MARQUANT 014368 Wireless Weather Station Instruction Manual

MARQUANT 014368 Wireless Weather Station

SAFETY INSTRUCTIONS

Carefully read the instructions before using the product. Save them for future reference.

SYMBOLS

TECHNICAL DATA

• Range: ≤ 60 m

• Mains adapter: 5 VDC, 600 mA

• Battery, weather station: 2 AA

• Battery, wireless temp. sensor: 2 AA

• Radio frequency: 433.92 MHz
  Measuring ranges

• Humidity: 20 – 95% RH

• Temp. indoors : 0 – 50°C (32 – 122°F)

• Temp. outdoors : -20 – 70°C (-4 – 158°F)

• Barometer pressure : 600 – 1100 hPa

DESCRIPTION

Wireless weather station that measures humidity, temperature (indoors and outdoors) and air pressure. Shows the weather forecast, time and weekday. Equipped with calendar, alarm function, frost warning and snooze function. A wireless temperature sensor is included, with a range of up to 60 m over an open space. Batteries are sold separately in Jula department stores and at www.jula.com.

WEATHER STATION DISPLAY

1. Time
2. Outdoor icon
3. Week
4. Temperature outdoors
5. Highest/lowest temperature outdoors
6. Highest/lowest humidity outdoors
7. Humidity outdoors
8. Moon phase
9. Barometer pressure for last 12 hours
10. RCC icon
11. Alarm icon
12. Indoor icon
13. Calendar
14. Temperature indoors
15. Weather forecast
16. Highest/lowest temperature indoors
17. Humidity indoors
18. Highest/lowest humidity indoors
19. Barometer pressure

WEATHER STATION BUTTONS AND FUNCTIONS

1. MODE button
2. ALARM button
3. ALERT button
4. Button SNOOZE/LIGHT
5. UP button
6. DOWN button
7. Mounting hole
8. Support
9. DC input
10. Battery compartment

SENSOR BUTTONS AND FUNCTIONS

1. LCD – temperature
2. Status light for signal transfer
3. LCD – humidity
4. Button °C/°F
5. Button TX
6. Battery compartment

HOW TO USE

BEFORE USING FOR THE FIRST TIME

1. Connect the mains adapter or open the battery compartment on the weather station and insert 2 alkaline AA batteries with the correct polarity as shown by the markings.
2. When the product receives current all the icons on the display go on for 3 seconds and there is an audio prompt. The indoor temperature and humidity are registered.
3. The weather station starts to search for the outdoor sensor. This takes about
4. minutes and a flashing icon for a radio mast is shown on the outdoor part of the receiver display.
5. Open the battery compartment on the wireless outdoor sensor and the battery compartment on the weather station and insert 2 alkaline AA batteries with the correct polarity as shown by the markings.
6. When the receiver has established a connection to the outdoor sensor it switches to receiving mode for radio controlled setting of the clock.

RECEIVING RADIO SIGNALS

The clock automatically searches for a DCF signal 7 minutes after restart, or after replacing the batteries. The radio mast icon starts flashing. Automatic synchronising with the DCF signal is carried out at 01.00, 02.00 and 03.00 to set the exact time. If the synchronisation fails (the radio mast icon disappears from the display) a new synchronisation attempt will be made one hour later. This is repeated automatically up to 5 times.

Manual search

1. Start a manual search for a DCF signal by pressing the UP button for 2 seconds. If no signal is received in 7 minutes the search for a DCF signal will stop (the radio mast icon goes off) and a new search will be made automatically in half an hour.
2. Press the UP button to cancel the search for a radio signal.

IMPORTANT:

• A flashing radio mast icon shows that searching for a DCF signal is in progress.
• A constant radio mast icon shows that the search for a DCF signal was successful.
• The recommended minimum distance to sources of interference such as television or computer screens is 2.5 metres.
• Note that radio reception is worse in basements and rooms with concrete walls. Place the weather station near a window if the reception is poor.
• Only the SNOOZE/LIGHT and UP buttons are activated during the search for a DCF signal. To use other functions, press the “-” button to stop searching for a DCF signal.

MANUAL SETTING OF CLOCK

1. Press the MODE button for 2 seconds. The 12/24 hour indicator starts flashing. Use the UP and DOWN buttons to select 12- hour or 24-hour displaying.

2. Press the MODE button to confirm.
   The unit for temperature starts flashing. Use the UP and DOWN buttons to select °C or °F.

3. Press the MODE button to confirm.
   The unit for barometer pressure starts flashing. Use the UP and DOWN buttons to select mbar/hPa, inHg or mmHg.

4. Press the MODE button to confirm.
   The value for time zone starts flashing. Use the UP and DOWN buttons to select time zone (-12 to +12).

5. Press the MODE button to confirm.
   The hour value starts flashing. Use the UP and DOWN buttons to set the hour.

6. Press the MODE button to confirm.
   The minutes value starts flashing. Use the UP and DOWN buttons to set the minutes.

7. Press the MODE button to confirm.
   The values for month and date start flashing. Use the UP and DOWN buttons to select the display format month/day or day/month.

8. Press the MODE button to confirm.
   The year value (2014) starts flashing. Use the UP and DOWN buttons to set the year.

