TRISTAR KA-5059 Fan Heater Instruction Manual

: June 6, 2024
: Tristar

Table of Contents

TRISTAR KA-5059 Fan Heater
Product Information
Product Usage Instructions
Frequently Asked Questions
SAFETY
PARTS DESCRIPTION
BEFORE THE FIRST USE
CLEANING AND MAINTENANCE
Documents / Resources

TRISTAR KA-5059 Fan Heater

Product Information

Specifications

Model: KA 5059
Manufacturer: Tristar Europe B.V.
Address: Swaardvenstraat 65, 5048 AV Tilburg, The Netherlands

Product Description

The KA 5059 is a heater with multiple functions and safety features.
It includes a thermostat knob, control light, function button, and oscillation switch for ease of use.

Safety Information

WARNING: To avoid overheating, do not cover the heater.
The product complies with European regulations and directives.
For double-insulated appliances, two insulation systems are in place for safety.

Recycling and Disposal

The product and packaging materials are recyclable.
Dispose of them separately following the illustrated packaging symbols for proper waste treatment.
Check your local municipal guidelines for recycling information.

Testing and Compliance

The product has been tested by TUV Rheinland to ensure safety and quality standards are met.

Product Usage Instructions

Thermostat knob: Adjust to set the desired temperature.
Control light: Indicates when the heater is on.
Function button: Use to select different operating modes.
Oscillation switch: Enables or disables the oscillation feature.

Temperature Control

Rotate the thermostat knob to adjust the temperature settings.
The position of the knob corresponds to the required temperature.

Safety Precautions

Avoid covering the heater to prevent overheating. Ensure proper ventilation around the heater during operation.

Operating Modes

Use the function button to select different operating modes such as fan-only mode or heat mode based on your preferences.

Oscillation Feature

If your heater has an oscillation switch, you can turn it on to enable the oscillation function, which helps distribute heat evenly across the room.

Frequently Asked Questions

Q: Can I leave the heater unattended?

A: It is recommended not to leave the heater unattended while in operation for safety reasons. Please turn it off when not in use.

Q: How should I clean the heater?

A: Before cleaning, ensure the heater is unplugged and completely cooled down. Use a soft, dry cloth to wipe the exterior surfaces. Do not use water or liquid cleaners on the heater.

This product is only suitable for well-insulated spaces or occasional use

SAFETY

By ignoring the safety instructions the manufacturer cannot be held responsible for the damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Never move the appliance by pulling the cord and make sure the cord cannot become entangled.
The appliance must be placed on a stable, level surface.
The user must not leave the appliance unattended while it is connected to the supply.
This appliance is only to be used for household purposes and only for the purpose it is made for.
This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid.
WARNING: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Do not use the appliance with a programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Please do not install the appliance close to curtains and other combustible materials. This could cause a fire.
The heater must not be located immediately below a socket outlet.
WARNING: To avoid overheating, do not cover the heater.
This product complies with conformity requirements of the applicable European regulations or directives.
In a double-insulated appliance, two insulation systems are provided instead of an earth wire. No earthing means is provided on a double-insulated appliance, nor should a means for earthing be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should only be done by qualified service personnel. The replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is labelled with the words ‘CLASS II’ or ‘DOUBLE INSULATED”. It can also be identified with the double insulation symbol.
The Green Dot is the registered trademark of Der Grüne Punkt
Duales System Deutschland GmbH is protected as a trademark worldwide. The logo may only be used by customers of DSD GmbH holding a valid trademark usage contract or by engaged waste management companies within the Federal Republic of Germany. This also applies to the reproduction of the logo by third parties in a dictionary, an encyclopaedia or an electronic database containing a reference manual.
Separate collection / Check your local municipal guidelines.
The product and packaging materials are recyclable and subject to extended manufacturer responsibility. Dispose of it separately, following the illustrated packaging symbols, for better waste treatment. The Triman logo is valid in France only.
TUV Rheinland tested
The universal recycling symbol, logo, or icon is an internationally recognized symbol used to designate recyclable materials. The recycling symbol is in the public domain and is not a trademark.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local Authority or local store for recycling advice.

PARTS DESCRIPTION

Thermostat knob
Control light
Function button
Oscillation switch

BEFORE THE FIRST USE

Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
When the device is turned on for the first time, a slight odour will occur.
This is normal, ensure adequate ventilation. This smell is only temporary and will soon fade.

USE

Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V 50Hz).

Thermostat knob

To set the required room temperature, move the thermostat knob to below. The position of the knob corresponds to the required temperature.

Function knob

Use the function knob to choose the desired setting, you can choose between:

Off
Only ventilation
Low heat output
High heat output

Oscillation switch

Press the oscillation switch to turn the oscillating feature on and off.

CLEANING AND MAINTENANCE

Unplug the appliance and allow it to cool down. Use a soft, slightly damp cloth to wipe appliance surfaces. Do not allow water or any other liquid to get into the unit.
Clean the air suction opening from time to time with a fine brush.

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances.
This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled.
By recycling used domestic appliances, you contribute an important push to the protection of our environment.
Ask your local authorities for information regarding the point of recollection.

Support