DS18 SLC-MD10 10-Inch Subwoofer with PPI Cone Owner’s Manual
- June 5, 2024
- DS18
Table of Contents
DS18 SLC-MD10 10-Inch Subwoofer with PPI Cone
SLC-MD10
SPECIFICATIONS
- Nominal Diameter…………………………………………………………………….. 15″
- Nominal Impedance ………………………………………………………..2 + 2 Ohm
- RMS Power Handling …………………………………………………… 4000W
- MAX Power Handling ……………………………………………………. 6000W
- Sensitivity (1w/1m) …………………………………………………………..88.2 dB
- Frequency Response…………………………………………………..16-500Hz
- Recommended Lo Pass Crossover……………………….. 80Hz
MOTOR
- Voice Coil Diameter…………………………………………… 4″ / 99.8mm
- VC Former Material ……………….Black Aluminum
- Winding Material ……………………………………………………………….. CCA
- Cone Material ………………………………. Non-Pressed Paper
- Dust Cap Material ……………………….Carbon Fiber
- Surround Material ………………………………………………. Foam
- Basket Material……………………………………………….Aluminum
- Basket Color and Finish ………….Sandblasted Black
- Magnet Material…………………………………………………………..Ferrite
- Magnet Weight…………………………………………………………………………. 500
- Displacement Volume……………………………………….9.1L / 0.32 ft3
THIELE & SMALL PARAMETERS
- Equivalent Volume………………………………….Vas ……….61.93 L /2.18 ft3
- Excursion (one way))…………………………………………. Xmax…………………..59 mm
- Free Air Resonance ……………………………..Fs ………………………..26 Hz
- Mechanical Factor……………………………………….Qms ………………………4.98
- Electrical Factor………………………………………….. Yes ………………………0.513
- Total Factor …………………………………………………….Qts……………………….0.402
- Mechanical Mass ………………………………………..MMS ………………..478.64 g
- Mechanical Compliance ………………………Cms ……………0.025 mm/N
- BL Factor …………………………………………………………BL ……………………….15.83
- Voice Coil Inductance ……………………Le…………………..2.517 mH
- Cone Area…………………………………………………….Sd ……………… 754.77 Cm2
- DC Resistance………………………………………………Re ……………. 1.9+1.9 ohms
- Efficiency Bandwidth Product / …………………………………….EBP………………………. 50.6
MEASUREMENTS
- Overall Diameter………………………………………………………… 15.56” / 395mm
- Overall Depth…………………………………………………………. 13.31” / 338mm
- Front Mount Baffle Cutout…………………………….. 14.10” / 358mm
- Mounting Depth……………………………………………….. 11.19” / 284mm
- Motor Diameter………………………………………………………. 9.96” / 253mm
Recommended Box Dimension
Single Subwoofer Sealed Box
Parameters
- Box External Dimensions(WxHxD): 16.54”x 16.54”x 13.50”
- Material Thickness 0.75” / 19 mm
- Net Internal Volume1.25 ft3
- Wood Cuts
- Top-Bottom (WxH): 16.54”x13.50”
- Front-Rear(WxH): 16.54”x15.04”
- Left-Right (WxH): 12.01”x15.04”
Single Subwoofer Ported Box
- Box External Dimensions (WxHxD): 29.92”x 16.54”x 17.05”
- Material Thickness 0.75” / 19mm
- Net Internal Volume 2.50 ft3
- Tuning Frequency 30 Hz
- Port Area 37.20 inch2
- Port Inlet (WxH): 2.47”x 15.04”
- Port Length 37.07”
- Wood Cuts / Cortes de la Madera
- Top-Bottom(WxH): 29.92”x17.05”
- Front 26.70”x15.04”
- Rear 29.92”x15.04”
- Left 15.55”x 15.04”
- Right 16.30”x15.04”
- Port 13.08”x15.04”
- Port 20.03”x15.04”
Double Subwoofer Ported Box
- Box External Dimensions (WxHxD): 38.58”x 16.54”x 22.06”
- Material Thickness 0.75” / 19mm
- Net Internal Volume 4.30 ft3
- Tuning Frequency 28 Hz
- Port Area 62.00 inch2
- Port Inlet (WxH): 4.12×15.04”
- Port Length 39.90”
- Wood Cuts
- Top-Bottom / Arriba-Abajo (WxH): 38.58”x22.06”
- Front 33.71”x15.04”
- Rear 38.58”x15.04”
- Left 20.57”x15.04”
- Right 21.31”x15.04”
- Port 16.44”x15.04”
- Port 17.84”x15.04”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>