URBANGIZ AP01 Air Purifier Instructions

Table of Contents

URBANGIZ AP01 Air Purifier 1

Button “M” function: Press “M” button once, start the Auto Mode.Fan will switch to gear according to Air quality. Press “M” button twice, for manual mode 1 gear. Press “M button third time, shift manual mode to 2 gears.Press “M” button fourth time, shift manual mode to 3 gears.Press “M” button fifth time turn off the product.
Anion function: Long press “M” button once, start the anion, long press “M” button twice,turn it off.
Night Mode: Double press “M” button once, turn on the night light; Double press “M” button twice, turn it off
Type-C interface: The charge port can be charged as a power supply.
Power off switch: Place the outage switch shift to “ON” and connect the power source, place it to “OFF and turn the power source off. Notice Anion function can be working in any status as well as controlled turn on or off separately in any conditions.

Air quality light color: The air quality indicates “RED” , which means the air quality is very bad, the air quality indicates on “YELLOW” , means the air quality is poor,the air quality indicates on “Green means air quality is good.
Air quality indicator: during the product connected to a power source, after LED Panel gets initialized.air quality light indicates on Green, after warm-up 3 mins which the product transfers to indicator light color according to air quality.
Anion indicator: start the anion, light indicates on Green, flash,then turn it off, the light indicates on RED and put out.
Work instruction: When automatically mode direct to “AUTO” , fan indicates on 1-2-3 according to air quality changes. The button white background for breath light when manual mode direct to “MANU” ,fan 1 gear indicates on 1, fan 2 gears indicate on 2, fan indicates on 3rd(when it is under all manual mode on condition, the button white background for lasting light); when turning off the function,all indicator light put out.
Battery indicator: when charging, the battery is changing from 0-100%.100% is full battery.
Low battery: when the battery is under 10%, digital 10 flickers till power off. Reboot it to start the function, digital o flickers 10 times till power off. Notice: When working in all modes, the fan working display flashes and the negative ion display flashes.

Battery Using Time

Charging current: 1500mA ( 20% ) , full battery approx 7 hrs.
1st gear working 20 hrs,2nd gear working 10 hrs, 3rd working 7 hrs.
Please the first charge the product for more than 3 hours before use.
It is recommended to charge the product a time per 3months in case of battery damage and unserviceable.
When the product is not working for a long time, please make sure it can be storage under low humidity or room temperature in case of environmental factors to the product function damage.

Attentions

it is recommended to do a clean once in half month to the product, which replaced the filter per 3 months.
Prohibited wash filter with water. Please aim the hairdryer directly to the HEAP core inside blow more times,or with soft brush, toothbrush cleans up the dust which attached the filter net around.
Please DO NOT knock it purposely when you clean the filter core to ward off the filter core construction damages that cannot be filtering effect
The product is applied to 10-20 square meters.If room space exceeds this range please select the proper product.
The product working will come about slight ozone.please turn the product off and open the window and ventilate if you feel uncomfortable to the body. 6.Please DO NOT spray essence,essential oil,perfume etc.corrosive liquid to the filter.

Read User Manual Online (PDF format)