LIVEFINE LVFWIFIDC Smart WiFi Automatic Pill Dispenser User Guide

LIVEFINE LVFWIFIDC Smart WiFi Automatic Pill Dispenser

Safety Tips and Precautions

•  Do not let children use or play with this device.

•  Do not use any attachments not supplied or recommended by the manufacturer.

•  Do not place the appliance near open flames or heat sources. Fire, electric shock, product damage, or injury might occur.

•  Make sure to keep the pill dispenser on a flat, stable surface. Do not flip it upside down unless you are removing pills from their compartment. Please note, the internal pill container is removable for easy filling.

•  Be careful not to drop the pill dispenser, as this could damage the product or the pills inside.

•  Water can damage the dispenser, cause issues with the batteries, or otherwise adversely affect the medication contained inside. Do not immerse this pill dispenser in water or other liquids, or expose it to liquids that might get splashed on it. Do not place it in an environment where there is excessive moisture or humidity.

•  Do not fill the internal pill container unless it is completely dry.

•  Never force the locking cover open.

•  Never use mismatched batteries, or batteries with wrappings that have been torn or damaged in any way.

•  Do not mix old and new batteries.

•  Organizing medications correctly and assigning quantities and times is the sole responsibility of the user and/or their caregiver or healthcare provider. LiveFine is not liable for
  missed medications.

•  If you do miss a dose for any reason, please contact your healthcare provider and/or follow the directions provided by your physician or pharmacist.

•  Some medications should be stored tightly sealed and not exposed to the air. If you are uncertain about whether this dispenser is appropriate for storing your medications, please check with your healthcare provider or pharmacist.

•  A low battery symbol r::::::} will appear in the upper right corner of the LCD display when battery power is low. Be sure to change the batteries promptly to ensure the proper operation of the pill dispenser.

Package Contents

**Product Overview

**

Understanding the Daily Dosage Rings

Your Smart Pill Dispenser comes with 9 different rings, corresponding to the number of times per day that medication needs to be dispensed. The rings are designed to help you in laying out medication in the internal pill container so it is properly dispensed. The internal pill compartment has 28 slots for medication.

The dosage ring must first be placed in the center of the internal pill container with the tab in the bottom spot (indicated by the Ton the plastic container.) Align the two triangles marks on the dosage ring and faceplate, then fold tabs down to secure dosage ring in place before you start filling dispenser with medication. Once the dosage ring is properly situated, the alternating colors help you to distinguish between days. For example, if you are using the 2x Per Day ring (meaning medication only needs to be dispensed at two different times each day), this will accommodate 14 days’ worth of medication. The green numbers to the right of the tab are the first day’s medications. The white spaces are the following day’s medications. The colors alternate so that days do not get confused. The space marked “1” is where you would put the first dose for that day, the space marked “2” is where you would put all medications to be dispensed at the second time, etc. The pill compartments should accommodate all necessary medications in a single slot.
DO NOT PUT MEDICATION IN THE SLOTS INDICATED BY THE RED SPACES.
These spaces indicate remainder times. For example, if you need medication dispensed at 5 different times during the day, the ring can accommodate 5 days, or 25 medication times. Three slots are left over. These leftover slots are indicated by the red ring, and this is why there are substantially larger red areas on the 5x per day and 6x per day rings. Do not put medication in those slots.
To use the Daily Dosage Rings, choose the ring with the tab that correctly indicates how many times per day you need medication dispensed. Position the ring around the compartment. Fill each compartment accordingly and then place the carousel back into the dispenser with the dosage ring.

Ring#| # of Meds per Day| Programmable Time Period
---|---|---
1| 1| 28 days
2| 2| 14days
3| 3| 9days
4| 4| 7 days
5| 5| 5days
6| 6| 4days
7| 7| 4days
8| 8| 3 days
9| 9| 3 days

Plugging in the Cable

1.  Connect power cable to the pill dispenser.
2.  Plug the other end to a device with a USB port.
   NOTE The power cable is the primary source of power for this device. The cable should always be plugged 1n.

