on the appliance and tighten the screws on the back.
4. OPERATION
4.1 Control panel
1
2
23
-16 -18 -20 -22°C
3sec
ENGLISH 11
1. Temperature indicator 2. Super Freeze indicator
3. Control button
4.2 Switching on
Insert the plug into the wall socket.
4.3 Switching off
To turn off the appliance, remove the plug from the power socket.
4.4 Temperature regulation
To set the temperature, press the control button repeatedly until you reach
the desired temperature.
Choose the setting keeping in mind that the temperature inside the appliance
depends on:
· room temperature, · frequency of opening the door, · quantity of food
stored, · appliance location. A medium setting is generally the most suitable
one.
4.5 Super Freeze function
The Super Freeze is used to perform pre-freezing and fast freezing in sequence
of Freezer compartment. This function accelerates the freezing of fresh food
and, at the same time, protects
5. DAILY USE
5.1 Freezing fresh food
The freezer compartment is suitable for freezing fresh food and storing frozen
and deep-frozen food for a long time.
foodstuffs already stored from undesirable warming.
To freeze fresh food activate the Super Freeze function at least 24 hours
before placing the food to complete prefreezing.
To activate the Super Freeze function, press and hold the Control button for 3
seconds. The Super Freeze indicator flashes.
This function stops automatically after 52 hours.
You can deactivate the Super Freeze function before its automatic end by
pressing and holding the Control button for 3 seconds. The Super Freeze
indicator turns off.
4.6 Door open alarm
If the freezer door is left open for approximately 1 minute, the sound is on.
The alarm stops after closing the door.
The sound switches off automatically after around 10 minutes to avoid
disturbing.
To freeze fresh food activate the Super Freeze function at least 24 hours
before placing the food to be frozen in the freezer compartment.
12 www.aeg.com
Store the fresh food evenly distributed in the first and second compartment or
drawer from the top.
The maximum amount of food that can be frozen without adding other fresh food
during 24 hours is specified on the rating plate (a label located inside the
appliance).
5.2 Storage of frozen food
When activating an appliance for the first time or after a period out of use,
before putting the products in the compartment let the appliance run at least
3 hours with the Super Freeze function switched on.
When activating an appliance for the first time or after a period out of use,
before putting the products in the compartment let the appliance run at least
3 hours.
The freezer drawers ensure that it is quick and easy to find the food package
you want. If large quantities of food are to be stored, remove all drawers,
except for the bottom drawer which needs to be in place to provide good air
circulation.
Keep the food no closer than 15 mm from the door.
CAUTION! In the event of accidental defrosting, for example due to a power
failure, if the power has been off for longer than the value shown on rating
plate under “rising time”, the defrosted food must be consumed quickly or
cooked immediately then cooled and then re-frozen.
6. HINTS AND TIPS
6.1 Hints for energy saving
· The internal configuration of the appliance is the one that ensures the most
efficient use of energy.
· Do not open the door frequently or leave it open longer than necessary.
· The colder the temperature setting, the higher the energy consumption.
· Ensure a good ventilation. Do not cover the ventilation grilles or holes.
5.3 Thawing
Deep-frozen or frozen food, prior to being used, can be thawed in the
refrigerator or at room temperature, depending on the time available for this
operation. Small pieces may even be cooked still frozen, directly from the
freezer: in this case, cooking will take longer.
5.4 Ice-cube tray
This appliance is equipped with one or more trays for the production of
icecubes.
Do not use metallic instruments to remove the trays from the freezer . 1. Fill
the ice-cube trays with water. 2. Put them in the freezer .
6.2 Hints for freezing
· Activate Super Freeze function at least 24 hours before placing the food
inside the freezer compartment.
· Before freezing wrap and seal fresh food in: aluminium foil, plastic film or
bags, airtight containers with lid.
· For more efficient freezing and thawing divide food into small portions.
ENGLISH 13
· It is recommended to put labels and dates on all your frozen food. This will
help to identify foods and to know when they should be used before their
deterioration.
