medmassager rollvibe max massage roller Owner’s Manual

roll vibe max massage roller
Owner’s Manual

Specifications

gear motor speed: 2700RPM 3rd gear motor speed: 3100RPM 4th gear motor speed: 3700RM
auto shut-off time| 10 minutes
ambient temperature| 50° F to 104° F
maximum weight| 150kg or 3301bs
product accessories| power adapter and manual
manufacturing origin| China

The actual time and number of uses depending on the use environment.

Safety guidelines

Carefully read all guidelines before using them.
THIS MASSAGER IS NOT A TOY. ADULT SUPERVISION IS NECESSARY.
THIS MASSAGER IS NOT WATERPROOF.

• To reduce the risk of electric shock, always unplug the unit from the electrical outlet immediately after using and before cleaning.
• DO NOT reach for the unit if it has fallen into the water.
• DO NOT use while bathing or showering.
• DO NOT place or store the unit where it can fall or be pulled into the water.
• DO NOT drop water or other liquids onto the unit.
• DO NOT touch the massager with wet hands to avoid electric shock, product malfunction, or accident.
• Turn off the massager before unplugging.
• Before each use, check the power supply cord and be sure that every part is in good condition. All parts must be firmly assembled.
• To disconnect, turn all controls to the OFF position, then remove the plug from the outlet.
• If the unit is damaged or not working properly, contact MedMassager™ for service or repair. DO NOT open the unit to service it yourself.
• DO NOT use this unit if you have a serious disease, inflammation of the skin, hemorrhage tendencies, or if pregnant, unless otherwise directed by your physician.
• Use common sense when operating this unit. It is an electrical device and if used improperly may cause injury or even death.
• As with any health issue, always consult with your doctor if you are unsure about a change in your routine.
• To reduce the risk of burns, fire, electric shock, or injury to persons, the unit should never be left unattended when plugged in. Unplug the unit when not in use.
• Close supervision is necessary when the unit is used by children or people with disabilities.
• Use the unit only as described in this manual. Do not use attachments unless supplied by MedMassager™ and intended for use with this product.
• Never operate this unit if it has a damaged cord or plug.
• DO NOT attempt to clean or lubricate the internal parts.
• DO NOT modify or disassemble the massager.
• Store in a cool, dry, lint and dust-free place.

Before use

• Make sure the massager is not damaged before use.
• Charge fully before using.
• If there is an issue, stop using the massager immediately and contact MedMassager™ for repair.
• This massager uses vibration. Pay attention to your surroundings.

Charging method

1. Connect the power cord to the charging port and plug it into the wall.

2. Once charging begins, one indicator light should be illuminated.
   The battery is fully-charged when all four indicator lights are on.

3. After charging, please unplug the unit before use.

Vibration modes

The RollVibe Max Massage Roller offers four vibration settings.
You can make a selection by pressing the power button.

1. Press the power button to turn on the unit.
   The battery indicator lights will show the current power level.

2. Press the power button again to change the vibration setting.
   The vibration level indicator lights will show the current strength level. To increase the vibration setting, continue to press the power button until the desired level is reached.

3. To shut down the unit, press the power button until you cycle through all four vibration settings.

The vibration function will automatically shut off after 10 minutes. Using this massager for longer periods of time may result in injury.

Product care

• DO NOT allow the product to get wet.
• Unplug the unit when not in use.
• Use a dry cloth to wipe clean.
• Unplug the unit after it is fully charged.
• If the unit is unused for an extended period of time, store it in a cool, dry place.

Troubleshooting

massager and power adapter are still connected.
•The battery needs to be recharged. Note: The vibration function cannot be used during charging.
Vibration intensity has weakened.| •There is insufficient power and the battery needs to be recharged.
Vibration only lasts a few minutes, even after a full charge.| •Extremely low or high ambient temperatures can cause the product to malfunction. Please use it within the recommended ambient temperature range of 50° F to 104° F.
•The battery needs to be replaced.
Consult MedMassager™.
Note: DO NOT replace the battery yourself. Doing so may result in damage to the product.
The massager suddenly stopped working.| •The product stops automatically after 10 minutes.
There is an abnormal noise while using the massager.| •The product will emit an action sound when vibrating.

If you have tried all troubleshooting options and nothing is working, please contact MedMassager™ for further assistance.

 medmassager.com
877.501.6334
1.828.475.6022 (International)
[email protected]
189 Continuum Drive, Suite A, Fletcher, NC 28732

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>