Installing the Batteries

1.  Turn the dispenser upside-down. Use the locking key by inserting it into the battery cover and turning clockwise.

2.  Remove the battery door.

3.  Insert four (4) AA alkaline batteries, making sure to match the polarities (+ and – sides) with the + and – markings inside the compartment.

4.  Replace the battery cover and insert the key into the cover. Then, turn the key counterclockwise to lock the cover.
   NOTES: If the low battery symbol appears on screen, then the batteries need to be replaced. Batteries are installed as backup power in case of power outages. The device will stay on for approximatefy four (4) days when powered by batteries.

5.  Use the + or – button to adjust the minute, similar to the hour.
   NOTE Pressing and holding the + or – button will cause the hour or minute digits to move taster.

6.  Press the CLOCK button to exit time setting with changes saved. Or press and hold the CLOCK button for two (2) seconds to cancel setting change and exit out of the time setting. NOTE The digits on display will flash to indicate which digits are currenijy being changed.

Setting the Alarm

1.  Press the ALARM button to start the alarm time setup.

2.  Press the+ or – button to select an alarm, then press the ALARM to confirm.

3.  Press the+ or- button to adjust the hour. Then, press the ALARM button to confirm the hour and set the minute.

4.  Press the+ or- button to adjust the minute, similar to the hour.
   NOTE Pressing and holding the + or – button will cause the hour or minute digits to move taster. The digits on display will flash to indicate which digits are currently being changed.

5.  Press the ALARM button once or press and hold down the ALARM button for two (2) seconds to save desired alarm settings and exit out of alarm setting mode. To cancel setting changes, simply wait a few seconds for alarm setting mode to end automatically.

To delete current alarm settings, press and hold the CLOCK button while in alarm setting mode until is shown on the display screen.

Setting the Alarm Tone and Volume

• Press and hold the + button for three (3) seconds to select between different alarm tones. The alarm tone is represented by A, B or C which is displayed on-screen.
• Press and hold the – button for three (3) seconds to select between different volume levels. The volume level is represented by the “Speaker” symbol which is displayed on-screen
• The three alarm tones have distinct beeping patterns: o Alarm A: A continuous beep that goes on for 20 seconds. After that, the beep will stop for 10 seconds, then it will resume to beep and continue in that cycle.
  o Alarm B : There are three (3) sets of beeps and three (3) beeps for each set. The beep will stop for seven (7) seconds, then it will resume to beep and continue in that cycle.
  o Alarm C: There is one (1 ) beep every three (3) seconds.

NOTE All alarm tone types will continue to beep in their respective patterns for 30 minutes before stopping. Also, all alarms will sound with the same alarm tone that was set until it is manually changed to a different tone.

Wi-Fi Connection Setup
Downloading the App

Wi-Fi Setup

1.  In the main clock menu, press and hold the+ button for three (3) seconds to enter pairing mode. The LED screen will flash and the speaker will say “AP mode” to confirm that you are in pairing mode. Press and hold the+ button for three (3) seconds or allow three (3) minutes of inactivity to pass to exit AP mode.

2.  Open the LiveFine app and tap the+ button to enter the “Add Device” page. Then, select your product to add it.

3.  When prompted, input your Wi-Fi network credentials.
   NOTE This device will on11 connect with 2. 4 GHz networks.

4.  Tap “next” to enter the AP mode page, then follow the on-screen prompts.

5.  After tapping “Go to Connect”, select the Wi-Fi network that matches the label on the bottom of the pill dispenser.

6.  Once connection is complete, return to the app homepage to use your device. The Wi-Fi indicator will light up on screen.

Remove Device
From the LiveFine app homepage, press and hold the device icon for two (2) seconds to enter the “Device Selected” page, select the device you want to remove, then tap “Remove Device.” Tap “Done” to return to the homepage.

