805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor Instruction Manual

: June 4, 2024
: XENARC

Table of Contents

Model Comparison Chart
Features
Specification
Quick – Start
Remote Control
Hardware Installation
Additional Info
Owner’s Record
Documents / Resources

High Brightness Touchscreen LCD Display Monitor
Instruction Manual

Model Comparison Chart

| 800YV| 800TSV| 802YH| 802TSH| 805YV| 805TSV
---|---|---|---|---|---|---
VGA ( D-SUB 15 Pin ) Input| 1| 1| 1| 1| 1| 1
VIDEO ( RCA ) Inputs| 2| 2| 2| 2| 2| 2
AUDIO ( RCA ) Inputs| 2| 2| 1| 1| 2| 2
PC AUDIO ( DC 3.5mm ) Input| 1| 1| 1| 1| 1| 1
Built-In Speaker| ●| ●| ●| ●| ●| ●
High-Quality Scaling| ●| ●| ●| ●| ●| ●
High-Quality Anti – Aliasing| ●| ●| ●| ●| ●| ●
Auto Power On| ●| ●| ●| ●| ●| ●
Touch Screen| ○| ●| ○| ●| ○| ●
AR Touch Screen| ○| ○| ○| ●| ○| ○
HDMI Input ( with sound )| ○| ○| ●| ●| ○| ○

Features

For In-Car Computing, PC, Server, GPS, POS, and various VGA Us
High Bright LCD Panel with LED Backlight
5-wire Resistive Touch Screen ( USB ) ( Optional: 5-Wire Resistive AR+AF GFG Touch Screen )
Multi-Monitor Touchscreen Support
VGA Input ( D-SUB 15-Pin ) x 1
Video Input x 2
Audio Input x 3
HDMI Input With Sound x 1 ( TSH/YH Only )
Built-in Speaker
NTSC / PAL Multi-System
4:3 Aspect Ratio
High-Resolution Display
Supports HDMI Version 1.1 ~ 1.3 ( TSH/YH Only )
Adjustable backlight level for night-time use
Realtek High-Performance Image and Video Signal Processor
A – Advanced Image-Scaling and Shaping
Factory Mode to disable front button(s)
Factory Mode to disable on-screen text
Last Input memory
Last Power setting memory
IR Remote Control
Auto power-on upon signal detection
Automatic display adjustment
On-Screen Display Control
Mirror Image Flip
Vertical Image Flip
AV2 Auto Switching for backup camera
Copper Stand: 360° / Height Adjustment
U-Shape mounting bracket ( 800 / 802 Only )
VESA 75mm mounting holes
26-Pin heavy-duty connector with connector locking
Anti Glare Coating
Supports 9V DC ~ 36V DC
“E” Mark Certified for Automotive use

Specification

Display Specifications

Screen Size: Diagonal 8” ( 4 : 3 )
Physical Resolution: 800 ( H ) x 600 ( V )
Pixel Pitch : 0.0675 ( H ) x 0.2025 ( V ) ( in )
Dot Resolution : 2400 x 600 = 1,440,000 ( dots )
Supported Resolution : 640 x 480 ~ 1920 x 1080
Supported Refresh: 60~75Hz
LCD Panel Brightness :800 / 805 LCD Panel Brightness : 400cd/m²802 LCD Panel Brightness : 1000cd/m²
Contrast Ratio : 500: 1
Response Time: 10~15ms
Viewing Angel : Vertical : 120 ゜ / Horizontal : 140 ゜
Colors : 6-bits ( 262,144 colors )

Physical Specifications

Video Source Input
— RGB analog male connector ( 15-Pin D-SUB ) x 1
— RCA composite video female connector x 2
— HDMI input connector x 1 ( TSH/YH Only )
Audio Source Input
— RCA audio female connector x 2
— DC 3.5 mini stereo plug x 1
— HDMI audio x 1 ( TSH/YH Only )
Touch Panel ( Input / Output )
— USB connector x 1 ( TSV/TSH Only )
Power Source Input
— Single 12V DC_IN ( Supports 9V~36V )
External Buttons Input
— OSD buttons for Power / Select / Menu / Increase / Decrease / Dimmer
— Power button for the power switch
Dimension ( In )
800 / 802 : 8.98 ( L ) x 6.46 ( H ) x 1.42 ( D ) In
805 : 7.87 ( L ) x 6.42 ( H ) x 1.44 ( D ) In
Weight ( lb )
800 / 802 : 2.64 lbs
805: 1.87 lbs

