Govee H7122 Smart Air Purifier User Manual

Govee H7122 Smart Air Purifier

Safety Instructions

General Safety

• Only use Smart Air Purifier as described in this manual.
• Do not use without removing the plastic wrap from the filter. If not removed, the air purifier will not filter air, and may overheat, causing a fire hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier away from water or wet, damp areas. Never place in water or liquid.
• Do not use in excessively humid areas.
• Keep the air purifier away from heat sources such as stovetops, ovens, or radiators.
• Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
• Keep 5 feet/ 1.Sm away from where oxygen is being administered.
• Supervise children when they are near the air purifier.
• Do not place anything into the openings of the air purifier.
• Do not place heavy objects on the air purifier.
• Keep the inside of the air purifier dry. To prevent moisture build up, avoid placing in rooms with major temperature changes or underneath air conditioners.
• Always unplug the air purifier before servicing (such as when changing the filter).
• Do not use the air purifier if it is damaged or not working correctly, or if the power cord or plug is damaged. Do not repair yourself. Contact Customer Support
• WARNING: To reduce the risk of fire or electric shock, do not use this air purifier in combination with any 3rd party controls (such as a dimmer switch).
• Not for commercial use. Household use only.

Power Cord & Plug

• Place the air purifier near the electrical outlet it is plugged into.
• Never place the power cord near any heat sources.
• Do not cover the power cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
• Keep the power cord out of areas where people frequently walk. Place the cord where it will not be tripped over.
• This air purifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet in only one orientation. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug to the correct orientation. If it still does not fit, do not bypass this safety feature and do not try forcing the plug into the outlet. Instead, do not use it with the outlet.
• This air purifier uses standard US 120V, 60Hz outlets. If using outside the US, check for compatibility.

Package Includes

Specifications

Getting to Know Your Smart Air Purifier

• a. Fan Speed Indicator
• b. Fan Speed Button
• c. Sleep Mode Button
• d. Lock Indicator & Button
• e. On/Off Button
• f. Wi-Fi Indicator
• g. Timer Indicator
• h. Timer Button
• i. Night Light Button
• j. Filter Change Indicator & Button
• k. Air Outlet
• I.Housing
• m. Air Inlet
• n. Screw Nut
• o. Filter Cover
• p. 3-in-1 True HEPA Filter
• q. Power Cord

Getting Started

1.  Flip the air purifier over. Twist the screw nut counterclockwise and remove the bottom filter cover.
2.  Remove the plastic packaging from the filter and place the filter back into the air purifier.
3.  Reattach the filter cover and twist the screw nut clockwise to lock.
4.  Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 inches/38cm of clearance on all sides of the air purifier. Keep away from anything that may block airflow, such as curtains.

Using Your Smart Air Purifier

Using Govee Home App allows access to additional functions and features, along with the ability to control the air purifier remotely.

Functions & Controls

Power On & Off 

1. Plug in the power cord and all lights will flash once. The air purifier will then enter stand-by status automatically.
2. Tap On/Off Button to turn the air purifier On/Off. The fan will start at fan speed I once turned on.

Change Fan Speed

Tap Fan Speed Button to change fan speeds between I, II, and Ill.
Note:

• The fan speed indicators are not buttons and cannot be used to change fan speed.
• The fan speed indicators will light up when active.
• Fan speed Ill is the loudest, but purifies the air quickest.
• For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (fan speed Ill) for 15-20 minutes before using a lower speed.
• To effectively clean air, keep windows and doors closed while the air purifier is on.

Timer

1. Tap Timer Button repeatedly to select a time.
2. To cancel a timer, tap Timer Button until all timer indicators are off.
   • Note:
   • Once the timer has finished, the air purifier will turn off.
   • You can set a timer for 2, 4, or 8 hours using the Timer Button. You can also set a timer from 1 to 24 hours using Govee Home App.
   • The Timer indicators are not buttons and cannot be used to select a time.
   • The Timer indicators will light up blue when active.
   • The Timer Button symbol will light up when a timer is set using Govee Home App, but the Timer indicator will not light up.

Sleep Mode

1. Tap Sleep Mode Button once to turn Sleep Mode on.

2. Tap Sleep Mode Button again to exit Sleep Mode.
   Note:

   • Sleep Mode dims all icons to very low brightness and operates very quietly by using a fan speed lower than fan speed I.
   • Tap Fan Speed Button to exit Sleep Mode.
   • You can still adjust the night light and timer while the air purifier is in Sleep Mode.

Night Light

1. Tap Night Light Button once to turn on the night light.

2. Tap again to turn off the night light.
   Note:

   • You can turn the night light on and off using the Night Light Button, even when the air purifier is turned off (as long as it is still plugged into power).
   • You can also adjust night light brightness using Govee Home App. The purifier unit will remember this brightness setting.

Lock

Press and hold Lock Button for 3 seconds on lock/unlock the display.
Note:

• Locking the display prevents settings from being accidentally changed. When locked, the display will not respond to button presses.
• Lock Button will light up when the display is locked. If other buttons are pressed, Lock Button will flash 3 times.
• The air purifier can still be controlled using Govee Home App when the display is locked. To operate the displays buttons, you must unlock the display.

