Lanling LY1 Open Ear Headphone Instruction Manual
- June 5, 2024
- Lanling
Table of Contents
**Lanling**
Open Ear Headphone
LY1
Instruction manual
Product diagrams
Product specifications
Model： LY1
Chip versions：5.1
Styles： Sports style
Horn：16mm/Ordinary
Transmission distance：≤10m
Battery capacity：180mah
Talking time：8h
Playing time：8h
The Main features
Boot method: soft-boot
Boot time: 2 seconds
Off time: 3 seconds
Auto shut-off time: 3 minutes Support: TF card
Button functions
Power-on tone: default English
Switching voices: double click to switch languages after switching on
Power on/off: V+ key press and hold for 2s to turn on, press and hold for 3s
to turn off
Volume plus: V+ key short press
Volume down: V-key short press
Next song: V+ key long press
Previous song: V-key long-press
Play/pause: V+key double click
Answer: V+ key short press
Hang up: V+key long press 2S
Rejecting an incoming call: V+ key press and hold for 2 seconds
Digital tube shows current battery level:V-key three hits
Siri: V+key three clicks
TF/Bluetooth mode switch:V-key double click
Flashing LEDs
Power on: blue light flashes three times alternating red and blue lights
Power off: red light on for 1S
Matching: alternating red and blue flashes
Successful connection: blue light flashes slowly
Music playing: blue light flashes slowly
The music paused:blue light flashes slowly
Incoming calls: blue light flashes slowly
During the call: blue light flashes slowly
Low battery: red light flashes slowly
Charging: Red light always on (digital tube illuminated)
Fully charged: Blue light always on
Electric current
Whether the charge is switched off or not: Off
Charging voltage: 5V
Charging current: 100mA
Power consumption for playing music: 26mA-38mA
Call power consumption: 22mA-30mA
Standby power consumption: 0.59mA
Shutdown power consumption: 2.2uA
Low power shutdown voltage: 3.1V
Search for electric current: 18mA
Low power beep voltage: 3.3V
TF card mode power consumption: 32mA-43mA
Cautions
- Please charge in a safe environment. bay form the cable when the display shows
- When playing music, please turn the music to the appropriate volume level to avoid long-term hearing problems at high volumes.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>