9. Press the MODE button to confirm.
   The month value starts flashing. Use the UP and DOWN buttons to set the month.

10. Press the MODE button to confirm.
    The date value starts flashing. Press the up or down button to set the date.

11. Press the MODE button to confirm.
    The indicator for language of weekdays starts flashing. Use the UP and DOWN buttons to select language.

12. Press MODE to confirm the settings and exit settings mode. The clock display image is shown.

IMPORTANT:

• The settings mode closes after 20 seconds if no buttons are pressed, after which the clock display image is shown.
• Choose between 8 display languages for weekday: English, German, Italian, French, Russian, Spanish, Dutch and Danish.

SETTING DAILY ALARMS

1. Press the ALARM button once. The icon is shown and the settings mode for alarm is activated.
2. Press the ALARM button for 2 seconds. The hour value for the alarm starts flashing. Use the UP and DOWN buttons to set the hour.
3. Press the ALARM button to confirm. The minutes value for the alarm starts flashing. Use the UP and DOWN buttons to set the minutes.
4. Press the ALARM button to confirm and close settings mode.

Important information

• The settings mode closes after 20 seconds if no buttons are pressed, after which the clock display image is shown.
• The alarm will continue for 2 minutes if it is not deactivated by pressing a button. In which case the alarm will repeat automatically after 24 hours.
• Ascending alarm signal (duration 2 minutes): The volume changes 4 times during the duration of the alarm signal.

SWITCHING OFF THE ALARM

Press any button other than SNOOZE/LIGHT to switch off the alarm. The alarm is repeated at the same time the next day.

SNOOZE MODE

Press the SNOOZE/LIGHT button to activate snooze mode. The alarm sounds again after 5 minutes.

DISPLAY OF MOON PHASES

The weather station shows the phases of the moon automatically.

• A. New moon
• B. Waxing half moon
• C. Half moon
• D. Waxing full moon
• E. Full moon
• F. Waning full moon
• G. Half moon
• H. Waning half moon

DISPLAY OF TEMPERATURE/HUMIDITY/BAROMETER PRESSURE AND TRENDS FOR TEMPERATURE/HUMIDITY

• The actual values for temperature indoors/humidity indoors/barometer pressure and trends for temperature/humidity indoors.
• When a connection is established with the outdoor sensor the weather station shows the temperature outdoors/humidity outdoors and trends for temperature/humidity outdoors.
• The following indications are given.
  • Temperature/humidity increasing.
  • Temperature/humidity constant.
  • Temperature/humidity decreasing.

SIGNAL TRANSFER

• The weather station starts automatically receiving signals from the outdoor sensor for temperature and humidity when the batteries are inserted.
• When the batteries are inserted the outdoor sensor for temperature and humidity automatically sends signals to the weather station.
• If the weather station does not receive signals from the outdoor sensor for temperature and humidity (- – is shown on the display), press the DOWN button for 3 seconds to search for the signal manually. The icon flashes on the display when the weather station receives signals from the outdoor sensor.

DISPLAY OF HIGHEST/LOWEST TEMPERATURE/HUMIDITY

• When the temperature/humidity indoors/outdoors is shown on the display, and registering of the highest/lowest values is started, the highest value Hi and lowest value Lo are shown.
• The values for highest/lowest temperature/humidity are automatically set to zero at 00:00.

IMPORTANT:

• LL,L is shown on the display if the registered temperature is below the set limit value. HH,H is shown on the display if the registered temperature is over the set limit value.
• LLLL is shown on the display if the registered barometer pressure is below the set limit value. HHHH is shown on the display if the registered barometer pressure is over the set limit value.

DISPLAY OF BAROMETER PRESSURE IN THE LAST 12 HOURS

Press the “+” button repeatedly to show the values for barometer pressure during the last 12 hours. 0HR = actual barometer pressure, – 1HR = barometer pressure one hour ago,– 2HR = barometer pressure two hours ago, etc.
IMPORTANT: The settings mode closes after 20 seconds if no buttons are pressed, after which the actual barometer pressure is shown.

WEATHER FORECAST FUNCTION

Note the local weather forecast in addition to the forecast from the product. In the event of deviations between local weather forecasts and information from the product, the local weather forecast should be considered to be more correct. The weather forecast is estimated through an evaluation of the fluctuation in barometer pressure and can deviate from the actual weather.

Weather icons

• A. Sun
• B. Partly cloudy
• C. Cloudy
• D. Rain
• E. Heavy rain
• F. Snow
• G. Heavy snow

NOTE: The weather icons indicate the expected fluctuation in the weather for the next 8 hours, not the actual weather.

Trend for barometer pressure

The product can show the predicted trend of barometric pressure. The following indications are given.

BACKLIGHT

• If the product is battery powered, press the SNOOZE/LIGHT button to switch on the backlight for 15 seconds.
• If the product is powered with a mains adapter, press the SNOOZE/LIGHT button to adjust the brightness of the backlight (high/low/off).

References

• Jula – products for home and garden
• Jula - ingenting kan stoppe deg nå!
• Jula - Teraz nic Cię nie powstrzyma!
• Jula – inget kan stoppa dig nu!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>