Helicute H835 Strom Brave Stunt Car Instruction Manual

USER FOR H835 & H837

WELCOME
Thanks for purchasing a Stunt Car, get ready to have the time of your life! Please take the time to read the following safety warnings and operating instructions carefully.
CAUTION

• Please remove the battery from the Stunt Car and controller if you are not going to use it.
• Keep the toy away from direct heat.
• Do not pick up the Stunt Car in motion.
• Keep hands, hair, and loose clothing away from tires when the Stunt Car is switched on.

BATTERY SAFETY

• Keep batteries away from Children.
• The battery must be replaced by an adult.
• The battery is only to be charged under adult supervision, do not leave charging batteries unattended.
• Do not cover the batteries when charging. Do not leave batteries in direct sunlight.
• Do not leave a fully charged battery connected to the charger; overcharging may shorten its lifetime.
• Do not dispose of batteries in a fire as they may explode, battery may also explode if damaged.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes a direct connection between the positive (+) and negative (-) terminals of the battery.

BATTERY CHARGING(Li-ion battery version)

Insert one side of the USB connector into the battery, and the other side into any computer USB port or compatible adapter.

CONTROLLER OVERVIEW

OPERATION AND CONTROL

|
---|---
1. Push both joysticks up, the Stunt Car is going forward.| 2. Push both joysticks down, the Stunt Car is going backward.
|
3. Push the left joystick up, and the Stunt Car is turned right. Keep pushing the left joystick up, the Stunt Car is spin to right.| 4. Push the right joystick up, and the Stunt Car is turned left. Keep pushing the right joystick up, the Stunt Car is spun to left.
|
5. Push the left joystick up and the right joystick down at the same time, the Stunt Car begins to rotate in a clockwise direction.| 6. Push the left joystick down and the right joystick up at the same time, the Stunt Car begins to rotate in a counterclockwise direction.
|
7. Push the left joystick down, and the Stunt Car is turned left. Keep pushing the left joystick down, the Stunt Car is spin to left.| 8. Push the right joystick down, and the Stunt Car is turned right. Keep pushing the right joystick down, the Stunt Car is spin to right.

AUTO DEMO

Press the “Demo” Button, the Stunt Car start to play automatically.

How to treat Waste Electrical Products

1. Do not place the product as household waste.
2. Follow the local regulations and laws for the proper disposal of discarded electronic products.
3. HELICUTE encourages you to participate in an electronics recycling program.

Note:
*Always dispose of old batteries responsibly

MAINTENANCE

• Clean the Stunt Car with a clean, dry soft cloth only.
• To avoid irreparable damage, keep the Stunt Car dry and away from water.
• Check the Stunt Car and accessories for damage. If damage is found, do not use the Stunt Car until it is repaired.

BATTERY INSTALLTION

• CONTROLLER To install batteries: Open the cover of the battery case, and insert 2×1.5V AAA batteries, according to indicated polarity (Batteries not included).
• STUNT CAR
  Li-ion battery version
  To install Stunt Car batteries: Open the cover of the battery case, and insert the included 3.7V/500mAh battery (included).
  Dry battery version
  To install Stunt Car batteries: Open the cover of the battery case, and install a 4*1.5V “AAA” battery according to indicated polarity for the car (Battery is not included).
  Battery installation should be done under adult supervision only!
  Do not mix old and new batteries.
  Do not mix different types of batteries.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>