ECOFLOW B09DYJH2VQ RIVER Mini Fast Charging Station User Manual
- June 5, 2024
- ECOFLOW
Table of Contents
ECOFLOW B09DYJH2VQ RIVER Mini Fast Charging
Specifications
Safety Instructions
- It is strictly prohibited to place this product near heat sources, such as fire or heating furnaces.
- It is strictly prohibited for this product to come into contact with any liquid. Do not immerse this product in water or allow it to get wet. Do not use this product in the rain, damp conditions or wet environments.
- It is prohibited to use this product in strong static or strong magnetic field environments.
- It is prohibited to disassemble this product in any way or puncture this product with sharp objects.
- It is prohibited to use wires or other metal objects to cause this product to short circuit.
- Do not use unofficial components or accessories. If replacements are necessary, please visit EcoFlow’s official sales channel for the relevant purchase information.
- When using this product, please strictly follow the ambient temperature for use in this user manual. Overly high temperatures may cause the battery to catch fire or even explode; while overly low temperatures will seriously degrade product performance to the point that it can no longer meet normal use requirements.
- It is prohibited to stack other heavy objects on this product.
- It is prohibited to forcibly block the fan during use, or keep the product in unventilated or dusty spaces.
- Please avoid impacts, falling, dropping or strong vibrations. In the case of severe external impact, please turn off the power immediately and stop using the product. Please keep the product properly secured during transport to avoid vibration and impact.
- If the product accidentally falls into water during use, place it in a safe open area, and keep away from the product until it has completely dried. Once dried, the product should not be re-used, and should be properly disposed of according to the method described in Section 2.2 “Disposal.” If the product catches fire, please use a fire extinguisher or fire-fighting equipment in the following recommended order: water or mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher.
- If the interface of this product becomes dirty, wipe it off with a dry cloth.
- Handle this product with care to prevent it from being damaged due to overturning. In the event that the product is overturned and seriously damaged, immediately turn off the power and place the battery in an open area, being sure to keep it away from combustible materials and people; and dispose of it in accordance with the requirements of local laws and regulations.
- Keep this product out of reach of children and pets.
Disposal Guide
- When conditions permit, be sure to fully discharge the battery of this product before placing the product in a designated battery recycling box. This product contains a battery, which is a hazardous chemical and is strictly prohibited from being placed in an ordinary garbage can. For relevant details, please comply with the local laws and regulations regarding battery recycling and disposal.
- If the battery cannot be fully discharged due to the fault of the product itself, do not dispose of the battery in a battery recycling box directly. Contact a specialized battery recycling company for further disposal.
- An over-discharged battery cannot be started. Please dispose of it as waste
Getting Started
Product Details
LCD Screen
General Product Usage Short press the main power button to power on the device. After the device is started, the LCD screen will be lit and the main power indicator will enter breathing light mode. The product will go into sleep mode if it idles for 5 minutes without any activity, and the LCD screen will automatically go off. In the case of a change in product load or operation, the LCD screen will automatically light up. To turn the LCD screen on or off, please short press the main power button. Long press the main power button to turn the product off. The default standby time of this product is 30 minutes. If no other output power button is turned on and the product is not connected to any load, the product will power off automatically after 30 minutes, and the standby time can be set on the app.
USB Output Port
After ensuring that the main power is turned on, short press the USB power button before using the USB output port. Short press the USB power button again to turn off the power. If the USB power button is turned on, this product will not power off automatically.
12V DC Output Port
After the main power is turned on, short press the 12V DC output power button
to enable the DC output port. Short press the 12V DC output power button again
to turn off the power. If the 12V DC output power button is turned on, this
product will not power off automatically.
AC Output Port
Short press the AC output power button After ensuring that the main power is
turned on, short press the AC output power button to enable the AC output
port. Short press the AC output power button again to turn off the power. The
default standby time of the AC output port is 30 minutes. Once the product’s
AC output port is without any load for 30 minutes, the AC output power button
will turn off automatically. When the AC output is not used, please promptly
turn it off to avoid battery power loss due to inverter power consumption.
AC Charging
EcoFlow’s X-Stream quick charging technology is specially designed for AC
charging. This product has a maximum charging power of up to 300W and can
charge up to 80% capacity within 1 hour.
Solar Charging
Users can charge this product by connecting it to a series of solar panels as
shown in the figure. When using EcoFlow solar panels to charge this product,
please connect the product according to the specifications in the user manual.
Before connecting the solar panels, please confirm whether the output voltage
specifications of the solar panels are within the product specification range
to avoid damage to the product.
Car Charging
This product can be charged by using a car charging port, which should be used after the car’s ignition is turned on to avoid start failure due to a lack of voltage in the car’s battery. In addition, ensure that the car charging port and the cigarette lighter of the car charging input line are in good contact. Our company is not liable for damage due to the failure to comply with these specifications.
APP
You can control and view the information and data of the product through the EcoFlow app. For information on how to download, connect and use the EcoFlow app, please refer to the official EcoFlow WeChat account.
