DS18 NXL-T1 1-Inch VC Water Resistant Tweeter with Bullet Owner’s Manual
- June 5, 2024
- DS18
Table of Contents
DS18 NXL-T1 1-Inch VC Water Resistant Tweeter with Bullet
SPECIFICATIONS
- Nominal Diameter: 3.75″/95.2 mm
- Nominal Impedance: 4 OHMS
- AES Power Handling: 60W
- Program Power Handling: 120W
- Peak Power Handling: 240W
- Sensitivity (1w/1m): 103dB
- Frequency Response: 3Khz-20 KHz
- Recommended Hi-Pass Crossover: 2 kHz
- Pair or Single: Single / Individual
- Marine Grade Type: IP36
- UV & Salt Protection: Yes/ Si
MOTOR
- Voice Coil Diameter: 1″/25.4 mm
- Voice Coil Former Material: Kapton
- Winding Material: CCAW
- Diaphragm Material: Aluminum / Aluminio
- Magnet Material: Ferrite
- Magnet Weight: 8 0z
- Body Material: ASA
MEASUREMENTS MODE 1/MEDIDAS MODO 1:
- Overall Diameter: 3.78″ /96 mm
- Overall Depth: 1.78″ / 45 mm
- Front Mount Baffle Cutout: 2.72″/ 70 mm
- Mounting Depth: 1.57″/ 40 mm
MEASUREMENTS MODE 2 (WITH ENCLOSURE)/ MEDIDAS MODO 2 (CON CARCASA):
- Overall Diameter: 3.78″ / 96 mm
- Overall Depth: 2.26″/57.4 mm
INSTALLATION MODES
MODE 1/MODE 2
MODE 1 WITHOUT ENCLOSURE
MODE 2 WITHOUT ENCLOSURE
Documents / Resources
| DS18
NXL-T1 1-Inch VC Water Resistant Tweeter with
Bullet
[pdf] Owner's Manual
NXL-T1, 1-Inch VC Water Resistant Tweeter with Bullet
---|---
| DS18
NXL-T1 1 Inch VC Water Resistant Tweeter with
Bullet
[pdf] Owner's Manual
NXL-T1, 1 Inch VC Water Resistant Tweeter with Bullet, NXL-T1 1 Inch VC Water
Resistant Tweeter with Bullet
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>