Fitness Tracker s GM115 Smart Fitness Tracker User Guide

Fitness Tracker s GM115 Smart Fitness Tracker User Guide

How to wear it

BC;\t to wear the Smart band on the wrist; Fit tho strap to your wrist,~ the strap into the appropriate hole.
The sens,or should be in (i()l]ta(;t with 1he skin.

Charge the Smart band

Charge the Smart band Make sure the band has enough battery at first usage. Charge the battery first if it can’t be switched on, then the screen on the bracelet starts automatically. Pull off the strap that has the buckle from the watch itself, plug the USB on the watch into your computer or other charger to charge the Smart band.

Power on / off

1. In off mode, touch the function key for 4 seconds to start the device.
2. On the power off page, touch the function key for more than
3. seconds, select “off’ to turn off the band.

Usage

1. In on mode, touch the function key to start the first display mode with date and time.

2. In display mode date and time, touch the function key to scroll to the next page.
   The screen turns off if no action is taken in 5 seconds.

3. Switch to the pulse / blood pressure page to start the measurement.
   The result will be visible for 50sec before the screen automatically closes.
   Install the Smart band’s app on your mobile To download the app “Yoho Sport”, scan the QR code below using your camera on your mobile or search the app store..

System requirements: Android 5.0 or higher; i0S9.0 or higher; Bluetooth 4.0 support.

Connect your Smart band to the Yoho Sport app

For the first time you use the band, connect it to the app to calibrate time and date, otherwise the pedometer and sleep monitor will not be correct. The band syncs automatically when connected.

1. When the band has connected to the app, the app will save all info from the band.
2. Make sure that the band has all the necessary permissions for the system during installation or set the permissions in your mobile system settings, such as running in the background and read contact information.

APP FEATURES AND SETTINGS

Fill in your information in the app: Settings – personal information, you can set gender – age – height -weight, to ensure the accuracy of distance and calorie calculation.
You can also set your daily exercise and sleep goals and keep track of daily results.

Notices Incoming call:

If the incoming call function is activated in the connected state, the band will vibrate when there is an incoming call and the name or the number of the incoming call is displayed. Set permissions for the app to access the phone’s address book if you want this feature.

SMS

: In the connected state, if the SMS reminder function is activated, vibrates the tape when there is an SMS.

Other notices:

In the connected state, if you activate this function, the band will vibrate when there is WeChat, QQ, Facebook and other messages from your mobile, the message will come to appear on the bracelet. (You must enable mobile notification settings and set app permissions to access to system notifications..
In the connected state, the band will vibrate when there is a call, information or other reminders. If the band is off there will only be notice on the screen without movement so you will not be disturbed.

Sedentary note

Choose “Sedentary Reminder” in settings “Features” to set to set a notice of sedentary, the band will remind you at the selected interval. 71p for Android users:
The reminder function must be set so that “Yoho band” can be run in the background. It is highly recommended to add “Yoho band” in permission management to reliable list and allow all permissions to activate full function.
In the connected state, three alarm clocks can be sot and synchronized with the Smart band; Offline alarm is supported.
After successful synchronization, even if the app is not connected, the band will still sound according to the sot time.
This option allows you to set the display pages of your band. The activated function pages change one by one with the function key and disabled features are not displayed.
Find Smart band: In the connected state, select “Find band” in settings, the bracelet will vibrate for your attention_ Shake to tike Piffle / photo: In the connected state, select “Shake for Selfie” in the app, shake the band, and the app ads as a self-timer and takes pictures automatically after 3 seconds countdown.
Give the app access to the camera and photo album to take and save selfie / photo.

Raise your hand to activate screen

Select “Lift wrist to view info” in “Features” to turn on swcxu, the screen lights up automatically every time you raise your hand.
Screen settin& Change the background of your screen. Select “Band Display Settings”, you can select a preset image or your own image from your album. Select “Sync watch face “to sync with the Smart band.
SMART BAN I. FEATURES AND SETTINGS
Toucha funktionsknappen i 2 sekunder pa den sida dfu- du viii komma till undermenyn for den funktionen.
Date and time After syncing with your mobile comes the date and time automatically displayed. Touch for 2 seconds to switch between. the different themes you have on your screen.
Pedornetc Wear your Smart band to automatically measure your daily activity. You can see real-time steps the same day.
Based on the number of daily activities and your personal profile it will display the distance you have traveled.
Calories Based an your walking distance and your personal profile, they are displayed burned the calories.

A rate and blood I Go to the “Heart rate or Blood pressure”

page, hold down the function key for 2 seconds for the band to start measure, the result is displayed on the screen for 40 seconds.
After synchronizing with your mobile, the current weather is displayed: including: weather conditions, maximum / minimum temperature.
Go to “Music”. You can play, pause, switch songs back and forth.
The band automatically monitors your sleep status at night. It will measure your sleep status with deep / light sleep / wake times, calculate your sleep quality; the result can be checked in the app. Note: It only tracks your sleep status if you wear the band during night, not if you have placed it elsewhere. Sleep status from 21:00 to 9:00 is registered. Please sync the band with your app after 9:00 the morning after to update data before you check it.

Specifications

Note

1. Remove the Smut band before showering m bathing.
2. Connect the tape when synchronizing data.
3. Do not expoae the band to high humidity 01 emtmely high temperatures. Cmrtmt Smart Bmwl with built in USB / U se:r manual

App language

English, Dutch, Russian, French, German, Portuguese, Spanish, Turkish, Japanese, Polish, Arabic, Malaysian, Thai, Slovak.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>