Marshall EMBERTON II Bluetooth Portable Speaker User Manual

: June 5, 2024
: Marshall

Table of Contents

DEVICE LAYOUT
GENERAL
INSTRUCTIONS
- BLUETOOTH PAIRING
- PERFORMING A FACTORY RESET
STACK MODE
TROUBLESHOOTING
Documents / Resources

Marshall EMBERTON II Bluetooth Portable Speaker

DEVICE LAYOUT

GENERAL

BLUETOOTH BUTTON
Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode
CONTROL KNOB
I. Push and hold for 2 seconds to turn on/off
II. Push once to play/pause
III. Push right/left to skip forward/back
IV. Hold right/left to fast forward/rewind
V. Hold upwards/downwards to adjust the volume
BATTERY INDICATOR
The 10 segment Battery indicator shows the battery charge with a steady light and a rising animation indicates charging
USB-C POWER INPUT
Charge the speaker by plugging it into a USB power source

INSTRUCTIONS

BLUETOOTH PAIRING

I. Push and hold the control knob until the speaker turns on
II. Push and hold the Bluetooth button until the LED turns to a slow red pulse
III. Select Emberton II from your audio device’s Bluetooth list

PERFORMING A FACTORY RESET

A factory reset will reset the speaker to its original settings, excluding any firmware updates
Note: This will delete all user settings and the speaker will need to be set up again
I. Ensure that the speaker is on
II. Push and hold the Bluetooth button for 7 seconds All indicators turn off and the speaker restarts
III. Remove Emberton II from your sound device’s Bluetooth list before pairing again

MARSHALL HEADPHONES APP

Download the Marshall headphones app to get the most out of your
speaker and keep it up to date with the latest software

|

STACK MODE

Connect two or more Emberton II speakers in a Stack session for a bigger sound Play anything on the main speaker and all speakers in the session will play in sync You can adjust the volume on any individual speaker for the perfect balance

MAIN SPEAKER
Triple press the Bluetooth button to start or end a Stack session The LED starts to blink until any other speaker joins the session
ADDITIONAL SPEAKER
Double press the Bluetooth button on any speaker you want to add to the session The LED starts to blink until the speaker has joined a session While in a session, the speaker will disconnect from any previously connected audio device and will try to reconnect after leaving the session
To remove a speaker from the session, double press the Bluetooth button on that speaker’

TROUBLESHOOTING

PROBLEM	CAUSE	ACTION
The speaker does not turn on	The battery has no charge.	Plug the speaker

into a USB power source to charge it.
Cannot connect or pair with a Bluetooth device| Bluetooth is oot enabled on your, devlce (phone or compu’ter),| Activate Bluetooth on your audio device.
Bluetooth connection drops out| The speaker is not turned on.| Push and hold the control knob for 2 seconds to turn on the speaker before setting it in pairing mode.
Cannot play in Stack mode| The Bluetooth devices are too far apart, or the connection is affected due to obstacles.| Move the devices closer to each other so that they are unobstructed by obstacles such as walls or doors.
Bluetooth connection drops outv| The playback device is not connected to the main speaker.| Move the devices closer to each other so that they are unobstructed by obstacles such as walls or doors.
Erratic behaviour| There is a strong electric field surrounding the speaker. Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the Bluetooth device. This may lead to electrical disturbances.| Make sure that your playback device (phone or computer) is paired with the main speaker.
Bluetooth connection drops out| The speaker is not using the latest firmware version.| Move the speaker to another spot or turn off or move the interfering electronic device.
Erratic behaviour| There is a software error.| Download the Marshall Bluetooth app and connect to the speaker. Follow the in-app instructions to ensure that the speaker has the latest firmware version.
There is a software error.| Perform a factory reset by pressing the Bluetooth button for 7 seconds. The speaker needs to be set up again

MARSHALLHEADPHONES.COM

Documents / Resources

| Marshall EMBERTON II Bluetooth Portable Speaker [pdf] User Manual
EMBERTON II, Bluetooth Portable Speaker
---|---
| Marshall EMBERTON II Bluetooth Portable Speaker [pdf] User Manual
972EMBTN3B, EMBERTON II, EMBERTON II Bluetooth Portable Speaker, Bluetooth Portable Speaker, Portable Speaker, Speaker