KARCHER LMO 5-18 Dual Battery Set Instruction Manual

: June 6, 2024
: Karcher

LMO 5-18 Dual Battery Set
Instruction Manual

KARCHER LMO 5 18 Dual Battery Set LMO 5-18 Dual

LMO 5-18 Dual Battery Set

KARCHER LMO 5 18 Dual Battery Set - feager KARCHER
LMO 5 18 Dual Battery Set - feager1

Safety instructions

Read these safety instructions, these original instructions, the safety instructions provided with the battery pack and the original instructions supplied with the battery pack/standard charger before using the device for the first time. Act in accordance with them. Keep the booklets for future reference or for future owners.
In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.
Hazard levels
DANGER
● Indication of an imminent threat of danger that will lead to severe injuries or even death.
WARNING
● Indication of a potentially dangerous situation that may lead to severe injuries or even death.
CAUTION
● Indication of a potentially dangerous situation that may lead to minor injuries.
ATTENTION
● Indication of a potentially dangerous situation that may lead to damage to property.
General Power Tool Safety Instructions

WARNING
● Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety
a Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
a Power tool plugs must match the outlet. Nev- er modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
b Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduc- es the risk of electric shock.
Personal safety
a Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
c Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
Power tool use and care
a Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
h Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles an grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
Battery tool use and care
a Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
c When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e Do not use a battery pack or tool that is dam- aged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.
g Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
a Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Lawnmower safety warnings

Do not use the lawnmower in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.
Thoroughly inspect the area for wildlife where the lawnmower is to be used. Wildlife may be injured by the lawnmower during operation.
Thoroughly inspect the area where the lawnmower is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown objects can cause personal injury.
Before using the lawnmower, always visually inspect to see that the blade and the blade assembly are not worn or damaged. Worn or damaged parts increase the risk of injury.
Check the grass catcher frequently for wear or deterioration. A worn or damaged grass catcher may increase the risk of personal injury.
Keep guards in place. Guards must be in working order and be properly mounted. A guard that is loose, damaged, or is not functioning correctly may result in personal injury.
Keep all cooling air inlets clear of debris. Blocked air inlets and debris may result in overheating or risk of fire.
While operating the lawnmower, always wear non-slip and protective footwear. Do not operate the lawnmower when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with the moving blade.
This reduces the chance of injury to the feet from contact with the moving blade. Exposed skin increases the likelihood of injury from thrown objects.
Do not operate the lawnmower in wet grass. Walk, never run. This reduces the risk of slipping and falling which may result in personal injury.
Do not operate the lawnmower on excessively steep slopes. This reduces the risk of loss of control, slipping and falling which may result in personal injury.
When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down and exercise extreme caution when changing direction. This reduces the risk of loss of control, slipping and falling which may result in personal injury.
Use extreme caution when reversing or pulling the lawnmower towards you. Always be aware of your surroundings. This reduces the risk of tripping during operation.
Do not touch blades and other hazardous moving parts while they are still in motion. This reduces the risk of injury from moving parts.
When clearing jammed material or cleaning the lawnmower, make sure all power switches are off and the battery pack is disconnected. Unexpected operation of the lawnmower may result in serious personal injury.
When clearing jammed material or cleaning the lawnmower, make sure all power switches are off and remove (or activate) the disabling device. Unexpected operation of the lawnmower may result in serious personal injury.

General safety instructions
DANGER

The device can amputate hands and feet, causing death or severe personal injury, and can fling objects unpredictably.
Severe injuries through a lack of concentration when working. Do not use the device when under the influence of drugs, alcohol, or medication, or when you are tired.

WARNING

Children over the age of 8 and persons with reduced physical, sensory or mental capabilities, or those with a lack of experience and knowledge, are only allowed to use the appliance if they are properly supervised, have been instructed with respect to using the appliance safely by a person responsible for their safety, and understand the resultant dangers in- volved.
Children must not play with the appliance.
Children must be supervised to prevent them from playing with the appliance.
Use only the battery pack specified in these operating instructions with the device. Observe the basic precautionary measures when using battery operated devices, to reduce the risk of injuries, fire and a leaking battery.
Wear long, heavy trousers, clothing with long arms and non-slip boots when working with the device. Do not work barefoot. Do not wear sandals or short trousers. Avoid wearing loose clothing or clothing with cords and straps.
Wear protective goggles or safety goggles with side protection.
Always guide the device along the face of a gradient. Danger of severe injuries when you guide the device up and down a gradient.
Do not run but rather walk when working with the device. Maintain a solid and safe footing and keep your balance, especially when working on gradients.
Danger of accident due to slipping. Do not use the device at the edges of steep slopes or trenches, on steep slopes or embankments.