Memory Function

Even while turned off or unplugged, the air purifier will remember its previous fan speed, sleep mode, and night light brightness settings.
Note:
The memory function does not work with the timer or night light settings (except for the
night light brightness setting).

Filter Change Indicator & Button 

When the end of the filter’s service life has been reached, the filter exchange indicator will
light up red. After replacing with the new filter, press and hold the Filter Change Button for 3 seconds. The indicator will flash 3 times to indicate filter change time has successfully been reset.
Note:

• After the filter is reset, the filter usage time will be recalculated.
• You can also reset the filter change indicator with a 3-second long press, even when the indicator light is not on.

LED Indicators

About the Filters

The air purifier uses a 3-stage filtration system to purify air.

Pre-Filter

• Captures large particles such as dust, lint, fibers, hair, and pet fur.
• Maximizes the filter’s life by protecting it from large debris.

H13 True HEPA Filter

• Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
• Filters small particles such as fine dust, smoke particles, pollen and pet dander.

Activated Carbon Filter

• Physically adsorbs smoke, odors, and fumes.
• Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide and volatile organic compounds (VOCs).

Clean Air Delivery Rate

• This air purifier has a Clean Air Delivery Rate (CADR) of 120 cubic feet per minute (CFM), or 204m3/h.
• CADR measures the efficiency of an air purifier by indicating the volume of clean air it purifies per minute. This is based on removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier’s highest speed.

Air Change Per Hour

• The Air Change Rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 8 ft/ 2.4 m ceilings.
• For smaller rooms, the air change per hour will increase. This air purifier has an air change per hour of 5, which means it can change air 5 times per hour at the max speed in a single, closed room up to 258 ft2 / 24 m2. The air purifier is effective for larger rooms, but air purification will take longer, with fewer air changes per hour.
  Note: To effectively clean air, keep windows and doors closed while the air purifier is on.

Humidity

Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If the air purifier is used in excessively humid areas, the surface of the filter may become moldy.

Essential Oils

• Do not add essential oils to the air purifier or filter. The filter can be damaged by the oil and may eventually release an unpleasant smell.
• Do not use diffusers near the air purifier.

Care & Maintenance

Cleaning Smart Air Purifier

Do not clean the air purifier with abrasive chemicals or flammable cleaning agents.

Cleaning Steps

1.  Unplug before cleaning.
2.  Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
3.  Use a soft brush or vacuum hose to clean the inside of the air purifier.

Cleaning the Filter

Do not clean the filter with water or other liquids.
The outer pre-filter should be cleaned every 2-4 weeks to increase efficiency and extend the life of the filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles.

Replacing the Filter

The filter should be replaced every 6-8 months. The exact date at which your filter may need to be changed may vary depending on how often you use your air purifier.

Replacement Steps

1.  Unplug the air purifier. Flip the air purifier over and remove the bottom filter cover.
2.  Remove the old filter.
3.  Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier.
4.  Unwrap the new filter and place it into the housing.
5.  Reattach the filter cover and twist the screw nut clockwise to lock. Plug in the air purifier.
6.  Reset the Filter Change Indicator.

Note:

• To maintain the performance of your air purifier, only use official Govee filters. To buy replacement filters, visit Govee’s on line store.
• Remember to reset the Filter Change Indicator after changing the filter.

Filter Replacement Time Period

Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the Filter Change Indicator is off.
You may need to replace your filter if you notice any of the following:

• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter

Resetting the Filter Change Indicator

When the Filter Change Indicator is red, the service life timer needs to be reset.

Filter Change Indicator

• Press and hold the Filter Change Button for 3 seconds. Filter Change Indicator will flash 3 times and then turn off once successfully reset.
• Filter Change Indicator will light up as a reminder to replace the filter. Depending on how often you use the air purifier, the indicator should turn on within 6-8 months. You may not need to replace your filter immediately but you should check the filter when the Filter Change Indicator turns on.
• lf the Filter Change Indicator lights up but the filter was already recently changed, reset the countdown by pressing and holding the Filter Change Button for 3 seconds.

Storage

If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store in a dry place to avoid moisture damage.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions for the purifier unit. If your problem persists, please contact customer support.

For Smart Air Purifier

For App & Connectivity

1.  Cannot connect to Govee Home App.

   • Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth air purifiers.
     Enable the smartphone’s Location Services.

   • Try connecting with another smartphone.

   • Make sure your App is the latest version.

   • Make sure you have connected to the 2.4GHz network, and confirm the network is working correctly.

   • Make sure the Wi-Fi password you entered is correct.

   • Shorten the distance between the air purifier, Wi-Fi router, and the smartphone.

   • Make sure your air purifier and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.).

2.  Cannot find the air purifier within the nearby Bluetooth air purifiers list.

   • The air purifier may be connected with another smartphone. Disconnect it from the other smartphone first.

3.  The air purifier is offline.

   • Make sure the air purifier is plugged in and powered on, then refresh “My air purifiers” in Govee Home App by swiping down on the screen.
   • Make sure your router is connected to the internet, and your phone’s network connection is working.
   • If the Wi-Fi password has changed, the air purifier will automatically go offline. Try connecting it to the network again.
   • Delete the offline air purifier from Govee Home App, then add and reconfigure the air purifier again in Govee Home App.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/1V technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>