· The food should be fresh when being frozen to preserve good quality.
Especially fruits and vegetables should be frozen after the harvest to
preserve all of their nutrients.
· Do not freeze bottles or cans with liquids, in particular drinks containing
carbon dioxide – they may explode during freezing.
· Do not put hot food in the freezer compartment. Cool it down at room
temperature before placing it inside the compartment.
· To avoid increase in temperature of already frozen food, do not place fresh
unfrozen food directly next to it. Place food at room temperature in the part
of the freezer compartment where there is no frozen food.
· Do not eat ice cubes, water ices or ice lollies immediately after taking
them out of the freezer. Risk of frostbites.
· Do not re-freeze defrosted food. If the food has defrosted, cook it, cool it
down and then freeze it.
6.3 Hints for storage of frozen food
· Freezer compartment is the one
marked with
.
· Good temperature setting that
ensures preservation of frozen food
6.5 Shelf life
products is a temperature less than or equal to -18°C. Higher temperature
setting inside the appliance may lead to shorter shelf life. · The whole
freezer compartment is suitable for storage of frozen food products. · Leave
enough space around the food to allow air to circulate freely. · For adequate
storage refer to food packaging label to see the shelf life of food. · It is
important to wrap the food in such a way that prevents water, humidity or
condensation from getting inside.
6.4 Shopping tips
After grocery shopping:
· Ensure that the packaging is not damaged – the food could be deteriorated.
If the package is swollen or wet, it might have not been stored in the optimal
conditions and defrosting may have already started.
· To limit the defrosting process buy frozen goods at the end of your grocery
shopping and transport them in a thermal and insulated cool bag.
· Place the frozen foods immediately in the freezer after coming back from the
shop.
· If food has defrosted even partially, do not re-freeze it. Consume it as
soon as possible.
· Respect the expiry date and the storage information on the package.
Type of food Bread Fruits (except citrus) Vegetables Leftovers without meat Dairy food:
Shelf life (months) 3 6 – 12 8 – 10 1 – 2
14 www.aeg.com
Type of food
Butter Soft cheese (e.g. mozzarella) Hard cheese (e.g. parmesan, cheddar)
Seafood:
Fatty fish (e.g. salmon, mackerel) Lean fish (e.g. cod, flounder) Shrimps
Shucked clams and mussels Cooked fish
Meat:
Poultry Beef Pork Lamb Sausage Ham Leftovers with meat
7. CARE AND CLEANING
WARNING! Refer to Safety chapters.
7.1 Cleaning the interior
Before using the appliance for the first time, the interior and all internal
accessories should be washed with lukewarm water and some neutral soap to
remove the typical smell of a brandnew product, then dried thoroughly.
CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based
cleaners as they will damage the finish.
CAUTION! The accessories and parts of the appliance are not suitable for
washing in a dishwasher.
7.2 Periodic cleaning
The equipment has to be cleaned regularly:
Shelf life (months)
6 – 9 3 – 4 6
2 – 3 4 – 6 12 3 – 4 1 – 2
9 – 12 6 – 12 4 – 6 6 – 9 1 – 2 1 – 2 2 – 3
1. Clean the inside and accessories with lukewarm water and some neutral
soap.
2. Regularly check the door seals and wipe them clean to ensure they are
clean and free from debris.
3. Clean the condenser with a brush at least twice a year.
4. Rinse and dry thoroughly.
7.3 Defrosting of the appliance
The defrosting of the freezer compartment is automatic. Although, a layer of
frost may occur on the freezer compartment’s interior walls if the freezer
door is opened frequently or kept open too long.
7.4 Periods of non-operation
When the appliance is not in use for long periods, take the following
precautions:
1. Disconnect the appliance from electricity supply.
2. Remove all food. 3. Clean the appliance and all
accessories.
4. Leave the door open to prevent unpleasant smells.
8. TROUBLESHOOTING
ENGLISH 15
WARNING! Refer to Safety chapters.
