HBYGE A88 Bluetooth Speaker User Manual
- June 5, 2024
- HBYGE
Table of Contents
HBYGE A88 Bluetooth Speaker
Specifications
- Output power: 40W+15Wx2
- Frequency.60Hz-2OKHz SN
- ratio: 285db
- Output Impedance: 42
- Input votage: DC 5V-2A
- Battery capacity: 8000mAh
- Speaker driver size: 5″+2.5’x2
- Product size:425x200x230mm
PackagE cotents
- A88 Speaker..
- User manual.. 1 PC
- 3.5mm Audlo cable PC 1PC
- USB charge cable. 1PC
- Remote control. 1PPC
- StrapsS.
- Wired microphone.. 1PC 1PC
Product features
- Using the latest decoding chip, Bluetooth 5.0, connect quickly.
- Comfortable handle and hangable shoulder strap, very portable and easy to carry.
- Support Bluetooth, Aux in, U5B, TF card, FM Recording, EQ, Remote, Microphone and so on.
- 7OW output power, 3 speaker drivers, 3D sound.
- Double power supply: 5V-2A charglng & Build-In rechargeble lIthlum battery.
- Compatible for personal computer, MP3, MP4, smart phone and other smart Devlces
- Intelligently select MP3/FM station by remote number keys.
- Can memory the song number after turn off
Safety information
- Store the loudspeaker, away from humid areas, high temperatures, oil and other liquids.
- Do not expose the product to direct sunlight and rain.
- Set a suitable volume to avoid hearing impairment.
- f you do not use the product for a long time, dharge ft at least once per three months in order to avoid damage to the lithium battery.
- It is forbidden to disassemble, repalr or apen the product.
- When charging, please keep away from the reach of children to avold electric shock or suffocation.
Function operational specification
- MIC1: 6.5mm wired microphone socket
- DC 5V: Charging port
- AUX Socket for3.5mm audio cable
- MIC2: Socket for 3.5mm Microphone
- TF Card: Socket for TF ard 5ocket for USB driver
- Mode: Press this button to switch between
- USB: Bluetooth/USB/TF Card/AUX and FM modes. Long press for speaker LED lights switch on/off After you insert a USB orlF card, short press this button, it will play the recording files of the flash. Long press this button, it starts recording (Indication voice recording) you can use an Inserted microphone to record the sound out mom microphone, Short press lt again it wll play the recording file you Just dld.
- REC: After you insert a USB orTF card,short press this button, It will playthe recording files of the flash. Leng press this button, It starts recording (Indication voice recording) you can use a Inserted microphone to record sound out from the microphone, Short press It agail\ it wlll play the recording file you Just did.
- MIC Under Bluetooth modeling press this button to switch between Off Normal/Pop/lazz/Rock/Class. When the microphone is in use, short press this button once, tum the knob to adjust the microphone volume, press again, turn the knob to adjust the ECHO volume.
- Previous song under USB/TF/Bluetooth mode. In FM radio mode, short press for previous station stored. Long press for automatic search of previous station.
- Play/Pause:Short press for play and pause under USB/TF/Bluetooth mode. Under FM radio mode, Long press to start auto-5earch and memory stations, Long press again ID stop auto-search
- Next song under USB/TF/Bluetooth mode. In FM radio mode, short press for next station stored. Long press for automatic search of next station.
- Volume knob: Volume Knob for master volume and mlc volume.
- Dlsplay:Dlgltal LED dlsplay.
MODES
Mode button is used to switch the speaker modes:
Bluetooth, FM radio and input devices.such as U-disk, Miao SD and AUX.
BLUETOOTH MODE
- Power on/off: Tum the volume knob to the right to tum on the speaker. Turn the volume knob to the left to tum it off.
- Bluetooth connection: Open the hands oft Bluetooth Settings (Moblle phone brand different Bluetooth opening method will be different), enter search, the” A88 • will be found, please connect lt. When the Bluetooth pairing Is successful, you will hear a ‘Ding-dong” sound.
Then you can play the music.
In case of unsuccessful pairing, tum the knob to “OFF’ and restart It. After successfully CDrtnectlng to Bluetooth, If you tum off the device, but the Bluetooth on your smart phone remains open , when you restart the device , the Bluetaoth will be connected automatlcally.
FM RADIO MODE
To activate radio FM mode, turn on the speaker, use Mode button to select FM
or press the FM button on the remote control. To search for available radio
stations automatically , dick and hold >II . FM Stations will be saved
automatically. To switch stations , dick I<< or >>I or click the number keys
on the remote control, each number key will save the corresponding FM radio
station. To startsean::hing radio stations manually, please use the number on
the remote to enter the station number you need. For example: if you want to
search for “905” radio station, you can directly press the number 905 on the
remote control to go to 905 radio station.
