FRESH N REBEL Twins 1 True Wireless In-ear Earbuds User Guide
- June 5, 2024
- FRESH N REBEL
Table of Contents
FRESH N REBEL Twins 1 True Wireless In-ear Earbuds
LET’S GET STARTED
Open the charging case and Take out the earbuds. They will automatically go into pairing mode. Select the Twins1 in your Bluetooth menu to connect to your device. Every next time you open the charging case, your Twins1 will automatically turn on and connect to your phone within seconds. When you put the earbuds back and close the charging case, they will automatically disconnect and turn off.
ATTENTION:
Before getting started, remove the safety covers from the earbuds and place
the earbuds back in the charging case.
TOUCH CONTROLS
LED BEHAVIOUR
Earbuds
- Blinking very slowly Connected
- Blinking Earbuds are reconnecting to each other
- Blinking very fast Searching for connection
Case (outside)
- Blinking very slowly Charging with cable
- Off Not charging
- On Fully charged
Case (inside)
- Battery indicator:
- 1 LED blinking Case needs to be charged
- 1 LED 0-25% Battery remaining in case
- 2 LEDs 25-50% Battery remaining in case
- 3 LEDs 50-75% Battery remaining in case
- 4 LEDs 75-100% Battery remaining in case
FEATURES
FAQ
What is Double Master?
- The Double Master functionality means that both earbuds have a built-in microphone, so you can use the earbuds individually (either the right or the left one) or both of them as a pair for stereo sound.
- Single Master means you can use only the right earbud individually or the right and left earbuds together. You can never use the left earbud separately from the right earbud.
I can’t seem to get touch control to work, what should I do?
- Aim for the LED and try touching with a bit more force.
My earbuds don’t turn off automatically when I put them back in the
charging case, what can I do?
- Is 1 LED blinking inside the charging case? Then the battery level of the case is too low to connect to the earbuds and automatically turns them off. Charge the case and the issue will be solved.
One of my earbuds doesn’t work anymore, what can I do?
- Put the earbuds back in the charging case, close the case and wait 10 seconds before trying again.
How do I solve my connection issues?
- Place the earbuds back inside the charging case and leave the lid open.
- Hold the reset button for 5 seconds until the outside LED is blinking 3 times. Your Twins1 will reset.
References
- Fresh 'n Rebel | On-trend mobile Must-Haves | 2 years warranty
- Fresh 'n Rebel | On-trend mobile Must-Haves | 2 years warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>