DELTACO GAMING WCH90 RGB Gaming Chair User Manual
- October 30, 2023
- DELTACO GAMING
Table of Contents
DELTACO GAMING WCH90 RGB Gaming Chair
Parts
Assemblay
Leistung
Verwenden Sie das mitgelieferte USB-Kabel ( ③ )
① Connect the flat DC power connectors.
② Connect the neck pillow’s buckle.
③ Connect the USB cable to a 5V power supply
- Optional: Power bank (not included) as a power supply for freedom from cables.
- Optional: Use a USB power adapter (not included) as stable power supply.
You can use other USB power supplies as well, such as a computer or laptop
Remote control
| = On/off button
---|---
| = “Auto”, activates rainbow LED mode
| = “Speed +”, increases LED speed
| =”Speed -”, decreases LED speed
| = increase LED intensity
| = decrease LED intensity
| =”Mode +”, next LED mode
| =”Mode -”, previous LED mode
| = Pair button, to connect remote control to chair
| = Settings button
| = “R”, activates red LED mode
| = “G”, activates green LED mode
| = “B”, activates blue LED mode
| = “B”, activates blue LED mode
| = “W”, activates white LED mode
| =”Y”, activates yellow LED mode
| =”C”, activates turquoise LED mode
| = “P”, activates purple LED mode
LED modes
To cycle through 166 LED modes press “Mode+” or “Mode-”.
To cycle through the other 166 LED modes press “Auto” and then “Mode+” or
“Mode-”.
Button combinations
Connect remote control: Press and hold the pair button for 5 seconds. LED will flash quickly in white, to confirm.
Disconnect remote control: Press and hold the pair button for 5 seconds. LED will flash slowly in white, to confirm.
Change color of the buttons “R”, “G” and “B” : Press and hold the settings button for 5 seconds. LED flashes once and changes to static white to confirm. Keep pressing “R” until the LED becomes red. This works for the buttons “R”, “G” and “B”. Press the settings button to confirm the color.
Change amount of LED lights: Press and hold the settings button for 5 seconds. LED flashes once and changes to static white to confirm. Press “Mode+” to increase amount of active LED lights.
Power usage
The power usage is strongly affected by the brightness level of the LED.
For example: The power usage is reduced to half as much when decreasing the
brightness level with 1 step from the highest setting
Power
Use with included USB cable③
Support
More product information can be found at
www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.
Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product. EST
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows: Hereby, DistIT Services AB declares that the radio
equipment type wireless device is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
www.aurdel.com/compliance/
Customer Support
www.deltacogaming.com / Made in China
DistIT Services AB, Suite 89, 95 Mortimer Street, London, W1W7GB, England
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>