Godox WT25R RGBWW Dive Light Instruction Manual

: June 3, 2024
: Godox

Table of Contents

Godox WT25R RGBWW Dive Light
Safety Instructions and Attentions
Main Features
Product Structure
Item List
Operation Instruction
Illuminance Data
Technical Data
FCC Statement
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Godox WT25R RGBWW Dive Light

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

Before use, please read and understand these instructions and attentions.
Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.
This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product.
When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.
When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately.
If the lamp bead is damaged or deformed by heat, stop using this equipment, and contact the manufacturer, service agent or qualified maintenance personnel to replace the lamp bead in time to avoid accidents.
This product is only suitable for use in -10℃ to +40℃ operating environment .
Do not use damaged equipment or accessories, and wait for professional maintenance personnel to check and repair to confirm being normal before use.
During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components.
If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result.
Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel. Please use the certified power cord from the original manufacturer. If the product is damaged by using a non-certified power cord, it will not be repaired by our factory.
Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be
connected to a grounded outlet.Do not disassemble the product without permission. If the product fails, it must be checked and repaired by authorized maintenance personnel.
Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.
Do not place equipment near flammable and volatile solvents such as alcohol and gasoline.
Do not use accessories that are not recommended by our factory to avoid fire, electric shock or personal injury.
When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment.
Please take off the protective cover before using.
This product complies with RoHS， CE and FCC certification, please refer to the relevant national standards for use and operation.
The safety instructions are formulated according to the strict testing of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view latest electronic instruction.
Some products have built-in lithium batteries. Please use specified chargers, and use them within a proper range of the specified voltage and temperature according to the correct operating instructions.
Some products are battery powered. Do not use any batteries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required.
If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns. Continued use could result in fire, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or modify this product or battery. Do not heator solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together.
One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty.
If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance.
Machine failures caused by non-standard operation are not covered by the warranty.

keep these instructions!

Foreword
Thank you for purchasing!
RGBWW Dive Light series has a IP68 waterproof function of up to 40 meters, ultra-high output power, Bluetooth APP smart control, 13 realistic light effects and adjustable brightness from 0% to 100%. This series can be widely used for filling light in divingï¼Œunderwater photography, underwater recording, underwater light show and etc.

Main Features

Smart brightness adjusting ability to enter high light mode under water.
Waterproof rate IP68, workable up to 40m underwater.
HSI mode has 36000 colors.
Color temperature is precisely adjustable from 1800K to 10000K.
Support Bluetooth APP remote control in abovewater mode.
Smart battery level indication gives convenience and utility.
37 FX modes and freely adjustable brightness.
RGBW mode allows separated adjustment of red, green, blue and white LED.
WT25R and WT40R support fast charging through USB Type-C port.

Warning

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Keep out of reach of children.
Do not use the product in the presence of flammable gases, chemicals and other similar materials. In certain circumstances, please pay attention to the relevant warnings.
Built-in lithium battery, do not disassemble, impact,squeeze or put it into fire. If serious bulge occurs, please do not use.
Do not leave or store the product if the ambient temperature reads over 40â„ƒ.
Please use the proper charger and follow the operation instruction.
Make sure to seal the charging port with silicone lid and then close the cover before using under water.
Please wash it with clean water and put it in a dry and ventilated place after using in the sea.

Product Structure

Godox WT25R RGBWW Dive Light-1

OLED Panel
Power Switch
DIM Button
+ Button
MOD/Bluetooth Button
FN Button
– Button
Type-C Charging Portï¼ˆWT25R/WT40Rï¼‰
DC Charging Portï¼ˆWT60Rï¼‰

Display

CCT Icon
Bluetooth
Underwater Highlight Mode
Battery Life
Battery Level
CCT Value
G/M Adjustment
DIM Adjust Ratio
Over-temperature Alert Icon

HSI Mode Display

HSI Icon
Bluetooth
Battery Life
Battery Level
HUE
HUE Range（0°-360°）
DIM Adjust Ratio
Saturation
Saturation Range（0-100）
Underwater Highlight Mode

RGBW Mode Display

RGBW Icon
Underwater Highlight Mode
Battery Life
Battery Level
Red Light Icon
Green Light Icon
Blue Light Icon
White Light Icon
Red Light Range（0-255）
Green Light Range（0-255）
Blue Light Range（0-255）
White Light Range（0-255）
DIM Adjust Ratio

