XENARC 892CFH 892GFC 8 Inch IP65 Sunlight Readable Capacitive Touchscreen Monitor Installation Guide
- June 3, 2024
- XENARC
Table of Contents
XENARC 892CFH 892GFC 8 Inch IP65 Sunlight Readable Capacitive Touchscreen
Monitor
Features
Model Comparison Chart
| 892CFH| 892GFC
---|---|---
HDMI Input| 2| 2
TYPE-C Input| ○| ●
DC3.5mm Audio Output| ●| ●
Sunlight Readable| ●| ●
Touch Screen
|
Capacitive
| Capacitive
Optical Bonding
IP grade| Front IP65| Front IP65
Standard Not Available
- Front IP65 / NEMA6P Rated Water and Dust Resistance
- Extreme Operating Temperature range of -31°F ~ 185°F (-35°C ~ 85°C)
- 1,000NIT Sunlight Readable with Long Life LED Backlight
- Wide Viewing Angle IPS (In-Plane Switching) LCD Panel
- Automatic Backlight Adjustment through Built-in Ambient Light Sensor
- Projected Capacitive Multi-Touch Touchscreen (USB)
- Optical Bonding, Anti-Reflective and Anti-Fingerprint Coating
- Plug-N-Play with Windows 7 and up and Android devices (Downloadable drivers for other OS)
- Multi-Monitor Touchscreen Support
- HDMI Input x 2 (HDCP), USB-C 3.2 x 1
- DVI Input through included DVI to HDMI Adaptor
- Built-In Speaker
- 1280×720 Native Resolution, 16×9 Aspect Ratio
- Solid Capacitors for Improved Durability
- High-Performance Image and Video Signal Processor
- AISS Advanced Image-Scaling and Shaping
- Last Input and Power Setting Memory
- IR Remote Control
- Auto Power-On upon signal detection
- Vertical Image Flip
- Function to Disable Front Button(s) and On Screen Text
- VESA 75mm Mounting Holes
- Panel Mountable with included hardware
- Connector Locking through included metal bracket to secure connectors against vibration
- Supports 9V DC ~ 36V DC
- “E” Mark Certified for Automotive use
- FCC, CE, E49 Certification
- ROHS Compliant
- 36 Month/3 Year Warranty
- 30 Day No dead Pixel Guarantee
Specifications
- Screen Size: Diagonal 8″ (16:9)
- Physical Resolution: 1280 (H) x 720 (V) HD
- Supported Resolution: 640 x 480 ~ 1920 x 1080
- Dot Resolution: 1280 x 800 = 1,024,000 (dots)
- Brightness: 1000 cd/m²
- Contrast Ratio: 1000:1
- Viewing Angle: 170° Horizontal, 170° Vertical
- Response Time (Tr/Tf): 15/10ms (Typ.)
- Touch Screen Interface: USB port
- Operating Voltage Range: DC 9V ~ 36V
- Power Supply: DC 12V
- Power Consumption: ≤ 20W
- Operating Temperature: -31°F ~ 185°F (-35°C ~ 85°C)
- Storage Temperature: -40°F ~ 203°F (-40°C ~ 90°C)
- MTBF (Mean Time Between Failures): > 55,000 Hours
- Dimension (mm): 220.7W x 142.7H x 33D
- Weight (lb): 1.89
Quick Start
(HDMI interface)
Attach the HDMI plug to the monitor’s HDMI input connector. Based on your installation requirement you can choose to use the straight plug or the 90- degree plug. Attach the HDMI plug on the other side of the cable to your device’s HDMI output connector.
(Touchscreen interface)
Attach the USB-A plug to your monitor’s USB-A connector. Based on your installation requirement you can choose to use the straight plug or the 90-degree plug. Attach the USB plug on the other side of the cable to your computer’s USB-A connector.
(USB-C – 892GFC Only)
The USB-C supports transferring of video signal, touchscreen coordinates, and power over one cable if supported by your device. Attach the USB-C plug to your monitor’s USB-C Connector and the USB-C plug on the other side of the cable to your device’s USB-C connector. Our USB-C cable must be used to ensure compatibility.
Attach the DC power plug to the monitor’s DC power input connector and connect the other side to your power source. (If you are using USB-C and your device has enough power output through USB-C, then it can power the monitor directly through USB-C. If DC power is provided to the monitor through the DC power input connector, then the monitor can provide 5V/2A 10W of power to your device over USB-C)
Install the included metal connector bracket to secure the cables against vibration if your usage application requires it. Our cables need to be used because our cable plugs are specially designed to work with this bracket.
Touchscreen Driver Installation (Optional) Please download and install the Touchscreen driver for your operating system from our website WWW.XENARC.COM if needed. It is normally plugged and play with Windows 7 and 10, and Android so most of the time, the driver would not be necessary.
Remote Control
- Power Button: Turn the monitor ON or OFF.
- Mirror Button: Enable or Disable the reverse of the display.
- Dimmer Button: Dim the brightness of the display by pressing this key continuously to set the brightness level of the display. ( Only available when auto sensor is disabled. )
- Display Button: Display the current input signal on the screen.
- Sleep Button: Enable or Disable the sleep timer. Press this button to select and set the time to turn off the monitor automatically.
- Picture Button: Enable or select the picture mode you prefer. Press this button and then you can select standard, mild, user, or dynamic.
- PC auto Button: Enable to adjust the picture automatically, only available in VGA mode.
- Menu Button: Enable the OSD menu. Press this button again to exit.
- Source Button: Enable to switch to different source input.
- Up / Down Button ( ▲ / ▼ ): Navigate Up or Down in OSD menu.