CAUTION

Familiarise yourself with the controls and the correct use of the device.

Occupational safety

DANGER

Severe injuries when objects are flung by the cutting blade or when the cutting tool becomes entangled in wires or cords. Inspect the work area thoroughly for objects such as stones, sticks, metal, wires, bones or toys and remove these before using the device.
Never use the device when persons, especially children, are within a radius of 15 m of the working area, because the danger exists of objects being flung out by the cutting blade.
Danger of explosion. The device creates sparks that may ignite dust, gas or vapours. Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases or dusts.
Severe accidents with children. Children can be attracted by the device and your activities. Keep an eye on children because they do not always remain where you have last seen them.

WARNING

Do not operate the device on wet grass or in the rain.
Do not use the device if there is a danger of lightning.
Always mow in daylight or under good artificial lighting.
Keep children away from the mowing area and have them supervised by an adult who is not the operator, be alert and switch the device off if a child enters the mowing area.
Be careful when approaching blind corners, bushes, trees or objects that might restrict your view.

ATTENTION

The device operator is responsible for accidents with other people and their property.

Safe operation

DANGER

Check that the blade, blade bolts and blade unit are undamaged each time before using the device.
Never lock the On/Off switch in the ON position, this is extremely dangerous.
Pull the device backwards only when absolutely necessary. If you need to pull the device away from a wall or obstacle, first pull downwards to prevent yourself from stumbling or pulling the device over your feet.
Danger of coming into contact with the open blade or being hit by flung objects. Do not tip the device when starting the motor or while the motor is running. If tipping is absolutely necessary, e.g. to make starting easier, then you can raise the front of the device by 5 cm. Press the handle carefully down- wards for this. You must return the device to the normal operating position (i.e. all four wheels on the ground) before starting to mow.
Knives that come into contact with a live cable may energize exposed metal parts of the device and cause an electric shock.

WARNING

The blades on the device are sharp. Wear sturdy protective gloves and work carefully when installing, replacing, cleaning or checking the seating of screws.
Replace worn or damage parts as a complete set to maintain the correct balance.
Ensure that the device is in a safe condition by regularly checking that all bolts, nuts and screws are screwed tight.
Replace any worn or damaged parts before operating the device.
Never use the device if the on/off switch on the handle does not switch on and off correctly.
Do not forcefully operate the device.
Stop the motor, in order to stop the blade when transporting the device to and from the mowing area or when tipping the device for crossing ground that is not covered with grass.
Stop the blade before crossing gravel surfaces.
Never use the device with defective or absent protective devices, such as e.g. deflectors and/or the grass catcher.
Do not bring your hands or feet in the vicinity of, or underneath rotating parts. Switch the motor on according to the operating instructions.
Never lift or carry the device while the motor is running.
Uneven terrain carries an increased risk of slipping and accidents. Avoid holes, furrows, uneven areas, stones and other hidden objects.
Start the device only when you are positioned in the safe area behind the handle.
All four wheels are on the ground.
The grass ejection chute is not open but rather protected by the grass catcher or the ejection chute cover.
The hands and feet of all persons are away from the cutting housing.
Switch the motor off and remove the safety key. Ensure that all moving parts have completely stopped moving:
Always when you leave the device unattended, including the periods when disposing of the mown grass.
Before removing a blockage or cleaning the ejection chute.
Before checking, cleaning or working on the device.
After hitting a foreign object. First check the device for damage and repair any damage before restarting the device.
Before removing the grass catcher or the grass ejection chute cover.
When the device starts to vibrate unusually. Immediately check the device:
– For loose parts. Tighten any loose parts if necessary.
– For damage, especially to the blade. Repair or replace any damaged parts.

CAUTION

Check the grass catcher regularly for wear and tear.

ATTENTION

Take care to ensure that the motor control cable is not jammed or damaged in any other way during installation or when folding the handle.

Residual risks

WARNING

Certain residual risks remain present, even when the device is operated in the prescribed manner. The following dangers can be present when using the device:
Vibration can cause injuries. Use the correct tools for the job, use the handles provided and restrict the working time and hazard exposure time.
Noise can cause hearing injuries. Wear hearing protection and limit the duration of exposure.
Injuries through contact with the blades.
Injuries due to flung objects.

