DELTACO GAMING GAM-150 RGB Gaming Table Instruction Manual

DELTACO GAMING GAM-150 RGB Gaming Table

Product Information

• Product Name: DT420(GAM-150) RGB Gaming Table
• Package Contents: A (x1), B (x1), C (x1), D (x1), E (x1), F (x1), G (x1), H (x1), I (x1), J (x4) ST3.5×20, K (x5) ST4.2×14, L (x4) ST4.2×12, M (x16) M6x16, N (x1), O (x1), P (x1), Q (x1), R (x4)
• Product Features : LED lights with adjustable brightness and color, remote control for customization, indoor use only, and a maximum weight limit
• Safety Instructions: Please read the entire instruction manual before installation and assembly. Ensure that all the components are present before installation. Do not exceed the maximum weight limit.

Product Usage Instructions

1. Assemble the table as specified in the assembly instructions provided.
2. Ensure that you have received all the components mentioned in the checklist provided.
3. Use the screws provided to assemble the table and do not over tighten them.
4. Connect the LED lights to the power source provided.
5. Use the remote control to customize the LED light settings by pressing the buttons as follows:
   • On/off: Press once to turn on/off the LED lights
   • Increase the LEDs’ speed: Press the button with a “+” sign to increase the speed of LED lights
   • Decrease the LEDs’ speed: Press the button with a “-” sign to decrease the speed of LED lights
   • Short press: Automatic mode. Press once to activate the automatic mode for LED lights
   • Press and hold 5 seconds: Static colour mode. Press and hold the button for 5 seconds to activate the static color mode for LED lights
   • Decrease or increase brightness: Press the button with a “+” or “-” sign to decrease or increase the brightness of LED lights
   • Lock or unlock the remote: Press the lock button to lock or unlock the remote control
   • Long press to change settings: Press and hold the button to change the settings. Press the “+” or “-” button to change the mode and R/G/B button to change the color
   • Static color: Press the static color button to activate static color mode for LED lights
6. This product is intended for indoor use only. Do not use it outdoors as it could lead to product failure and personal injury.
7. Ensure that the maximum weight limit is not exceeded while using the table.

SPARE PARTS

INSTALLATION

The feet must face outwards to avoid imbalance.

Remote control

Remote the plastic underneath, before using the remote control.
The remote control uses 1 x CR2025 battery, 3V

1. On/off
2. Increase the LEDs’ speed
3. Decrease the LEDs’ speed
4. Short press: Automatic mode. Press and hold 5 seconds: Static colour mode
5. Decrease or increase brightness
6. Lock or unlock the remote
7. Long press to change settings. Press +/- to change mode. Press R/G/B to change color.
8. Static color

Safety instructions

1. Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your retailer for assistance.
2. Caution : Usage together with products heavier than the rated max weight may result in instability which can cause possible personal injury or damage to the product.
3. Must be assembled as specified in assembly instructions. Improper installation may result in personal injury or damage to the product.
4. Safety gear and proper tools must be used.
5. Use the screws provided and do not over tighten the screws.
6. This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
7. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
8. Important : Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact Deltaco or the retailer where you purchased the product.
9. Caution : Do not exceed the marked max weight. Risk of personal injury or damage to the product!

Support

More product information can be found at www.deltaco.eu. Contact us by e-mail: help@deltaco.eu.

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of Conformity is available at the following internet address: www.aurdel.com/compliance/

Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.

www.deltacogaming.com
Made in China
DistIT Services AB, Suite 89, 95 Mortimer Street, London, W1W 7GB, England DistIT Services AB, Glasfibergatan 8, 125 45 Älvsjö, Sweden
help@deltaco.eu

References

• aurdel.com/compliance/
• deltaco.eu
• DELTACO GAMING | Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>