- Left / Right Button ( ◄ / ► ): Navigate Left or Right in the OSD menu, as well as decreasing or increasing the value of setting in OSD.
- Enter Button: Confirm the setting or selection.
Instructions for remote control shortcuts
- Dimmer ( Adjust the brightness )
By pressing the Dimmer button, it will adjust the brightness level from 0, 20, 40, 60, 80 and 100. Default is 100 ( Only available when smart light sensor is disabled )
- Sleep ( Set the sleep time out )
Select the time to automatically turn off the monitor. The minimum is 10 minutes and the maximum is 240 minutes.
- Picture ( Set the modes of the picture )
Enable to select the picture modes you prefer. Press this button and then you can select Standard, Mild, User, or Dynamic.
- PC AUTO ( Auto adjust, only on VGA )
- By pressing PC AUTO, it will auto adjust the image.
- Source ( Select the source )
Press this button to select the input signal to display. If one of these modes is disabled in OSD menu, please setup under ( ADJUST → Source Enable )
- Mirror (Vertical Image Flip)
Enable or Disable vertical image flip. Choose the direction you wish to display.
- Mute
Mute the speaker.
Press again to restore the sound of the speaker.
- Display ( Display mode )
Display the current input signal on the screen.
- VOL- / VOL+
Volume adjustment.
Capacitive Touch
- Supports plug and play for Windows 7 and up. A Touchscreen driver might need to be installed for other operating systems.
- Supports below operating systems.
| OS | Touch Function |
|---|
WINDOWS
| 10|
Available for multi-touch
8
7
CE 7 & 8
VISTA|
Only supports single mouse point
XP
MAC
| OS10.13|
Only supports single mouse point
X
Linux
| Kernel 2.6.36 Upwards| Available for multi-touch
Kernel 2.6.35 Downward|
Only supports single mouse point
Kernel 2.4.X
Android
| V2.3 Upwards| Available for multi-touch
V2.0 ~ V2.2| No support touch
Operation
Touch & type To select or activate something, touch it. To type something, such as a name, password, or search term, just touch where you want to type. A keyboard pops up that lets you type into the field.
Other common gestures include
- Touch & hold. Touch & hold an item on the screen by touching it and not lifting your finger until an action occurs.
- Drag. Touch & hold an item for a moment and then, without lifting your finger, move your finger on the screen until you reach the target position. For example, you can move object or icon around on the Home screen.
- Swipe or slide. Quickly move your finger across the surface of the screen, without pausing when you first touch (so you don’t drag something instead). For example, you can slide a Home screen left or right to view the other Home screens.
- Double-tap. Tap quickly twice on a webpage, map, or other screen to zoom. For example, double-tap a picture in Chrome to zoom in, and double-tap again to zoom out. (This function depends on Win7 or Win8 function)
- Pinch. In some apps (such as Maps, Chrome, and Gallery), you can zoom in and out by placing two fingers on the screen at once and pinching them together (to zoom out) or spreading them apart (to zoom in). (This function depends on Win7, Win8 or WIN10 function)
Hardware Installation
Buttons description
- Power Button: Press to turn ON or OFF the monitor.
- Select Button: Press to select the input signal to display. Press the left ( ◄ ) or right ( ► ) to highlight the input source desired and then wait 2 seconds to make the selection.
- Menu Button: Press the button to show the OSD menu. And then press the left ( ◄ ) or right ( ► ) to navigate through the menu. Press “ Select “ button to go through a list of settings and options. Press the left ( ◄ ) or right ( ► ) buttons to change the values of settings. Press Menu button again to leave the OSD menu.
- ►Right Button: Press this button to the value of settings inside the OSD menu.
- ◄Left Button: Press this button to the value of settings inside the OSD menu.
Ambient Light Sensor
Ambient light sensor can be enabled or disabled in the OSD by going into the “ SETUP ” category, and selecting the option “ Smart Light Sensor ”. When Auto Sensor is enabled, the LCD backlight brightness will be adjusted automatically according to the ambient lighting condition.
Note: The brightness cannot be adjusted manually through the dimmer button or through the OSD menu when the Smart Light Sensor function is enabled.
OSD ( On-screen display ) Menu
Press MENU button to bring up the OSD menu onto the screen. Press LEFT / RIGHT button (Or UP / DOWN button on the remote) to navigate the OSD menu or to Increase / Decrease the value of a selected item. Press SELECT Button (or ENTER button on the remote) to select a category or an item. Press MENU button to go back.
The settings and options in the OSD menu are categorized into 5 Categories : PICTURE, DISPLAY, ADJUST, SETUP, FUNCTION
Hardware Installation
PICTURE
• Picture Mode: Set the color mode to the desired setting : Standard,
Mild, User, Dynamic.
• Backlight: Adjust backlight by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of backlight output. Decrease
the number for a lower level of backlight output. Only works when Smart Light
sensor is turned off.
• Brightness: Adjust brightness by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of brightness. Decrease the
number for a lower level of brightness.
• Contrast: Adjust contrast by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of contrast. Decrease the
number for a lower level of contrast.
• Sharpness: Adjust sharpness by pressing left or right buttons. Press
left to decrease sharpness and right to increase the level of sharpness.
• Noise Reduction: To adjust the level of noise reduction
• DLC: To enable or disable Dynamic Luminance Control (Dynamically
boosting display contrast)
References
- Rugged Monitor, Industrial Touchscreen, Industrial LCD Monitor, Panel PC, Rugged Tablet for all industries
- Rugged Monitor, Industrial Touchscreen, Industrial LCD Monitor, Panel PC, Rugged Tablet for all industries