TRiSTAR VE-5804 Metal Stand Fan Instruction Manual

: June 5, 2024
: Tristar

Table of Contents

PARTS DESCRIPTION
SAFETY
PARTS DESCRIPTION
ASSEMBLY THE FAN
BEFORE THE FIRST USE
USE
CLEANING AND MAINTENANCE
ENVIRONMENT
Support
Documents / Resources

Instruction manual

VE-5804
VE-5805

PARTS DESCRIPTION

SAFETY

This appliance shall not be used by children aged less than 8 years. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children unless older than 8 and supervised.
By ignoring the safety instructions the manufacturer can not be held responsible for the damage.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Never move the appliance by pulling the cord and make sure the cord can not become entangled.
The appliance must be placed on a stable, level surface.
The user must not leave the device unattended while it is connected to the supply.
This appliance is only to be used for household purposes and only for the purpose, it is made for.
To protect yourself against an electric shock, do not immerse the cord, plug, or appliance in the water or any other liquid.

PARTS DESCRIPTION

Speed adjustment knob
Oscillation knob
Fan
Tripod

ASSEMBLY THE FAN

Use a screwdriver to secure the wooden leg to the tripod holder. Put the locking screw through the holes of the metal connector part and the stand holder and tighten the screw with the main nut. Each base leg has one screw and one main nut. (1)
Place the 3-piece metal link pipe in the center of the tripod and then secure it with the butterfly screws. (2)
Install the fan main body on the top of the standing pipe. (3)
Remove the 4 screws from the motor unit.
Fit the rear fan grill onto the motor unit. Make sure that the 4 holes on the motor match the 4 holes on the rear fan grill.
Fit the 4 screws and screw it on firmly.
Put the blade on the motor unit and carefully tighten the screw.
Fit the front fan grill onto the rear cage and fix them together using the metal clips. Tighten the small screw.

BEFORE THE FIRST USE

Take the appliance and accessories out of the box. Remove the stickers, protective foil, or plastic from the device.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around the device. This device is not suitable for installation in a cabinet or for outside use.
Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device matches the local voltage before connecting the device. Voltage 220V-240V ~ 50-60Hz).

USE

Set the speed adjustment knob to the desired position.
To make the fan head oscillate, push down the Oscillation Knob.
To stop the fan head from oscillating, pull up the Oscillation Knob.
The head of the fan can be adjusted up or down, to do this loosen the adjusting knob, adjust the fan to the desired angle, to securely and tighten the adjusting knob.

CLEANING AND MAINTENANCE

Clean the appliance with a damp cloth. Never use harsh and abrasive cleaners, scouring pads or steel wool, which damages the device.
Never immerse the electrical device in water or any other liquid. The device is not dishwasher-proof.

ENVIRONMENT

This appliance should not be put into the domestic garbage at the end of its durability but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual, and packaging put your attention to this important issue. The materials used in this appliance can be recycled. By
recycling used domestic appliances, you contribute an important push to the protection of our environment. Ask your local authorities for information regarding the point of recollection.