X-Boost
To prevent operational failure due to discharge overload protection, when the total output power exceeds the rated output power, the X-Boost function will start automatically, so that the product can supply power to high-power devices with the rated output power. Please note the following when using the X-Boost function:
- The X-Boost function is enabled for this product by default. This function can be enabled or disabled by using the EcoFlow app.
- The X-Boost function is unavailable under the following conditions: AC output is turned on while AC charging (bypass mode) or the X-Boost mode is turned off.
- The X-Boost function is suitable for heating and motor equipment, but not for all electrical appliances. X-Boost is not suitable for certain electrical appliances equipped with voltage protection (such as precision instruments). To verify whether the X-Boost function can be used for a device, please refer to the actual test.
Emergency Power Supply (EPS)
This product supports the emergency power standby (EPS) function. When you
connect the power grid to the AC input port of this product via the AC
charging cable, you can power electrical appliances by using the AC output
port of this product (in this case, the AC power source comes from the power
grid instead of the battery). When the power grid is suddenly cut off, this
product can automatically switch to the battery power supply mode within 30ms.
This is a non-specialized UPS function, and does not support 0ms switching.
Please do not connect it to a device with high requirements for UPS, such as
data servers and workstations, or use it after repeated tests to confirm that
it meets the requirements. It is recommended that only one device be used
during the use, and that multiple devices are not used simultaneously to avoid
triggering the product’s overload protection. The company bears no liability
for any failure of the device to operate normally or loss of data due to the
failure to use the product according to instructions.
FAQS
-
What type of battery is used in this product?
This product uses a high-quality lithium-ion battery. -
What devices can be equipped at the AC output port of this product?
The AC output port of this product has a rated power of 300W and a peak power of 600W. It can power most consumer electronic products. However, it is recommended that you confirm the power of the electrical appliance in question before use, and ensure that the sum of the power of all load devices is less than the rated power. -
How do I know how long the product’s power lasts?
The LCD screen of this product displays the battery lifetime, which can be used to estimate the charging time required for general devices with stable power usage. -
How do I know that the product is charging?
When charging, the LCD screen will show the remaining charging time, and the power indicator circle outside the percentage of the battery capacity will start to rotate cyclically and indicate the input power.
Troubleshooting
| Details of Error Icons | Error Type | Recovery Methods |
|---|---|---|
| **** |
OVERLOAD
| ****
icon
| ****
flashes
| USB-A overload protection| Remove the abnormal load and normal operation
will resume automatically once the load is normal.
|
OVERLOAD
| ****
icon
| ****
flashes
| USB-C overload protection| Remove the abnormal load and normal operation
will resume automatically once the load is normal.
| | ****
icon
| ****
flashes
| USB-C high-temperature protection| Normal operation will resume automatically after the product cools down.
RECHARGING
| TIME| ****
icon
| ****
flashes
| Battery charging high-temperature protection| Normal operation will resume
automatically after the battery cools down.
| | ****
icon
| ****
flashes
| Battery discharge high-temperature protection| Normal operation will resume automatically after the battery cools down.
RECHARGING
| ****
TIME
| ****
icon
| ****
flashes
| Battery charging low- temperature protection| Normal operation will resume
automatically after the battery temperature is restored to above 5°C (41°F).
| ****
RECHARGING TIME
OVERLOAD
| ****
icon
| ****
flashes
| Charging overload protection| Normal operation will resume automatically
after being restarted.
50Hz
| ****
OVERLOAD
| ****
icon
| ****
flashes
| ****
AC output overload protection
| Normal operation will resume after removing the over-powered device and restarting the machine. Electrical appliances must be used within the rated power (for the power limit of
electrical appliances in the X-Boost mode, please refer to the X-Boost function introduction)
50Hz| | ****
icon
| ****
flashes
| ****
AC over-temperature protection
| Please confirm that the air inlet and outlet of the product are unobstructed. Normal operation will resume automatically
once the cause is eliminated and the temperature decreases.
| | ****
icon
| ****
flashes
| AC low-temperature protection| Normal operation will resume automatically
after the ambient temperature is restored.
50Hz| |
icon
| ****
flashes
| ****
Fan blocking
| Please check whether the fan is blocked by foreign objects and remove the
cause of the error.
|
OVERLOAD
| ****
icon
| ****
flashes
| Car charging overload protection| Normal operation will resume automatically
once the load is normal.
50Hz| | ****
icon
| ****
flashes
| Car charging high- temperature protection| Normal operation will resume
automatically after the product cools down.
50Hz| | ****
icon
| ****
flashes
| Failure of communi- cation between main control board and AC| Normal operation will resume automatically after being restarted.
What’s In the Box
Storage & Maintenance
- Ideally, use and store the product between 68°F to 86°F, and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 113°F or below 14°F for an extended period.
- Storing a battery with a low charge for a long period shortens its lifespan. RIVER mini mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is about 80% before putting RIVER mini into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 80%.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>