Reset All Settings
Press and hold the CLOCK and ALARM buttons simultaneously for five (5) seconds to clear and reset all settings.

Activate the Factory Test Mode
Press and hold the + and – buttons simultaneously for five (5) seconds to enter Factory Test Mode. To quit Factory Test Mode, press and hold the CLOCK button for three (3) seconds.

Operating the Pill Dispenser

1.  Choose the Daily Dosage Ring that corresponds to your needs (please refer to “Understand­ing the Daily Dosage Rings” on page 5).
2.  Situate the Daily Dosage Ring in the center of the internal pill container and place your medications in the container to correspond with when they are taken (1st, 2nd, 3rd, etc.) indicated by the numbers on the ring (1, 2, 3, etc.). Do not place any medication in the red sections. When you see the red approaching the dosage window, it is time to refill the container.
3.  Install the batteries (please refer to “Installing the Batteries” on page 7).
4.  Unlock the cover using the key (please refer to “Locking and Unlocking the Cover” on page 7) and place the internal pill container inside the main body.
5.  Set the time (please refer to “Setting the Time” on page 8).
6.  Adjust the alarm volume, alarm tones, and choose 12- or 24-hour time (please refer to “Setting the Alarm Tone and Volume” and “Selecting the 12-Hour/24-Hour Mode”).
7.  Set your medication times (please refer to “Setting the Alarm” on page 8).
8.  Close the cover and lock it with the provided key (please refer to “Locking and Unlocking the Cover” on page 7).
9.  At the designated medication times, the alert will sound.
10. Slide open the window by pushing the tab to the right
11.  Tilt up the pill dispenser to pour the pills out into your hand or medication cup. Check to make sure all pills have come out of the compartment. The alarm should stop automatically.
12.  Close the dispensing window and place the pill dispenser on a flat surface.

Care and Maintenance

• Wipe the exterior with a soft, damp cloth. Do not use harsh detergents.
• If needed, remove the internal pill container and gently rinse/wipe the individual pill compartments. Allow the container to dry fully before replacing it or refilling it
• Do not immerse the outer pill dispenser in water or any other liquid.
• Make sure that the internal pill container is clean and dry before refilling it

Specifications

• Dispenser length: 9.25″
• Dispenser width: 9.25″
• Dispenser height: 3″
• Packaging length: 9.3″
• Packaging width: 9.6″
• Packaging height: 3″
• Weight: 1.9 lbs.
• Power: 4x AA alkaline batteries (included)
• Product type: Pill dispenser
• Approved location: Indoor use only
• Adult assembly required: No
• Additional tools required: None
• Number of compartments: 28
• Number of dosage rings: 9
• Connectivity: 2.4 GHz Wi-Fi
• Alarms: Audible and visual
• Cover lock: Yes
• Country of origin: China
• Warranty: Yes
• Warranty period: 1 year

LIMITED WARRANTY TO ORIGINAL CONSUMER

This LiveFine Smart Pill Dispenser (“Product”), including any accessories included in the original packaging, as supplied and distributed new by an authorized retailer is warranted by C&A Marketing, Inc. (the “Company”) to the original consumer purchaser only, against certain defects in material and workmanship (“Warranty”) as follows: To receive Warranty service, the original consumer purchaser must contact the Company or its authorized service provider for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented to the Company or its authorized service provider in order to obtain the requested service. Service options, parts availability, and response times may vary and may change at any time. In accordance with applicable law, the Company may require that you furnish additional documents and/or comply with registration requirements before receiving warranty service. Please contact our customer service for details on obtaining warranty service:
Email: supportlfc@camarketing.com
Phone number: 1-888-390-7622
Shipping expenses to the Company’s Return Facility are not covered by this warranty, and must be paid by the consumer. The consumer likewise bears all risk of loss or further damage to the Product until delivery to said facility.