Risk reduction

CAUTION

Using the device for longer periods can cause poor circulation in the hands due to vibrations. A general period of use cannot be set, because this depends on several influencing factors:
Personal tendency to suffer from poor circulation (frequently cold fingers, tingling sensation in the fingers)
Low ambient temperature. Wear warm gloves to protect your hands.
Holding the device too tightly hindering blood circulation.
Continuous operation is more harmful than operation interrupted by work breaks. You should see a doctor if using the device regularly and for lengthy periods of time, and in the event of repeated occurrences of symptoms such as tingling in the fingers or cold fingers.

Intended use

DANGER
Improper use
Danger of death from incision injuries
Only use the device for its proper use.

Use the battery lawnmower in private households only.
The device is intended for outdoor use only.
The device is designed for mowing private lawns.
The device is designed for being pushed by hand.
The device should not be pulled.
Riding on the device is prohibited.
The transport of persons and animals is not permitted.
Other uses of the device are prohibited. The user is liable for any damage caused by improper use.

Rechargeable battery packs and chargers
Only use the device with battery packs and chargers from the KÄRCHER 18 V Battery Power (+) system. Suitable battery packs and chargers are marked with the KÄRCHER 18 V Battery Power (+) System symbol. Suitable battery packs bear the designation “Battery Power 18/… and Battery Power+ 18/…”.
Suitable chargers bear the designation “BC 18 V …”.

Environmental protection

** The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.
Notes on the content materials (REACH)**
Current information on content materials can be found at: www.kaercher.de/REACH

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and safely.
Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Safety devices

Symbols on the device

| General warning symbol
---|---
| Read the operating instructions and all safety instructions before operating the device for the first time.
| Watch out for flung or flying objects.
| Keep all spectators, especially children and pets, at least 15 m away from the work area.
| Watch out for the sharp blade. The blades continue rotating after the motor has been switched off.
| Remove the safety key before performing any maintenance.
| The guaranteed sound level specified on the label is 96 dB.
| Grass catcher filling level indicator

Overload protection
The device is equipped with an overload protection system.
The device switches off automatically when an overload is detected.

Description of the device

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).
For the illustrations, refer to the graphics page.
Illustration A

Front wheel
Battery pack release
Safety key
Battery flap
Ejection chute flap
Grass catcher filling level indicator
Motor control cable
Starter button
Telescopic handle
Start/stop bow
Handle lock
Grass catcher
Quick-release catch
Type plate
Rear wheel
Cutting height adjustment lever
Mulch plug
*Charger
*Rechargeable battery pack

optional

iPower
The device is equipped with the iPower intelligent motor control system, which enables efficient mowing and optimised battery run time. iPower adjusts the motor speed to the grass conditions:

The motor speed is increased for long or dense grass.
As soon as the grass density decreases, the motor speed is reduced.

Installation

Installing the handle

Unscrew the quick-release catches from the device.
Illustration B
Position the handle and screw it tight with the quickrelease catches.
Illustration C
Note
Pay attention to the screwing depth when screwing tight the quick-release catches.
● If you screw the quick-release catches in too far, the handle can no longer be folded down.
● If you do not screw the quick-release catches in far enough, the quick- release catches will not clamp the handle securely.
Fasten the motor control cable using the cable holder.
Illustration D

Installing the grass catcher

Fold the rods apart.
Insert the rods into the lower guide.
Illustration E
Clip in the rods.
Clip in the handle.

Initial startup

Adjusting the handle

Loosen both quick-release catches.
Illustration F
Fold over the telescopic handle.
Lock the handle with the quick-release catches.
Illustration G
Unlock the handle locks.
Illustration H
Pull the telescopic handle out completely.
Lock the handle locks.
Adjust the inclination angle of the handle if necessary.
a Loosen both quick-release catches.
Illustration I
b Choose the inclination angle.
c Lock the quick-release catches.

Attaching the mulch plug
The mulch plug is used when the mown grass is to remain on the lawn.

Open the ejection chute flap.
Illustration J
Insert the mulch plug into the ejection chute.
Close the ejection chute flap.

Inserting the grass catcher
The grass catcher is used when the mown grass is to be collected for disposal.

Open the ejection chute flap.
Illustration K
Squeeze the handle of the mulching plug and pull out the mulching plug.
Insert the grass catcher on the ejection chute. Take care to ensure that the ejection chute flap locks the grass catcher in place.
Illustration L

Mount the battery pack

Open the battery flap.
Illustration M
Push the battery pack into the mount in the device until it audibly latches into place.
Insert the safety key.
Close the battery flap.

