DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone Owner’s Manual

June 5, 2024
DS18

DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone-
LOGO

DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone

DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone-PROD

SLC-MD10.4D

DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone-FIG1 DS18 SLC-MD10.4D 10-Inch Subwoofer with PPI Cone-
FIG2

SPECIFICATIONS

  • Nominal Diameter…………………………………………………………………….. 15″
  • Nominal Impedance ………………………………………………………..2 + 2 Ohm
  • RMS Power Handling …………………………………………………… 4000W
  • MAX Power Handling ……………………………………………………. 6000W
  • Sensitivity (1w/1m) …………………………………………………………..88.2 dB
  • Frequency Response…………………………………………………..16-500Hz
  • Recommended Lo Pass Crossover……………………….. 80Hz

MOTOR

  • Voice Coil Diameter…………………………………………… 4″ / 99.8mm
  • VC Former Material ……………….Black Aluminum
  • Winding Material ……………………………………………………………….. CCA
  • Cone Material ………………………………. Non-Pressed Paper
  • Dust Cap Material ……………………….Carbon Fiber
  • Surround Material  ………………………………………………. Foam
  • Basket Material……………………………………………….Aluminum
  • Basket Color and Finish ………….Sandblasted Black
  • Magnet Material…………………………………………………………..Ferrite
  • Magnet Weight…………………………………………………………………………. 500
  • Displacement Volume……………………………………….9.1L / 0.32 ft3

THIELE & SMALL PARAMETERS

  • Equivalent Volume………………………………….Vas ……….61.93 L /2.18 ft3
  • Excursion (one way))…………………………………………. Xmax…………………..59 mm
  • Free Air Resonance ……………………………..Fs ………………………..26 Hz
  • Mechanical Factor……………………………………….Qms ………………………4.98
  • Electrical Factor………………………………………….. Yes ………………………0.513
  • Total Factor …………………………………………………….Qts……………………….0.402
  • Mechanical Mass ………………………………………..MMS ………………..478.64 g
  • Mechanical Compliance ………………………Cms ……………0.025 mm/N
  • BL Factor …………………………………………………………BL ……………………….15.83
  • Voice Coil Inductance ……………………Le…………………..2.517 mH
  • Cone Area…………………………………………………….Sd ……………… 754.77 Cm2
  • DC Resistance………………………………………………Re ……………. 1.9+1.9 ohms
  • Efficiency Bandwidth Product / …………………………………….EBP………………………. 50.6

MEASUREMENTS

  • Overall Diameter………………………………………………………… 15.56” / 395mm
  • Overall Depth…………………………………………………………. 13.31” / 338mm
  • Front Mount Baffle Cutout…………………………….. 14.10” / 358mm
  • Mounting Depth……………………………………………….. 11.19” / 284mm
  • Motor Diameter………………………………………………………. 9.96” / 253mm

Recommended Box Dimension

Single Subwoofer Sealed BoxDS18 SLC-MD10.4D 10-Inch Subwoofer with PPI
Cone-FIG3

Parameters

  • Box External Dimensions(WxHxD): 16.54”x 16.54”x 13.50”
  • Material Thickness 0.75” / 19 mm
  • Net Internal Volume1.25 ft3
  • Wood Cuts
  • Top-Bottom (WxH): 16.54”x13.50”
  • Front-Rear(WxH): 16.54”x15.04”
  • Left-Right (WxH): 12.01”x15.04”

Single Subwoofer Ported BoxDS18 SLC-MD10.4D 10-Inch Subwoofer with PPI
Cone-FIG4

  • Box External Dimensions (WxHxD): 29.92”x 16.54”x 17.05”
  • Material Thickness 0.75” / 19mm
  • Net Internal Volume 2.50 ft3
  • Tuning Frequency 30 Hz
  • Port Area 37.20 inch2
  • Port Inlet (WxH): 2.47”x 15.04”
  • Port Length 37.07”
  • Wood Cuts / Cortes de la Madera
  • Top-Bottom(WxH): 29.92”x17.05”
  • Front 26.70”x15.04”
  • Rear 29.92”x15.04”
  • Left 15.55”x 15.04”
  • Right 16.30”x15.04”
  • Port 13.08”x15.04”
  • Port 20.03”x15.04”

Double Subwoofer Ported BoxDS18 SLC-MD10.4D 10-Inch Subwoofer with PPI
Cone-FIG5

  • Box External Dimensions (WxHxD): 38.58”x 16.54”x 22.06”
  • Material Thickness 0.75” / 19mm
  • Net Internal Volume 4.30 ft3
  • Tuning Frequency  28 Hz
  • Port Area 62.00 inch2
  • Port Inlet (WxH): 4.12×15.04”
  • Port Length 39.90”
  • Wood Cuts
  • Top-Bottom / Arriba-Abajo (WxH): 38.58”x22.06”
  • Front 33.71”x15.04”
  • Rear 38.58”x15.04”
  • Left 20.57”x15.04”
  • Right 21.31”x15.04”
  • Port 16.44”x15.04”
  • Port 17.84”x15.04”

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

DS18 User Manuals

Related Manuals