AUX MODE
To activate AUX mode, turn on the loudspeaker, Use Mode button to select AUX.
Once you have selected this mode , you can use AUX cable to connect your MP3
or computer with the speaker, and then play your music.
SD MODE
To activate the SD mode, turn on the speaker and Insert the SD card
to automatically switch to SD mode and play the music from SD card .
After pulllng out. if you re-Insert the lF card, the speaker will start
playing m>m the previous breakpoint.
USA DISK MODE
To activate USB mode, turn on the loudspeaker and Insert your USB to
automatically switch to USB mode. After pulling out If you re-Insert the USB,
the speaker will start playing m>m the previous breakpoint
RECORDING MODE
In lF / USB mode, you click REC to enter the recording mode, and then you must
use the microphone to record. Press REC again to end the recording and play
the recording. The recording will be saved In lF card or USB flash memory. The
steps to nl!cord the sound out through microphone as follows:
(Premises) The TF card or usb drive with the storage device must be plugged
into the device
- Step 1. Plug In the microphone
- Step 2. Long press the REC button to prompt RECORDING MODE
- Step 3. Speak and record through the microphone. short Press the REC to end the recording then play the recording automatically.
- Step 4. Long press the REC to quickly display the del. to delete the recording
CHARGING
To large the battery, insert the USB charge cable to the loudspeaker
port and then connect it to a DC 5V charger, and plug the charger into an AC
22fN power source.Charge the speaker the same as Charge your phone. Charging
LED light indicator: It is always red when charging; the red light will be off
after fully charged .
SOLUTIONS TO COMMON PROBLEMS
| Trouble | Causes and Solutiona |
|---|
Bluetoolh pairing falled
Speaker 80Und Is tooamail
| Cause 1: The speaker is not in Blueltloth mode cauae 2: Toa speaker Bluatooth ii aub:lmatieally
connected lo other devices
Solution: Press• Mode” choose Bluetooth mode if other daviC88 are automatically connected, long pn,ss • INI • lo dlsoonnect Bluetoolh ,tum on the phone Blualooth and connect to A88
cauae 1: Toa volume of the apaaksr is too low cause 2: The volume of the phone I & too low Solullon: Pleeae lncreese the apaaker and
phone volume .
Music playing t1ac;1;eto
| cause 1: The Effilctlvll distance bat.ween Iha speeker and Iha mobile phone may be mora than100 feet
cause 2: There are obstacles between Iha speeker and Iha mobile phone
Solution: If ii ill Iha above reasons. pla88e 9hortan the effactlva distance bat.ween the speeker and Iha mobile phone. If not , plaua raconnact to Bluatooth.
Speaker doesn’t work
| cause 1: The speaker may have run out af power Cause 2: Bluelo0th Is not connected
cauae 3: Toa volume ofthe apaaksr may not ba
turned on ,or the volume of Iha mobile phone may not be turned on
SOiution: Pleue tum on Iha 1paakar again after fully charged, reconnect Bluetooth, lnc…e Iha volume of the apaakllr and thaphona.
THE REMOTE INSTRUCTIONS
- To tum the unit on for music: playback or standby mode
- When the unit ls operating in USBISD playback mode, press this button to permanency 5top pill)’LNG the source file. You need to pA!!SS to restart playback.
- Pressing this button to the unit’sspeaker output at any time. Press again to resume speaker output
- Mode: Ch,11nge the pl;Ryback source mode of BLUE CONNECT/LJNE/FM USB/IF
- When playback from the USB ID source, press this button to set repeat playback setting (Single or All tradt repeat).
- EQ: Under USB/TF source pl,;iyback mode, press th is button to select diffl!rent EQ hearing. such as Off /Normal / Pop/ .lazz//Rock/Cll55 /Etc.
- Previous song for USBISD playback. Previous channel for radio operation
- Next song for USBJSD pl;iyback. Next channel fur radio operation
- Pulse/Play:During USB/SD playback mode. p11i!5s this button to pause the playback. Press again to resume playback. During FM radio mode. Long prl!SS to start auto-scan stations. Then Short pres.s It agal n to 5top the auto-scan.
- Volume Decrease
- Volume lnc:rea5e
- The number keys o-9: Duitng USB/50 playback mode, press the number combination to designate that song number to start playback. During Radio Channel or Radio Frequency mode, press the number com bll”liltion to select the Ch,11nnel number to play. (Note: When done pressing the number combination, just wait 2 seconds and the system will automatlcally confirm your In put).
- Klllraoke priority: This speaker does not have this function.
- Record/Pl,;iyback:After you Insert a USB/TF card, press this button to enter the record state.press ag,11ln to play the recording .
- FM trimming decrease
- FM tltmmlng Increase
- FM memory button from Fl to F6.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>