Operation

General information on handling the lawnmower
The run time of the battery depends on several factors:

The condition, length and density of the grass
The cutting height setting
The maximum surface performance, depending on the state of the grass, with two fully charged 5 Ah battery packs: approx. 550 m 2.
The results of the mowing process can be optimised as follows:
Cut at a maximum of one third of the grass height.
Reduce the speed at which push the device when mowing tall grass.
Note
Do not mow wet grass. Wet grass sticks to the underside of the lawnmower and prevents correct collection of the grass in the grass catcher or ejection of the grass.

Mowing lawns

WARNING
Lifting or tipping the lawnmower during operation Incision injuries
The blade of the lawnmower rotates approximately parallel to the ground over which it moves. Take care to ensure that all four wheels touch the ground when mowing.

Install the grass catcher or mulch plug (see Chapter Initial startup).
Set the cutting height using the cutting height adjustment lever.
Illustration N
Choose the cutting height according to the condition, length and density of the grass (see Chapter General information on handling the lawnmower).
Illustration O
Press and hold the start button, then immediately press the start/stop bow. Illustration P
The device starts.
Release the start button and continue to hold the start/stop bow until you reach the handle.
Empty the grass catcher regularly when using the grass catcher, otherwise the ejection chute can become clogged with cut grass (see Chapter Emptying the grass catcher).

Mowing edges

Lawn edges, e.g. along a wall, can also be mown using the device.

Push the lawnmower along the wall, close to the wall.
Illustration Q
The side inlet ensures that the grass is pulled into the cutting zone.
Illustration R

Ending operation

Release the start/stop bow.
Illustration S
The motor stops.

Removing the battery pack

Open the battery flap.
Illustration T
Remove the safety key.
Remove both battery packs.
a Press the battery pack release.
b Remove the battery pack.
Close the battery flap.

Emptying the grass catcher
The flap on the grass catcher filling lever indicator closes when the grass catcher is full. Empty the grass catcher in this case.

Lift the ejection chute flap.
Illustration U
Remove the grass catcher.
Take care to ensure that the motor control cable remains in the cable holder when removing the grass catcher.
Empty the grass catcher.

Transport

WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.

Switch off the device (see chapter Ending operation.)
Ensure that the blade is no longer rotating.
Remove the safety key (see Chapter Removing the battery pack).
Removing the battery packs.
Allow the device to cool down.
Secure the device against slipping and tipping over when transporting in vehicles.

Storage

Always clean the device before putting it into storage (see Chapter Cleaning the device).

Remove the safety key.
Remove the battery packs (see Chapter Removing the battery pack).
Unlock the handle locks.
Illustration V
Push the telescopic handle in completely.
Lock the handle locks.
Release the quick-release catches and fold down the handle.
Illustration W
Place the grass catcher on the handle and the device.
Illustration X
Store the device in a dry, well ventilated location.
Keep away from corrosive substances such as garden chemicals and defrosting salt. Do not store the device outdoors.

Care and service

WARNING
Sharp blade
Incision injuries
Be careful when tipping or lifting the device.
Keep all parts of your body away from the cutting blade.

Before initial startup
Before each startup, the following maintenance activities must be carried out:

Check the device for damage.
Check all bolts, nuts and screws for tightness; retighten if necessary.
Check the sharpness of the blade. Replace a blunt blade.

Cleaning the device

Remove the safety key.
Remove the battery packs (see Chapter Removing the battery pack).
Clean the exterior of the device with a soft, damp cloth or brush after each use.
Illustration Y
Clean the blade before longer storage periods.
Tip the device onto the side.
Illustration Z
Clean the blade and the underside of the device using a brush.
Illustration AA

Removing blockages
WARNING
Removing blockages
Incision injuries from the sharp blade or sharp-edged objects
Wear protective gloves when checking for blockages or removing blockages.

Switch the device off and wait until the blade comes to a standstill.
Remove the safety key.
Remove the battery packs (see Chapter Removing the battery pack).
Remove the grass catcher and check for blockages.
Remove any blockages.
Check the ejection shaft for blockages. Remove any blockages.
Tip the device onto the side.
Check the underside of the device and the blade for blockages. Be careful when removing blockages because the blade can move while doing this.

Replacing the blade

Remove the safety key.
Remove the battery packs (see Chapter Removing the battery pack).
Clean the underside of the device (see Chapter Cleaning the device).
Lock the blade and then loosen the screw.
Illustration AB
Remove and dispose of the blade.
Illustration AC
Fit the new blade into the holder.
Illustration AD
Lock the blade and tighten the screw (23 Nm).
Illustration AE

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

Fault	Cause	Rectification
The device switches off	The device overload protection system has triggered.

