Shenzhen Ruichi Technology TMKBGK61 Wireless Mechanical Keyboard Instruction Manual
- June 5, 2024
- Shenzhen Ruichi Technology
Table of Contents
PRODUCT MANUAL
WIRELESS MODE
Wireless mode
Wired / Bluetooth / 2.4G mode switching FN + space keyboard flashes white
light three times to switch wired mode. When FN is pressed, the white light in
the space indicates that it is currently in wired mode FN + space keyboard
flashes blue light three times to switch to wireless mode. When FN is pressed,
the blue light in the space indicates that it is currently in Bluetooth mode
FN + space keyboard flashes green three times to switch to 2.4G mode. When FN
is pressed, the green light of the space indicates that it is currently in
2.4G mode Ps:
- The three modes are switched through FN + spacebar polling. The current status can be queried by pressing FN to view the light color of the spacebar.
- After the link is successful, short press FN + Z, X, and C to connect the paired host (switching device)
- In Bluetooth mode, press FN to display the channel
- The back on-off is only a power switch. For example, the current keyboard is in wired mode, so only wired functions can be used, and Bluetooth / 2.4G functions cannot be used
- FN + y = 2.4G pairing link (in the 2.4G mode, you need to enter the pairing mode first and then insert the receiver. Even after reset, you need to pair first and then insert the receiver)
FUNCTION
FN KEY COMBINATION
FUNCTION
FN + Win = Win key lock / unlock
(Win Key turns on the red light when its locked)
FN + I\ = Switches the keyboard built-in lighting effect
FN + }] = Switches the keyboard lighting effect to solid color
FN+ [{ = Increase the brightness of the light effect
(The red light of [{key flashing 3 times when the light is set to the
brightest)
FN+ P = Decrease the brightness of the light effect
(The red light of the P key flashes 3 times when the light is set to the
darkest)
FN + “” = Increase the speed of the light effect
(The red light of ” key flashing 3 times when the light is set to the
fastest)
FN +; = Decrease the speed of the light effect
(The red light of;: key flashing 3 times when the light is set to the
lowest speed )
FN + V = Switch to MAC mode
(Keyboard flashing red backlight three times)
FN+ B = Switch to WIN mode
(Keyboard flashing red backlight three times)
FN+ N = Switch the NKRO
(N-Key Rollover, also known as anti-ghost) and 6KRO mode (NKRO mode = The
“N” key shows a RED light when you press the FN key)
FN+ Tab = Press “FN + Tab” at least 3 seconds Reset to the factory default
FN + Backspace = Turn up / off the back light of keyboard
FN + Enter = Lock / unlock FN
(FN key shows the red light after locked, Press again to unlock )
FN + Q = Profile 1
FN + W = Profile 2
FN + E = Profile 3
FN + R = Profile 4
FN + T = Switch back to standard layer| FN + A = Pause / Play
FN + S = Previous song
FN + D = Next song
FN + F = Mute switch
FN + G = Volume Down
FN + H = Volume Up
---|---
Ps: For example, when the keyboard is in profile 1, press the FN key, the Q key light
STATUS
The status of the keyboard can be displayed when pressing the Fn key In
Wired Mode, press FN + R-ALT button to display the power status
(release to restore the original light effect)
| Power Status | R-ALT Key |
|---|---|
| Fully Charged | Light up Green |
| In Charging | Light up Blue |
In Bluetooth Mode, press FN + R-ALT button to display the power status
(release to restore the original light effect)
| Power Status | R-ALT Key | Power Status | R-ALT Key |
|---|---|---|---|
| 95%-100% | Light up Green | 20%-50% | Light up Yellow |
| 50%-95% | Light up Blue | Less than 20% | Light up Red |
Please feel free to contact us if you meet any questions when using our
products. customer@tmkb.com
www.tmkb.com
Made in China
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.