VEX IQ 228-6480 IQ Robot Brain Instruction Manual
- June 5, 2024
- VEX IQ
Table of Contents
P/N 228-6480 IC) Robot Brain (2nd generation)
- Backlit LCD Ecran LCD ratro-Oclaira
- Check Button Bouton valider
- Status LED LED d’etat
- X Button Bouton X
- (12x) Smart Port Port Smart (x12)
- Left & Right Buttons Bouton
- Structure Mounting Structure de montage
- Battery Slot Emplacement de la batterie
- Speaker Haut-parleur
- USB Port Port USB
- MicroSD Slot Fente MicroSD
To turn on Robot Brain, press the check button. Pour allumer le cerveau du
robot, presser le bouton valider.
To turn off Robot Brain, press the X button. Pour eteindre le cerveau du
robot, presser le bouton X.
Robot Status LED/Etat de la LED d’6tat
Solid Green-Robot Brain on, NO Radio Link Vert fixe- Cerveau du robot allurne,
Pas de connexion radio
Blinking Green-Robot Brain on, Radio Linked Vert clignotant -Cerveau du robot
allurne, Connexion radio
Solid Red-Battery low, NO Radio Link Rouge fixe -Batterie faible, Pas de
connexion radio
Blinking Red-Battery low, Radio Linked Rouge clignotant- Batteriefaible,
Connexion radio
For additional information about using VEX 10 products, visit www.vexrobotics.com/vexiq/support
For Software Updates, visit www,veziq.com/firmware
PLEASE KEEP THESE INSTRUCTIONS.
To install Robot Battery: (228-7045 sold separately)
To remove Robot Battery:
Depress battery latch and pull out battery.
To pair Robot Brain and Controller 228-6470:
- 0n the Robot Brain go to Settings,
- Navigate to “Pair Controller”
- Follow on-screen instructions to pair
FCC Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15. the FQC These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications Hov*ver, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation. between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Shielded cables must be. used with this unit to ensure compliance with the Class B FCC limits.
Warning. Changes modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement :
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This. the device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Custom manufactured in China for Innovation First Trading SARL. Distributed in the U.S.A, Mexico, Caribbean, Central & South America by VEX Robotics, Inc., 6725 W. PM 1570, Greenville, TX 75402, U.S.A. Distributed in China by Innovation First International (Shenzhen), Ltd., Suite 1906, Excellence Tower, 98 Fuhua Yi Road, Futian, Shenzhen, Guangdong, China 518048. Distributed in the regions by Innovation First Trading SARL, Z.A.E. Wolser G, 315, 3434 — Dudelange, Luxembourg +352 27 86 04 87. Distributed in Canada by / Innovation First Trading, LLC, 6725 W. FM 1570, Greenville, TX 75402, U.S.A.
©2022 VEX Robotics, Inc. All rights reserved. Tous droits reserves.
Ages 8+ 1
Ans 8+ I
getStarted.vex.com
This product is solely intended to be used as part of the VEX IQ system
WARNING:
CHOKING HAZARD -Small parts
Not for childer under 3 years
Warning: CHOKING HAZARD – Small parts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>