SHARDOR PB615B Mini Blender User Manual
- June 5, 2024
- SHARDOR
Table of Contents
PB615B|Personal Blender
User Manual
Safety Precautions
Please read the safety precautions carefully before using and using the blender in the correct way. Please keep the instructions in a safe place after reading them so that users can check them at any time.
- The machine must be placed on a stable desk.
- Before turning on the power, please be sure to install the detachable parts such as the blade base, sports bottle, and blender base in place.
- It is forbidden to use the machine without water, so as to prevent the local high temperature caused by high rotation speed from burning the waterproof sealing ring.
- After processing, please wait for the motor and the blade to stop rotating, and make sure to remove the stirring part after disconnecting the power supply.
- Be sure to disconnect the power before disassembling or moving any parts of the product.
- Avoid contact with moving parts such as blades and motors during product operation to protect yourself from injury or damage caused by the blender, especially for the elderly and children.
- If the power cord is damaged, in order to avoid danger, it must be replaced by the manufacturer or its maintenance department or a similar professional. Do not disassemble and repair it yourself to avoid danger.
- If the product needs to be repaired during use, please contact the after-sales service department of the company, or go directly to the repair shop designated by the company for repair. Do not disassemble it yourself to avoid danger.
- Check the plug, power cord, mixing cup, and other parts for damage before use. If damage is found, please stop using the product and contact the after-sales service department of the company in time. Do not disassemble it yourself to avoid danger.
- Do not immerse the main unit in water or other liquids, or rinse the unit under water or other liquids.
- Never use steel balls, abrasive cleaners, or corrosive liquids such as benzine or acetone to clean the product.
- The product should be stored in a place that is unreachable to children. Do not let people (including children) who are not physically fit, feel are mentally impaired, or lack relevant experience and knowledge operate the product.
- When the machine is not in use for a long time, please unplug it and wipe it clean and place it in a cool dry place.
- This product is only for household use.
- The machine blade is sharp. So please pay attention to it when removing the blade and cleaning.
- If the machine is stuck in food during use, turn off the power, remove the blade base, and clean the jammed food.
- The temperature range of the glass is: 0 ° C – 100 ° It is strictly forbidden to put the glass into something beyond its temperature tolerance.
- Do not put overheated ingredients or liquid ( 80 ° C) in the cup to avoid bursting, splashing, and scalding.
Specifications
| Product Name | PB615B |
|---|---|
| Rated Voltage | 120V(US), 220-240V(EU) |
| Rated Frequency | 60HZ |
| Rated Power | 300W(US), 350W(EU) |
| Dimensions (length’ width’ height) | 141237cm/5.54.714.5inch |
| Rated Capacity | 600 ml/20 oz |
Parts Identification
|
---|---
Instructions
- Peel the fruits into small pieces and remove the fruit core.
- Add fruit and a moderate amount of drinking water or milk to the blender.
- Fasten the blade base on the sports bottle.
- Turn the sports bottle upside down, align the arrow on the blade base with the lock on the blender base, and place the sports bottle in the base.
- Press the button on the blender base.
- After the food processing finishes, you just need to release the button.
- Replace the blade base with the sealing lid, you will own a cup of juice.
Tips:
- Cut fruits and vegetables into pieces, no larger than 3/4 inch(1.8cm) to 1 inch(2.5cm).
- This blender will not mash potatoes, whip egg whites or grind raw meat.
- Don’t overload the sports bottle. If the motor stalls, turn the blender off immediately, unplug the unit and let it cool for at least 15 minutes. Then, remove a portion of the food and continue.
Maintenance
- After use, please unplug the appliance.
- Always disconnect the power supply before cleaning the product.
- The sport bottle and blade base can be rinsed directly with clean water.
- The outside of the blender base can be wiped with a wet towel. Do not immerse the blender base in water or other liquids, or rinse it with water or other liquids.
- After use, please clean the sports bottle and blade base in a timely manner, and then dry them after washing.
- This product should be stored in a dry place to avoid direct ultraviolet
- Before storing the product, the product should be clean and dry.
Analysis of Common Problems
| Problem | Cause Analysis | Troubleshooting |
|---|---|---|
| Does not work after power on. | Check if the bottle and the blender base are | |
| tightened. | Tighten the bottle and the blender base. | |
| A bad smell when using the motor several times. | It is a normal situation for | |
| the first few usages. | If there are still unpleasant smells after repeated |
use, please contact the after-sale service department.
Mixing cup leaking.| Check if the bottle and the blender base are tightened,
or if forgetting to install the sealing ring.| Tighten the bottle and the
blender base, place the sealing ring and keep it steady.
Note:
If the fault cannot be eliminated through the above phenomenon analysis,
please contact our maintenance location or dealer. It is strictly forbidden
for non-professionals to disassemble the machine.
Warranty
Limited 2-year Warranty
We warrant this product against any defects that are due to faulty material
or workmanship for the life of the product. This warranty does not include
damage to the product resulting from an accident or misuse. If the product
should become defective within the warranty period, we will replace it free of
charge.
Please contact us and attach your name, address, phone number, and order
number.
For contacting us, please see the Customer Service Section. We will be happy
to your service.
This warranty does not cover products damaged by the following:
- Accident, misuse, abuse, or alteration of the product.
- Servicing by unauthorized persons.
- Use with unauthorized accessories.
- Connecting it to incorrect current and voltage.
- Wrapping cord around appliance causing premature wear and breakage.
- Any other conditions beyond our control.
Customer Service
For FAQ and more information, please contact us. We will be happy to assist you.
After-sale Email:
US: warranty@shardorl.com
EU: warranty-eu@shardorl.com
JP: warranty-jp@shardorl.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>