PHILIPS GC625 ProTouch Stand Steamer User Manual
- June 5, 2024
- Philips
Table of Contents
PHILIPS GC625 ProTouch Stand Steamer User Manual
PHILIPS GC625 ProTouch Stand Steamer
The appliance comes with a board that needs to be attached to the poles.
Assemble the board together (Fig. 5) and wrap the cover around it.
Ensure that the board tilting lever is in locked position (Fig. 6) before
attaching it to the poles.
The appliance comes with a board that allows usage in two orientations;
vertical and 30° inclination for an ergonomic steaming.
Changing board orientation can be done easily by pressing the board tilting
lever found at the most bottom of the board.
Caution: Do not stand directly behind the board when tilting it, as the
steamer head may hit your head. Stand by the side or in front of the board.
To adjust the height of the pole, ensure that board tilting lever is in locked position before attaching the board lock to the poles.
The appliance is suitable to be used with tap water. However, if you live in
an area with hard water, we recommend that you mix an equal amount of tap
water with distilled or demineralized water. This will prevent fast scale
build up and prolong the lifetime of the appliance.
Note: Do not add perfume, vinegar, mineral water, starch, descaling agents,
ironing aids, chemically descaled water or other chemicals into the water tank
as they may cause water spitting, brown staining, or damage to your appliance.
The power button flashes indicating that the appliance is heating up. When the appliance is ready for use after 90 seconds, the light turns steady
Multi steam settings are provided to save water and energy. You can increase the steam setting for more steam power at any point of time.
By using the ECO mode (reduced amount of steam), you can save energy without
compromising on the ironing result.
Note: The steam supply hose becomes warm during steaming.
This is normal
Press and hold the steam trigger to start steaming. Release the steam trigger for steam stop.
Steam lock
Double tap the steam trigger for continuous steam . Press the steam trigger
once to deactivate steam lock.
The steam lock comes with automatic release function, which can prevent
continuous steaming when the appliance is left unattended.
After 10 minutes activation of steam lock, steam will stop automatically. This
is normal.
Double tap on the steam trigger again and steam will be emitted continuously.
This appliance comes with OptimalTEMP technology steam plate. It enables you
to steam all types of ironable fabrics, in any order and without sorting your
garments.
Warning: Do not steam on non-ironable fabrics.
The board provides backing support to enhance the steaming performance.
For garments which require a more formal look and crisp result, such as
shirts, jackets and pants, it is recommended to use the board in the tilted
position.
To make crisp pleats, start steaming from the bottom half of the pants and
move onto the top half to prevent accidental
wrinkles on parts which have already been steamed.
Put the glove on the hand you are using to hold a garment. The glove protects your hand against the steam from the steamer head.
This side docking allows you to access steamer head conveniently without the
hassle of reaching high up.
We recommend you to switch off your continuous steam when you are using the
side docking.
Caution: Keep the steamer head away from children to avoid burning
The appliance comes with an auto shut-off feature.
When the steamer head is placed onto the holder and the appliance has not been
used for more than 10 minutes, the power button flashes and the appliance
starts to cool down.
Upon leaving the appliance untouched for the next 10 minutes, it will switch
off automatically. Press the power button to let the appliance reheat.
The appliance comes with wheels for easy maneuvering.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>