Cubilan AMFS01B1 Wood Decorative Wall Shelves Instruction Manual
- October 30, 2023
- CUBILAN
Table of Contents
AMFS01B1 Wood Decorative Wall Shelves
Instruction Manual
Model: AMFS01B1/ AMFS01Y/ AMFS01W/AMFS01/AMFS04
Caliban AMFS01B1 Wood Decorative Wall Shelves
Thank you for choosing this product. we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact us .
**IMPORTANT SAFETY INFORMATION
**
- Check package contents against supplied parts and hardware list to assure that all components were received undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact us.
- Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact us.
- Not all parts and hardware included will be used.
- Using with caution because this product may contain moving parts.
- Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. Thank you for your understanding.
Tools Needed (Not included) Supplied Parts and Hardware List
NOTE:
- This shelving system is for designed for use in wood stud, dry wall, solid concrete, and concrete block walls.
- For drywall mounting, please use wall anchors [C].
- For wood stud mounting, wall anchors [C] and [D] are not necessary.
- For concrete concrete or concrete blocks wall mounting, please use wall anchors [D]
Installation Locations for the Floating Shelves
Note:
- For the convenience to fetch something, please leave proper distance between the two floating shelves before installation.
- If you want to install the two floating shelves vertically, please install the the floating shelf with towel rack under the floating shelf washout towel rack and leave a proper distance between the two floating shelves.
Here are four popular options for the installation locations of the two floating shelves:
Step 1 Secure the Towel Rack [02] to the Shelf on the Metal Frame [01]
Step 2 Secure Metal Frame with Shelf to Wall
Before installation, please identify your wall type. For wood stud
installation, follow the step 2A. For drywall installation, follow the step
2B. For solid concrete and concrete block walls installation, follow the step
2C
Step 2A For Wood Stud Use a stud finder(not included) to locate wood studs. Mark the edge and center locations.Position the metal frame with shelf at your desired height and line up the holes with your stud center line. Level the shelf and mark the holes.Install the metal frame with shelf using long lag screw [A]. Tighten long lag screws [A] with the screwdriver (not included). If you feel it is difficult to install the long lag screws [A] to wall, you can simply use a 2mm(5/64 in.) drill bit to drill 2 pilot holes for the long lag screw [A]. Tighten the long lag screw [A] only until the long lag screw [A] is pulled firmly against the metal frame.
Step 2B For Drywall Position the metal frame
with shelf [01] at your desired height and make sure the metal frame with
shelf [01] is level and flush to the drywall. Mark the holes for the wall
anchors [C].Press and screw wall anchors [C]
into the drywall using a screwdriver and turn clockwise. Make sure that wall
anchors [C] are flush with the wall.Install the
metal frame with shelf [01] using short lag screws [B] and wall anchors [C],
tighten short lag screws [B] until they are pulled firmly against the metal
frame.
Step 2C For Solid Concrete and Concrete Block Walls Position the metal frame with shelf [01] at your desired
height and make sure the metal frame with shelf [01] is level and flush to the
solid concrete and concrete block walls. Mark the holes for the wall anchors
[D].Drill 2 pilot holes using a 15/64 in.(6mm)
diameter drill bit. Make sure the depth is not less than 1 3/8 in.(35mm).
Never drill into the mortar between blocks.Use the hammer to
knock wall anchors [D] into the wall. Make sure the anchors [D] are seated
flush with the concrete surface.Install the metal frame with
shelf [01] using short lag screws [B] and wall anchors [D], tighten short lag
screws [B] until they are pulled firmly against the metal frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>