Electrical Specifications

Operating Voltage Range : DC 9V ~ 36V 2A
Power Supply: DC 12V
Power Consumption : Suspended Mode < 2W ( Max ), Continuous Mode < 14W ( Max )
Audio Input < 150MV

Other Specifications

Operating Temperature: -4℉ ~ 158℉
Storage Temperature : -22℉ ~ 176℉
FCC, CE, E13 Certification
ROHS Compliant
24 Month Warranty

Quick – Start

Optional Mounting Stand ( 800 / 802 Only )

Step 1.
Slide the Monitor into the optional mounting stand
Step 2.
Secure the “ Height ” position by adjusting the Knob
Step 3.
Secure the “ Tilt ” position by adjusting the Knob
Optional Mounting Stand ( 805 Only )

Step 1.
Slide the Monitor into the optional mounting stand
Step 2.
Secure the “ Height ” position by adjusting the Knob
Step 3.
Secure the “ Tilt ” position by adjusting the Knob
U Type Stand ( 800 / 802 Only )

Secure the “ Tilt ” position by adjusting the knob

Please install the knob with two washers as shown
Create VGA Source

XENARC 805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor - Fig
4 Step 1.
Attach the 26-Pin connector to the monitor
Step 2.
Attach the D-Sub 15-Pin connector to your computer’s analog VGA output connector Create Power Source

XENARC 805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor - Fig
6 Insert Power Adapter as show
Create Audio / Video Source

Step 1.
Attach your “ Video Source one ” ( e.g. VCR, Video Game Console) to the Yellow RCA connector marked Video 1 Step 2.
Attach your “ Video Source two ” ( e.g. VCR, Video Game Console) to the Yellow RCA connector marked Video 2 Step 3.
Attach your “ Audio Source ” to the White / Red connectors marked Audio.
The sound will be outputted through the monitor’s internal speaker

Step 4.
Attach your “ PC Source ” to the back VGA connector Step 5.
Attach the mini stereo jack marked “ PC Audio ” to your computer’s earphone jack

Touchscreen Installation ( 800 / 802 / 805 TSV Only )
Please download and install the Touchscreen driver for your operating system from our website WWW.XENARC.COM. Attach the USB plug to your USB connector Secure Knob Installation
Please use the attached knob and screws to fasten the cable on the rear of the cover

Note: Please use the included U-Shape metal bracket to secure the 26-PIN Connector in applications where a lot of vibration and movement are involved

Remote Control

XENARC 805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor - Fig
14

Power Button: Turn the monitor ON or OFF.
Mirror Button: Enable or Disable the mirroring of the display.
Continue to press it and choose the mirroring you want.
Dimmer Button: Dim the brightness of the display by pressing this key continuously to set the brightness level of the display. (Only available when the auto sensor is disabled.)
Mute Button: Mute the speaker. Press again to restore the sound of the speaker.
Display Button: Display the current input signal on the screen.
Sleep Button: Enable or Disable the sleep timer. Press this button to select and set the time to turn off the monitor automatically.
Picture Button: Enable or select the picture mode you prefer.
Press this button and then you can select Standard, user, bright, or soft.
PC auto Button: Enable to adjust the picture automatically, only available in VGA mode.
Menu Button: Enable the OSD menu. Press this button again to exit.
Source Button: Enable to switch to different source inputs.
Vol+ / Vol- Button : Increase or Decrease the Volume.
Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSD menu.
Left / Right Button ( ◄ / ► ): Navigate Left or Right in the OSD menu, as well as decrease or increase the value of the setting in OSD.
Enter Button: Confirm the setting or selection.

