VERKOKAPPA T3 Tesla Apple Carplay User Guide
- June 5, 2024
- VERKOKAPPA
Table of Contents
Tesla HUD Firmware Upgrade Guide
Preparation and Attention
1.1 Prepare a Type-C interface disk, the disk format is “FAT32”, if not, please format the U disk first.
1.2 Be careful to keep the original name of the filename. Put the firmware into the U disk. If the firmware name has a digital suffix ‘(1)’, it needs to be renamed to remove the digital suffix.
1.3 Insert the U disk with the copied firmware into the type-c interface on the right side of the instrument.
1.4 After the instrument device recognizes the U disk, it will restart
automatically. Select zkgui, zoos, zkloader, and other firmware and click
“Upgrade”, the device will start to upgrade and display the upgrade progress.
Note: Do not power off or pull out the U disk during the upgrade.
1.5 After the upgrade is completed and automatically restarts, the system will pop up the upgrade interface again, click the return button in the upper left corner, pull out the U disk, and complete the upgrade.
1.6 Note: After the system upgrade is completed, please delete the upgrade file, save another file to the U disk, and upgrade again. Do not put these two files into the U disk at the same time.
System Upgrade
2.1 Operation Procedures
-
First delete the old upgrade software, such as:
Update.img,TSLA01_V0.1@01_201725_APP_XXXX.bin. -
Put Update.IMG file into the Flash Disc in Root Manu. (Don’t rename the file or the upgrade will be failed.)
-
Power on the instrument panel, and plug the flash disk into the Type-C Port.
-
The device will pop up in the upgrade window, select all, and click upgrade.
Note: Do not power off or pull out the U disk during the upgrade.
- After the upgrade is completed and automatically restarts, the system will pop up the upgrade interface again, click the return button in the upper left corner, pull out the U disk, and complete the upgrade.
Driver Upgrade
3.1 Operation Procedures
-
First delete the old upgrade software, such as Update.img, TSLA01_V0.1@01_201725_APP_XXXX.bin.
-
Put the TSLA01_V0.1@01_201725_APP_XXXX. bin file in Root Manu of the Flash Disk.
-
Power on the Device, Plug in the flash disk into Type-C Port.
-
Device pop up upgrade window, click start.
Note: Do not power off or pull out the U disk during the upgrade. -
After the upgrade is completed and automatically restarts, the system will pop up the upgrade interface again, click the return button in the upper left corner, pull out the U disk, and complete the upgrade.