VOKKERO ARF8158AA Guardian Europe Atex Walkie Talkie User Guide
- June 5, 2024
- VOKKERO
Table of Contents
VOKKERO ARF8158AA Guardian Europe Atex Walkie Talkie
INFORMATION
DISCLAIMER
This document and the use of any information contained therein is subject to
the acceptance of the VOKKERO terms and conditions.
VOKKERO makes no warranties based on the accuracy or completeness of the
contents of this document and reserves the right to make changes to
specifications and product descriptions at any time without notice.
VOKKERO reserves all rights to this document and the information contained
herein. Reproduction, use or disclosure to third parties without express
permission is strictly prohibited. Copyright © 2016, VOKKERO.
VOKKERO is a registered trademark in the EU and other countries.
TECHNICAL SUPPORT
Website
If you have technical problems or cannot find the required information in the
provided documents, contact our Technical Support on our website:
www.vokkero.com. This ensures that your request will be processed as soon as
possible.
Helpful Information when Contacting Technical Support
When contacting Technical Support, please have the following information
ready:
- Product type (for example Guadian)
- Firmware version (for example V1.0)
- A clear description of your question or the problem
- A short description of the application
EU Declaration of Conformity
WE
- Adeunis
- 283 rue LOUIS NEEL
- 38920 Crolles, France
- 04.76.92.01.62
- www.adeunis.com
Declare that the DoC is issued under our sole responsibility and belongs to the following product:
- Apparatus model/Product : Vokkero GUARDIAN
- Type: ARF8158AA
Object of the declaration:
The object of the declaration described above is in conformity with the
relevant Union harmonisation legislation:
Directive 2014/53/UE (RED)
Directive 2014/34/UE (ATEX)
The following harmonized standards and technical specifications have been
applied:
ATEX MARKING
WARNINGS
Read the instructions in the manual.
- The safety of this product is only guaranteed when it is used in accordance with its purpose.
- Only use of accessories in accordance with intrinsic safety parameters is permitted. This is under the responsibility of the user.
- Similarly, only the Vokkero Guardian charger must be used to recharge Guardian products.
- Only use of batteries specified by the manufacturer Vokkero is allowed, reference ARF8125BA.
- Maintenance, such as modifying or dismantling the product, should only be carried out by qualified persons.
- The ambient temperature range for charging the battery is from 0 to 40 ° C.
- Please note: Do not install the equipment close to a heat source or in damp conditions.
- Please note: When the equipment is open, do not carry out any operations other than the ones set out in this document.
- Please note: Do not open the product as there is a risk of electrical shock.
- Please note: For your own safety, you must ensure that the equipment is switched off before carrying out any work on it.
- Please note: For your own safety, the power supply circuit must be SELV (Safety Extra Low Voltage) and must be from limited power sources. The product must be equipped with a switching mechanism so that the power can be cut. This must be close to the equipment. Any electrical
connection of the product must be equipped with a protection device against voltage spikes and short-circuits.
SYSTEM DESCRIPTION
VOKKERO® Guardian ATEX Terminal
General characteristics
PAIRING GUARDIAN ATEX WITH GUARDIAN STANDARD OR GUARDIAN PLUS
By default, the GUARDIAN ATEX terminals (ARF8158) embed a 16Khz audio quality and therefore communicate with terminals having the same configuration (GUARDIAN ATEX or GUARDIAN PLUS ARF8154 / 8156). GUARDIAN ATEX terminals can also communicate with GUARDIAN Standard (ARF8150 / 8152). A «quick configuration» from the configurator is required to reconfigure all GUARDIAN ATEX terminals in communication with GUARDIAN Standard terminals. It should be noted that the audio quality of GUARDIAN ATEX terminals changes to Standard quality (8Khz) as soon as they are paired with GUARDIAN Standard terminals. In the presence of GUARDIAN Standard on the configurator at the time of the «quick configuration», the GUARDIAN ATEX terminals will take the Standard audio mode (8Khz). Note, it is not possible to pair the three types of terminals at once: GUARDIAN Standard, GUARDIAN PLUS and GUARDIAN ATEX. GUARDIAN Standard and GUARDIAN Plus do not communicate together. Encryption type: Fixed key or No encryption If you want to add a GUARDIAN ATEX to an existing conference containing GUARDIAN ATEX and GUARDIAN Standard, it is mandatory to bring back at least one GUARDIAN Standard on the configurator and redo a «quick configuration» with the GUARDIAN ATEX. If you want to add a GUARDIAN Standard to an existing conference consisting only of GUARDIAN ATEX terminals, it is mandatory to bring back all GUARDIAN ATEX to the configurator and redo a «quick configuration» with the GUARDIAN Standard. Encryption type: New key at each config. In any case, it is necessary to bring back all the terminals that you want to pair on the configurator for a new «quick configuration».
References
- Spécialiste des solutions & capteurs connectés IoT | Adeunis
- Solutions audio & vidéo pour professionnels | VOGO