8.1 What to do if…
Problem
Possible cause
Solution
The appliance does not op- The appliance is switched
erate.
off.
Switch on the appliance.
The mains plug is not con- nected to the mains socket correctly.
Connect the mains plug to the mains socket correctly.
There is no voltage in the mains socket.
Connect a different electrical appliance to the mains sock- et. Contact a qualified elec- trician.
The appliance is noisy.
The appliance is not suppor- Check if the appliance
ted properly.
stands stable.
The compressor operates continually.
Temperature is set incorrect- Refer to “Operation” chapter. ly.
Many food products were put in at the same time.
Wait a few hours and then check the temperature again.
The room temperature is too Refer to “Installation” chap-
high.
ter.
Food products placed in the Allow food products to cool appliance were too
warm. to room temperature before
storing.
The door is not closed cor- Refer to “Closing the door”
rectly.
section.
The Super Freeze function is Refer to “Super Freeze func-
switched on.
tion” section.
The compressor does not The compressor starts after
start immediately after
a period of time.
pressing the “Super Freeze”,
or after changing the tem-
perature.
This is normal, no error has occurred.
Door is misaligned or inter- The appliance is not level- feres with ventilation grill. led.
Refer to installation instruc- tions.
16 www.aeg.com
Problem
Possible cause
Solution
Door does not open easily.
You attempted to re-open the door immediately after closing.
Wait a few seconds between closing and re-opening of the door.
There is too much frost and The door is not closed cor- Refer to “Closing the door”
ice.
rectly.
section.
The gasket is deformed or dirty.
Refer to “Closing the door” section.
Food products are not wrap- Wrap the food products bet-
ped properly.
ter.
Temperature is set incorrect- Refer to “Operation” chapter. ly.
Appliance is fully loaded and Set a higher temperature. is set to the lowest tempera- Refer to “Operation” chapter. ture.
Temperature set in the appli- Set a higher temperature. ance is too low and the am- Refer to “Operation” chapter. bient temperature is too high.
Water flows inside the refrig- Food products prevent the
erator.
water from flowing into the
water collector.
Make sure that food prod- ucts do not touch the rear plate.
The water outlet is clogged. Clean the water outlet.
Water flows on the floor.
The melting water outlet is not connected to the evapo- rative tray above the com- pressor.
Attach the melting water out- let to the evaporative tray.
Temperature cannot be set.
The Super Freeze function is Switch off Super Freeze
switched on.
function manually, or wait
until the function deactivates
automatically to set the tem-
perature. Refer to “Super
Freeze function” section.
The temperature in the appli- The temperature is not set
ance is too low/too high.
correctly.
Set a higher/lower tempera- ture.
The door is not closed cor- Refer to “Closing the door”
rectly.
section.
The food products’ tempera- Let the food products tem-
ture is too high.
perature decrease to room
temperature before storage.
ENGLISH 17
Problem
Possible cause
Solution
Many food products are stor- Store less food products at
ed at the same time.
the same time.
The door has been opened Open the door only if neces-
often.
sary.
The Super Freeze function is Refer to “Super Freeze func-
switched on.
tion” section.
There is no cold air circula- tion in the appliance.
Make sure that there is cold air circulation in the appli- ance. Refer to “Hints and Tips” chapter.
If the advice does not lead to the desired result, call the nearest Authorized
Service Centre.
8.2 Closing the door
1. Clean the door gaskets.
9. NOISES
2. If necessary, adjust the door. Refer to “Installation” chapter.
3. If necessary, replace the defective door gaskets. Contact the Authorised
Service Centre.
SSSRRR!
BRRR!
CLICK!
BLUBB!
HISSS!
18 www.aeg.com
10. TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web
link to the information related to the performance of the appliance in the EU
EPREL database. Keep the energy label for reference together with the user
manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link
https://eprel.ec.europa.eu and the model name and product number that you find
on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy
label.
11. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552. Ventilation requirements, recess dimensions and minimum rear
clearances shall be as stated in this User Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.
12. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.aeg.com/shop
804183130-B-262021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>