Amazon Basics 16-Gauge Speaker Wire Cable-Complete Features/Instruction Guide

June 5, 2024
amazon basics

Amazon Basics 16-Gauge Speaker Wire Cable

Specifications

  • Compatible Devices : Speaker,
  • Brand : Amazon Basics.,
  • Gauge : 16.0, Unit
  • Count : 100.0 Foot,
  • Package Type : Standard Packaging,
  • Item Weight: 1.08 pounds,
  • Product Dimensions : 5.12 x 3.43 x 5.43 inches,
  • Style: 1-Pack

Introduction

It comes wrapped around a hard plastic reel or handout. It has a white line on one side of the cable that indicates the polarity for a proper audio system setup. It contains a plastic jacket that makes sure high-quality undistorted signals to and from audio equipment. It connects audio speakers to an amplifier or an A/V receiver. The wire is flexible, strips and bends easily so you can wrap it around the furniture, under rugs and through windows when you are organizing a temporary listening station or a workshop, dinner or a social event. It is durable and inexpensive.

What’s IN THE BOX

  • 100 foot 16 gauge speaker wire cable

  HOW TO SETUP

SLENDER WIRES

  • Strip wire insulation, leaving about ½” bare wire on end.

  • Twist wires together tightly.

  • Apply solder 9heat wire until solder lows)

  • Insulate with electrical tape by wrapping tightly o cover the exposed wire

CRIMP CONNECTIONS

  • Strip wire insulation, leaving about ½” bare wire on ends

  • Tightly twist bare wire ends and insert fully into the connector

  • Crimp firmly, once neareach ends or best results

HOW TO CHECK IF THE SPEAKER WIRE IS NEGATIVE OR POSITIVE

Here’s a rundown of the most frequent ways to figure it out:

  • On the positive side, there is a printed line or series of dashes/lines.
  • A red wire or a wire of a different colour than the negative wire is utilised on one side (most often red and black are used)
  • One wire is copper-coloured, while the other is silver-coloured.
  • Small positive (“+”) symbols and/or size information may be printed on the positive wire.
  • The positive side’s insulation is imprinted or moulded with a moulded stripe.

Imprints are the most difficult of the five types to spot, so you’ll need to look intently under good lighting at times. Additionally, positive wires with a “+” print can be difficult to discern at times.

Frequently Asked Questions

  • Is it safe to use 16 gauge speaker wire?
    A 16-gauge wire is usually sufficient for small speaker wire runs. However, for longer speaker wire runs (to another room, for example), thicker, lower- gauge wire is preferable.

  • Which of the speaker cables is the positive one?
    The positive wire is usually red, whereas the ground, or negative is black. Most speaker wires, on the other hand, do not support colour. The good news is that when it comes to speakers, it doesn’t really matter which one you choose as your positive and which one you choose as your negative as long as you’re consistent.

  • What do the letters A and B on speakers mean?
    On the front panel of some A/V receivers, there is a Speaker A and Speaker B switch. The Speaker A output is for the main room speakers, while the Speaker B output is for a second set of speakers in a different room (garage or patio, etc.).

  • Is it possible to have too much speaker cable?
    There is no such thing as too thick a speaker cable. It’s not a problem to have a thick speaker cord. The lower the resistance to current flow, the thicker the speaker wire is.

  • How far can 16 gauge speaker wire be run?
    The overall resistance of the cable should be less than 5% of the speaker’s rated impedance, according to the guideline. Because your Insignias are 8-ohm speakers, 16 gauge is good for a 48-foot run (per speaker). 14 gauge speaker wire has an 80-foot range and 12 gauge has a 120-foot range.

  • Why are there two sets of terminals on speakers?
    Dual-input terminals are included by manufacturers so that consumers can bi-wire their home theatre systems to improve audio fidelity and create a richer sound environment. Many home theatre installations have one dedicated cable running from the amplifier to each speaker as the default arrangement

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

amazon basics User Manuals

Related Manuals