Instructions for remote controller shortcuts

Dimmer ( Adjust the brightness )
By pressing the Dimmer button, it will adjust the brightness level from 0, 20, 40, 60, 80, and 100.
The default is 100 ( Only available when the auto sensor is disabled )
Sleep ( Set the sleep time out )
Select the time to automatically turn off the monitor.
The minimum is 15 minutes and the maximum is 120 minutes.
Picture ( Set the modes of the picture )
Enable you to select the picture modes you prefer.
Press this button and then you can select standard, user, bright, or soft.
PC AUTO ( Auto adjust, only on VGA )
By pressing PC AUTO, it will auto-adjust the image.
Source ( Select the source )
Press this button to select the input signal to display.
If one of these modes is disabled in the OSD menu, please setup under ( Function → Source Enable )
Mirror ( Image mirror )
Enable or Disable the mirroring of the display. Continue to press it and choose the mirroring mode you wish to display.
Mute
Mute the speaker.
Press again to restore the sound of the speaker.
Display ( Display mode )
Display the current input signal on the screen.
VOL- / VOL+
Volume adjustment

Hardware Installation

Buttons Description:

Power Button: Press to turn the ON or OFF the monitor.
Select Button: Press to select the input signal to display.
Press the left ( ◄ ) or right ( ► ) to highlight the input source desired and then press the menu button to make the selection.
Menu Button: Press the button to show the OSD menu.
And then press the left ( ◄ ) or right ( ► ) to navigate through the menu.
Press the “ Select ” button to go through a list of settings and options.
Press the left ( ◄ ) or right ( ► ) buttons to change the values of settings.
Press the Menu button again to leave the OSD menu.
Right Button: Press this button to increase the volume/dimmer or the value of settings inside the OSD menu.
Left Button: Press this button to decrease the volume/dimmer or the value of settings inside the OSD menu.
Dimmer: This button controls display brightness.

OSD ( On-screen display ) Menu
Press MENU to display the OSD on the screen, then press UP / DOWN ( or LEFT / RIGHT from the front control panel ) to highlight a different category. Press ENTER ( or Source ) to adjust the selected highlighted category. Under the selected item page, press UP / DOWN ( or Source ) to select the item from the list, and use LEFT / RIGHT to adjust. To select the sub-menu, please press LEFT to enter the sub-menu.
The Settings and options in the OSD menu are categorized into 6 Categories: Color, Adjust, OSD, Setup, Function, Sound

Colors ● Brightness: Adjust the brightness by pressing the Left ( ◄ ) or Right ( ► ) buttons. Increase the number for a higher level of brightness. Decrease the number for a lower level of brightness.
● Contrast : Adjust brightness by pressing Left ( ◄ ) or Right ( ► ) buttons. Increase the number for a higher level of contrast. Decrease the number for a lower level of contrast.
● Sharpness : Adjust sharpness by pressing the left or right buttons. Press left to decrease sharpness and right to increase the level of sharpness.
● Color Temp : Set the color temp to the desired setting: 6500K, 9300K, and User.
● Backlight : Adjust backlight intensity by pressing Left ( ◄ ) or Right ( ► ) buttons. Increase the number for a higher level of backlight output. Decrease the number for a lower level of backlight output. Only works when the Auto sensor is turned off.
Adjust ● Auto Config: Adjust display automatically.
● H Position: Adjust the Horizontal position by pressing the left or right buttons.
● V Position: Adjust the Vertical position by pressing the left or right buttons.
● Phase: Phase ( fine ) adjustment. Image flickering can be removed by changing this setting (only valid for VGA setting )
● Clock: Adjust the horizontal sync width of the screen image.
OSD ● H Position: Adjust the OSD Horizontal position by pressing the left or right buttons.
● V Position: Adjust the OSD Vertical position by pressing the left or right buttons.
● OSD Timeout: Adjust the time out of the OSD.
● Transparent: Adjust the transparency of the OSD screen image.
● LR Key: Set Front Left/Right buttons as Volume or Dimmer Control.
● Key Backlight: Adjust the button’s backlight intensity.
Setup ● CCD/AV2 First: Set whether to have the monitor switch to CCD/AV2 signal automatically if a signal is present. ( Default is OFF )
● Source Info: Select to turn OFF or turn ON displaying of On Screen Source Information.
● Source Name: Display the source of the input signal. If it is ON, it will display the information on the left corner of the screen when the Display button is pressed on the remote control. ( Default ON )
● Mirror Hor: Adjust the horizontal mirroring position. If it is ON, the image will be on the left and right sides. ( Default ON ).
● Mirror Ver: Adjust the vertical mirroring position. If it is ON, the image will be on the left and right sides. ( Default ON )
Function ● Reset: Reset to Factory default setting.
● Display Ratio: Select the display mode to 16:9, 4:3, and Auto.
● Sleep: Select the time to automatically turn off the monitor. The minimum is 15 minutes and the maximum is 120 minutes.
● Keypad: The function allows you to disable or enable the buttons at the front of the monitor. Power, Menu, Select, Dimmer, Left, and Right buttons can be disabled or enabled.
● Source Enable: Select to Enable or disable the input signal. If an input signal is turned off, the source will be disabled.
● Touch Controller: Switch the power source for the touch control board.
Sound ● Volume: Adjust the audio volume of the built-in speaker.
● Mute: Enable or disable muting of the built-in speaker.
● HDMI Input: Select the audio source while in HDMI input mode. When set to HDMI, the built-in speaker will output the digital audio signal from HDMI. When set to Analog, the built-in speaker will output the analog audio signal from the mini stereo jack marked as “ PC Audio “
※The HDMI output option is only available for TSH / YH models