1.Release the start/stop bow.
2.Press the start button and the start/stop bow.
A battery pack overheating protection has triggered.| 1.Wait until the battery pack temperature lies within the normal range.
2.Charge the battery pack if the device cannot be switched on.
At least one battery pack is empty.| 1. Charge the battery pack.

Technical data

Device performance data

Nominal voltage| V| 36
Cutting width| cm| 41
Cutting height| mm| 25-70
Grass catcher volume| I| 45
Idle speed (max.)| min-1| 3500
Determined values in acc. Wilt EN 62841-4-3
Sound pressure level Lia| dB(A)| 82
Uncertainty KpA| dB(A)| 3
Sound power level LNA| dB(A)| 96
Uncertainty Kwa| dB(A)| 0,88
Right handle hand-arm vibration value| m/s²| 1,3
Left handle hand-arm vibration value| m/s²| 1,3
Uncertainty K| m/s²| 1,5
Dimensions and weights
Length x width x height| mm| 1260 x 440 x 1020
Weight (without battery pack)| kg| 14,1
Subject to technical modification| |

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)
Further warranty information (if available) can be found in the service area of your local Kercher website under “Downloads”.

Declaration of Conformity

EU Declaration of Conformity
We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in circulation by us. This
declaration is invalidated by any changes made to the machine that are not approved by us.
Product: Battery-operated lawnmower
Type: 1.444-4xx.0
LMO 2-18,
LMO 3-18,
LMO 4-18 Dual,
LMO 5-18 Dual
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2011/65/EU
2014/30/EU
2000/14/EC (+2005/88/EC)
Harmonised standards used
EN 62841-1:2015+A11
EN IEC 62841-4-3:2021+A11:2021
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1977+A1: 2001+A2: 2008
EN IEC 63000: 2018
Conformity evaluation procedure used
2000/14/EC: Annex VI
Name and address of the notified body involved
TÜV Rheinland LGA Products GmbH (NB 0197)
Tillystraße 2
D-90431 Nuremberg
Sound power level dB(A)
LMO 2-18:
Measured: 86
Guaranteed: 88
LMO 3-18:
Measured: 87
Guaranteed: 89
LMO 4-18 Dual:
Measured: 92
Guaranteed: 94
LMO 5-18 Dual:
Measured: 95
Guaranteed: 96
The signatories act on behalf of and with the authority of the company management.

Documentation supervisor:
S. Reiser
Alfred Kercher SE & Co. KG
Alfred-Kercher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2024/03/01
We hereby declare that the product described below complies with the relevant provisions of the following UK Regulations, both in its basic design and construction as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is modified without our prior approval.
Product: Battery-operated lawnmower
Type: 1.444-4xx.0
LMO 2-18,
LMO 3-18,
LMO 4-18 Dual,
LMO 5-18 Dual
Currently applicable UK Regulations
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
S.I. 2016/1091 (as amended)
S.I. 2001/1701 (as amended)
Designated standards used
EN 62841-1:2015+A11
EN IEC 62841-4-3:2021+A11:2021
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 1977+A1: 2001+A2: 2008
EN IEC 63000: 2018
Applied conformity assessment procedure
S.I. 2001/1701 (as amended): Schedule 9
Name and address of the notified body involved
AnP Certification Limited (NB 8500)
2 Parkfield Street
Rusholme
Manchester
M14 4PN
United Kingdom
Sound power level dB(A)
LMO 2-18:
Measured: 86
Guaranteed: 88
LMO 3-18:
Measured: 87
Guaranteed: 89
LMO 4-18 Dual:
Measured: 92
Guaranteed: 94
LMO 5-18 Dual:
Measured: 95
Guaranteed: 96
The signatories act on behalf of and with the authority of the company management.
Declaration of Conformity (UK)

Documentation supervisor: S. Reiser
Alfred Kercher SE & Co. KG
Alfred-Kercher-Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2024/03/01

THANK YOU!
MERCI! DANKE!¡ GRACIAS!
Register your product and benefit from many advantages.
www.kaercher.com/welcome
**** Rate your product and tell us your opinion.

http://kaer.ch/er/?l=TwSoJtl9IUOwZyAe1rHDyw KARCHER LMO 5 18 Dual Battery
Set - icon2 www.kaercher.com/dealersearch
Alfred Kercher SE & Co. KG
Alfred-Kercher-Str. 28-40
71364 Winnenden (Germany)https://kaer.ch/er/bta/14454310 Register your product
www.kaercher.com/welcome