EXCLUSIONS AND LIMITATIONS
The Company warrants the Product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase by the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim is received within the Warranty Period, the Company, at its sole option and to the extent permitted by law, will either (1) repair the Product defect at no charge, using new or refurbished replacement parts, (2) exchange the Product with a Product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original device, or (3) refund the purchase price of the Product. A replacement Product or part thereof shall enjoy the warranty of the original Product for the remainder of the Warranty Period, or ninety (90) days from the date of replacement or repair, whichever provides you longer protection. When a Product or part is exchanged, any replacement item becomes your property, while the replaced item becomes the Company’s property. Refunds can only be given if the original Product is returned.
This Warranty does not apply to:

• (a) Any non-LiveFine Smart Pill Dispenser product, hardware or software, even if packaged or sold with the Product;
• (b) Damage caused by use with non-LiveFine Smart Pill Dispenser products;
• (c) Damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes;
• (d) Damage caused by operating the Product outside the permitted or intended uses described by the Company;
• (e) Damage caused by third party services;
• (n A Product or part that has been modified to alter functionality or capability without the written permission of the Company;
• (g) Consumable parts, such as batteries, fuses, and bulbs;
• (h) Cosmetic damage; or
• (i) If any LiveFine Smart Pill Dispenser serial number has been removed or defaced.

This Warranty is valid only in the country where the consumer purchased the Product, and only applies to Products purchased and serviced in that country.
The Company does not warrant that the operation of the Product will be uninterrupted or error-free. The Company is not responsible for damage arising from your failure to follow instructions relating to its use.
NOTWITHSTANDING ANYTHING TO THE CONTRARY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE COMPANY PROVIDES THE PRODUCT “AS-ISJJ AND “AS- AVAILABLEJJ FOR YOUR CONVENIENCE AND THE COMPANY AND ITS LICENSORS AND SUPPLIERS EXPRESSLY DISCLAIM ALL WARRANTIES AND CONDITIONS, WHETHER EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, QUIET ENJOYMENT, ACCURACY, AND NON- INFRINGEMENT OF THIRD-PARTY RIGHTS. THE COMPANY DOES NOT GUARANTEE ANY SPECIFIC RESULTS FROM THE USE OF THE PRODUCT, OR THAT THE COMPANY WILL CONTINUE TO OFFER OR MAKE AVAILABLE THE PRODUCT FOR ANY PARTICULAR LENGTH OF TIME. THE COMPANY FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE.
YOU USE THE PRODUCT AT YOUR OWN DISCRETION AND RISK. YOU WILL BE SOLELY RESPONSIBLE FOR (AND THE COMPANY DISCLAIMS) ANY AND ALL LOSS, LIABILITY, OR DAMAGES RESULTING FROM YOUR USE OF THE PRODUCT.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM THE COMPANY OR THROUGH ITS AUTHORIZED SERVICE PROVIDERS SHALL CREATE ANY WARRANTY. IN NO EVENT WILL THE COMPANY’S TOTAL CUMULATIVE LIABILITY ARISING FROM OR RELATED TO THE PRODUCT, WHETHER IN CONTRACT OR TORT OR OTHERWISE EXCEED THE FEES ACTUALLY PAID BY YOU TO THE COMPANY OR ANY OF ITS AUTHORIZED RESELLERS FOR THE PRODUCT AT ISSUE IN THE LAST YEAR FROM YOUR PURCHASE. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR CLAIM. THE COMPANY DISCLAIMS ALL LIABILITY OF ANY KIND OF ITS LICENSORS AND SUPPLIERS. IN NO EVENT WILL THE COMPANY OR ITS LICENSORS, MANUFACTURERS AND SUPPLIERS BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA, OR RECORDS) CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT. Nothing in these terms shall attempt to exclude liability that cannot be excluded under applicable law. Some countries, states, or provinces do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties, so certain limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or province to province. Contact your authorized retailer to determine if another warranty applies.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>