GEL Mode Display

GEL Icon
Bluetooth
Battery Life
Battery Level
R-GEL
L-GEL
DIM Adjust Ratio of GEL Mode
Underwater Highlight Mode

FX Mode Display

FX Icon
Bluetooth
Battery Level
FX No.
FX Type
FX Level
Underwater Highlight Mode
DIM Adjust Ratio

Item List

Model	Item List
WT25R	Light body1, Type-C charging cable1, Portable rope*1, 1/4” to 1” ball

joint 1
WT40R| Light body1, Type-C charging cable1, Portable rope1, 1/4” to 1” ball joint 1
WT60R| Light body1, Adapter1, Power cable1, Portable rope1, 1/4” to 1” ball joint 1

Godox WT25R RGBWW Dive Light-7

Separately Sold Accessories

Operation Instruction

Power Switch
Long press the power switch for 1 second to power on or off the device. When the light is on in power on status,short press the power switch once in power on status to turn off the light, the DIM value is 0%,short press again to resume the previous DIM value.
Brightness Adjustment
Short press the DIM button once to make the DIM value blinks.
Then short press the + button once can increase the DIM value by 1 unit, long press the + button can increase the DIM value quickly.
Short press the – button once can decrease the DIM value by 1 unit, long press the – button can decrease the DIM value quickly.
Finally, short press the DIM button once can exit the brightness setting. It will automatically exit the brightness setting when the DIM value stops blinking after 10 seconds of idle use.
CCT Mode/HSI Mode/RGBW Mode/GEL Mode/FX Mode
Short press the MOD/Bluetooth button to switch mode.
CCT Mode
Short press the FN button in CCT mode to choose CCT adjustment or G/M adjustment.
Short press the + button once can increase the CCT value by 100K or G/M value by 1 unit, long press the + button can increase the CCT value or G/M value quickly. Short press the – button once can decrease the CCT value by 100K or G/M value by 1 unit, long press the – button can decrease the DIM value or G/M value quickly. The CCT value is adjustable from 1800K to 10000K, and G/M value is adjustable from -50 to +50.
HSI Mode
Short press the FN button in HSI mode to choose HUE adjustment or saturation adjustment.
Short press the + button once can increase the HUE value by 1° or saturation value by 1 unit, long press the + button can increase the HUE value or saturation value quickly.
Short press the – button once can decrease the HUE value by 1° or saturation value by 1 unit, long press the – button can decrease the HUE value or saturation value quickly. The HUE value is adjustable from 0° to 360°, and saturation value is adjustable from 0 to 100.
RGBW Mode
Short press the FN button in RGBW mode to choose red light adjustment, green light adjustment, blue light adjustment or white light adjustment.Short press the + button once can increase the light value by 1 unit, long press the + button can increase the light value quickly. Short press the – button once can decrease the light value by 1 unit, long press the – button can decrease the light value quickly. The red light/green light/blue light/white light value are all adjustable from 0 to 255.
GEL Mode
Short press the FN button in GEL mode to choose R-GEL or L-GEL.
Short press the + button once in R-GEL mode to enter setting interface, short press the FN button to select among 20 R-GEL modes, then short press again to return to the previous interface.
Short press the + button once in L-GEL mode to enter setting interface, short press the FN button to select among 20 L-GEL modes, then short press again to return to the previous interface.
FX Mode
Short press the FN button in FX mode to switch light effects.
Short press the FN button twice to return to the previous light effect. Short press the + button or – button can adjust the FX level. FX Table of WT25R/WT40 R/WT60 R（37 kinds within 13 types）
Mode Description

Calibrating Function
The calibrating function is helpful when there are abnormalities in switching between abovewater mode and underwater mode.
Calibrating mode: Long press the MOD button and – button at the same time when the light is dry in abovewater mode to enter calibrating mode.

When the “Calibrating” is displayed on the panel, it means calibration is in process.

When the “√” and “DONE” is displayed on the panel,it means calibration is completed.

When the “×” and “Failed” is displayed on the panel,it means calibration is failed.

Bluetooth Setting
Long press the MOD/Bluetooth button to enter Bluetooth setting interface. Short press the FN button to choose Bluetooth switch (ON/OFF) or Bluetooth reset. If you choose Bluetooth switch, short press the + button or – button to turn on or off the Bluetooth. If you choose Bluetooth reset, short press the + button or – button to reset the Bluetooth. When “Reset” is displayed on the panel, it means resetting, after which, it will return to Bluetooth setting interface automatically.

