streetwize SWHS 12V In-Car Hair Straighteners Instruction Manual
- June 5, 2024
- streetwize
Table of Contents
streetwize SWHS 12V In-Car Hair Straighteners
Usage Instructions
-
Insert the 12v plug (A) on the appliance into the 12v power socket in the vehicle or into an alternative 12 volt power source such as a Streetwize Power Station if the appliance is to be used away from the vehicle for example when camping.
-
There is a red LED (B) on the plug and this will illuminate to show that the vehicles socket is live and the Hair Straighteners are warming.
On many vehicles it may be necessary to turn your car key in the ignition to the on position or to the auxiliary position in order to obtain power to the appliance. -
Wait approximately 3 minutes for the unit to reach an acceptable heat level.
Warning
- Take care to avoid pulling the wires as this could damage the connection inside the unit.
- Take great care not to touch the plates as they get hot.
- Please ensure when using the appliance that the plates (C) are not placed on surfaces in your vehicle whilst hot and cooling down.
- When you have finished using the straighteners, wait a few minutes for them to cool down before you putting them away.
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West, Trafford Park, Manchester
M17 1RY
Sales enquiries:
sales@streetwizeaccessories.com
Technical enquiries:
support@streetwizeaccessories.com
Telephone: +44 (0)161 447 8597
www.streetwizeaccessories.com
EU Regd. Address: Ace Supply Co (Europe) Ltd, D02 A098, ROI
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>