Additional Info

NOTE:
NOTE 1 :
If you are trying to connect the monitor to a laptop computer, please make sure to enable the 15-PIN D-SUB external monitor output located at the back of your laptop computer. Some laptop computers have three modes: Laptop Display Only, Laptop Display plus External Monitor, and External Monitor Only. If this is the case, please switch to the External Monitor Only mode.
NOTE 2 :
Touch Screen device driver must be installed onto your computer in order for the Touch Screen to become operational. Touch Screen drivers and software for different operating systems can be downloaded from our website at WWW.XENARC.COM.
NOTE 3 :
The maximum voltage supported by the monitor is 36V DC. Feeding the monitor with higher voltage will damage the monitor and void the warranty. Please use a fused power source if you decide to wire the monitor directly to your car’s electrical system. It is also crucial that you check the polarity of the connection.
NOTE 4 :
If the monitor is not displaying the VGA signal properly, the VGA signal might be out of range. Please try changing your display refresh rate to 60, 70, 72, or 75 Hertz.
NOTE 5 :
Please note that the LCD screen is made with high-precision technology. However black points or bright points of light ( red, blue, or green ) may appear constantly on the LCD screen, and irregular colored stripes or brightness may appear on the LCD screen. This is not malfunctioning. ( Effective dots: more the 99.999% )
For Technical Support, Please contact us at:
Xenarc Technologies Corp.
Toll Free : 888 – 656 – 6536
E-Mail: support@xenarc.com
Website: www.xenarc.com

XENARC 805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor - Fig
15

The length of the mounting screw. 【 M4 x 8 mm (max) 】 ( common between the right side and left side )

Owner’s Record

Owner’s Record
The model and serial number are located on the rear of the unit.
Please record these numbers in the spaces provided below, as well as the dealer name, address, and telephone number.
Please refer to these records whenever speaking to your dealer regarding this product.
Model Number: ————————————————–
Serial Number: ————————————————–
Dealer Name: ————————————————–
Street Address: ————————————————–
City: —————————————————————-
State: —————————————————————
Zip: —————————————————————-
Phone Number: ————————————————–
Purchase Date: ————————————————–

Documents / Resources

| XENARC 805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor [pdf] Instruction Manual
805TSV 8 Inch High Brightness Touchscreen LCD Display Monitor, 805TSV, 8 Inch High Brightness Touchscreen LCD Display Monitor, Brightness Touchscreen LCD Display Monitor, Touchscreen LCD Display Monitor, LCD Display Monitor, Display Monitor, Monitor
---|---