Scan the following QR code to download “Godox Light” mobile APP (both Android and IOS systems are available).
For specific operations, please referto the “Help” manual of the mobile APP, which contains detailed instruction.
Note: the APP can be used directly on the firstly installed device (smartphone or tablet). When changing to other mobile devices, the light shall be reset before normal usage of APP.

Abnormal Charging Alert

When the icon appears on the display, there may be battery abnormality, charger abnormality or other abnormalities

Godox WT25R RGBWW Dive Light-20

Illuminance Data

WT25R

CCT	Mode	Illuminance Unit	0.5m	1m	2m

1800K

|

Underwater

| lux| 867| 222| 58.8
fc| 80.6| 20.7| 5.5
Abovewater| lux| 338| 83.8| 20.9
fc| 31.4| 7.8| 2

2800K

|

Underwater

| lux| 1380| 356| 93.3
fc| 128| 33| 8.7
Abovewater| lux| 595| 148| 38.2
fc| 55.2| 13.8| 3.6

3200K

|

Underwater

| lux| 1470| 376| 97.9
fc| 137| 34.9| 9.1
Abovewater| lux| 577| 149| 39.4
fc| 53.6| 13.9| 3.7

4300K

|

Underwater

| lux| 1560| 397| 104
fc| 145| 36.9| 9.7
Abovewater| lux| 627| 163| 43
fc| 58.3| 15.2| 4

5600K

|

Underwater

| lux| 1620| 415| 109
fc| 151| 38.5| 10.1
Abovewater| lux| 625| 164| 43.2
fc| 58.1| 15.3| 4

6500K

|

Underwater

| lux| 1660| 422| 109
fc| 154| 39.2| 10.1
Abovewater| lux| 642| 171| 44.6
fc| 59.7| 15.9| 4.2

7500K

| Underwater| lux| 1650| 418| 109
fc| 153| 38.8| 10.1
Abovewater| lux| 636| 167| 45
fc| 59.1| 15.5| 4.2

8500K

| Underwater| lux| 1610| 407| 107
fc| 149| 37.8| 9.9
Abovewater| lux| 656| 172| 45.2
fc| 61| 16| 4.2

10000K

| Underwater| lux| 1800| 447| 116
fc| 167| 41.5| 10.8
Abovewater| lux| 702| 177| 47.1
fc| 65.3| 16.4| 4.4

WT40R

CCT	Mode	Illuminance Unit	0.5m	1m	2m

1800K

|

Underwater

| lux| 1940| 503| 146
fc| 181| 46.8| 13.6
Abovewater| lux| 578| 152| 43
fc| 53.7| 14| 4

2800K

|

Underwater

| lux| 2850| 754| 206
fc| 265| 70| 19.1
Abovewater| lux| 801| 222| 59.8
fc| 74.4| 20.6| 5.6

3200K

|

Underwater

| lux| 3300| 880| 239
fc| 307| 81.8| 22.2
Abovewater| lux| 971| 260| 70
fc| 90.2| 24.2| 6.5

4300K

|

Underwater

| lux| 3550| 947| 255
fc| 330| 87.9| 23.7
Abovewater| lux| 1040| 280| 76.1
fc| 97| 26| 7

5600K

|

Underwater

| lux| 3660| 981| 264
fc| 340| 91.1| 24.5
Abovewater| lux| 1110| 295| 79
fc| 103| 27.4| 7.3

6500K

|

Underwater

| lux| 3810| 1030| 276
fc| 354| 95.3| 25.6
Abovewater| lux| 1130| 302| 80.7
fc| 105| 28.1| 7.5

7500K

| Underwater| lux| 3380| 913| 244
fc| 314| 84.8| 22.7
Abovewater| lux| 1030| 275| 73.5
fc| 95.6| 25.5| 6.8

8500K

| Underwater| lux| 3200| 866| 232
fc| 298| 80.5| 21.5
Abovewater| lux| 976| 261| 69.8
fc| 90.7| 24.2| 6.5

10000K

| Underwater| lux| 3220| 874| 232
fc| 299| 81.2| 21.6
Abovewater| lux| 981| 262| 70.1
fc| 91.1| 24.3| 6.5
CCT| Mode| Illuminance Unit| | |
---|---|---|---|---|---

1800K

|

Underwater