BAYSIDE Wireless Headphones Instruction Manual

June 5, 2024
BAYSIDE

Introduction

Thank you for purchasing Bayside wireless headphones
For best use of this device we recommend carefully reading this user manual and keeping it for your records

Package Contents

a. Bayside wireless headphones
b. Type C charging cable
C. Charging case
d. Instruction manual

a.                                   b.

c.                                   d.

Introduction

RIGHT EARBUD                      LEFT EARBUD

  1. DUST NET
  2. MULTIFUNCTION BUTTON
  3. MICROPHONE/LED
  4. CHARGING PORT
CHARGE CABLE
  1. USB TIP
+ iOS

To connect cell phone with the latest IOS version, follow steps 1-2:

  1. Turn on Bluetooth
    Open the Bluetooth menu on smartphone and enable detection Bluetooth devices

  2. Connect to Bluetooth
    Open the case, turn on the left and right ears at the same time the earphones on both sides are automatically paired keep the unlocked phone close and follow the instruction that appears on the screen

Use it with your other Apple devices

Bluetooth pro works with your other devices connected to iCloud.
Select bluetooth in the Control Center (IOS and ipadOS) or in the menu bar (macos)

    Press to turn on or stop
   Double tap to move forward
Triple tap to go back
       Say “Hey Siri” to activate the Siri or Google function

Press and Hold

Switch between active noise cancellation and transparency modes

Tips for changing hearing airds

To remove the tips, pull firmly
To place the tip, push until it clicks

FCC Information                                  FCC ID: 2A6Q9-00745

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV/technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE.

Warning:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not he co- located or conjunction with any other antenna or transmitter.

It may damage your hearing if you listen with high Volume for a long time.
It is recommended you use the lowest Volume possible for listening to music.

Device Safety
  • Your Bayside wireless headphones have internal rechargeable batteries. Improper usage may result in the Earbuds becoming hot, ignite or burst and cause injury if exposed to conditions of abuse.

  • Do not disassemble, throw away or damage Bayside wireless headphones.

  • Store BaySide Wireless headphones in a dry place, keeping them away from damp corrosive materials and environments such as salt air.

  • Keep BaySide wireless headphones away from direct sunlight, fire and high voltage equipment.
    Do not store Bayside wireless headphones inside a car during hot weather. Remember a dosed car acts as a green house allowing the inside to reach high temperatures.

  • Bayside wireless headphones are not a toy. Please keep them out of the reach of young children.

  • Please do not discard Bayside wireless headphones. Consult your local waste collection agency for proper disposal or recycling methods.
    You may also contact “Call2Recycle”
    at 877-273-2925 or online at
    call2recycle.org” for a battery
    recycling drop off location near you.

Charging the earbuds
  1. Plug the earbuds into the charging case, then press the button on charging case, the charging case indicator will be solid blue and the earbuds indicator will be solid red during charging.
  2. When the battery of earbuds is fully charged, the indicator of the charging case and earbuds. will turn off.
Charging the charging case
  1. Please plug the charger cable into the charging case.

  2. Connect the charger to a USB power source, the charging case indicator will flash red during charging. If charging does not start, disconnect the charger plug it in again, and retry.
    Charging the batteries fully may take hours.

  3. When the battery of the charging case is fully charged, the red indicator light will be solid. Disconnect the charger from the USB power source and the charging case.

Battery Information

Your earbuds are powered by a rechargeable batteries.
The full performance of new batteries is achieved only after two to three complete charge and discharge rides. The batteries can be charged and discharged hundreds of times.

  • Do not leave a fully charged earbuds connected to a charger, overcharging may shorten their lifetime. If left unused, fully charged earbud batteries will lose their charge over time.
  • Never use any charger that is damaged.
  • Leaving the device in hot or cold places will reduce the capacity and lifetime of the batteries. Optimal temperature for the batteries is between 59ºF and 77ºF. A device with a hot or cold batteries may not work temporarily, even when the batteries are fully charged.
  • Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged Always dispose of batteries according to local regulation. Please recycle. Do not dispose as household waste.

Bayside Wireless:
800-852-2135

Made in China

Introduction

Thank you for purchasing Bayside wireless headphones
For best use of this device we recommend carefully reading this user manual and keeping it for your records

Package Contents

a. Bayside wireless headphones
b. Type C charging cable
C. Charging case
d. Instruction manual

a.                                   b.

c.                                   d.

Introduction

RIGHT EARBUD                      LEFT EARBUD

  1. DUST NET
  2. MULTIFUNCTION BUTTON
  3. MICROPHONE/LED
  4. CHARGING PORT
CHARGE CABLE
  1. USB TIP
+ iOS

To connect cell phone with the latest IOS version, follow steps 1-2:

  1. Turn on Bluetooth
    Open the Bluetooth menu on smartphone and enable detection Bluetooth devices

  2. Connect to Bluetooth
    Open the case, turn on the left and right ears at the same time the earphones on both sides are automatically paired keep the unlocked phone close and follow the instruction that appears on the screen

Use it with your other Apple devices

Bluetooth pro works with your other devices connected to iCloud.
Select bluetooth in the Control Center (IOS and ipadOS) or in the menu bar (macos)

    Press to turn on or stop
   Double tap to move forward
Triple tap to go back
       Say “Hey Siri” to activate the Siri or Google function

Press and Hold

Switch between active noise cancellation
and transparency modes

Tips for changing hearing airds

To remove the tips, pull firmly
To place the tip, push until it clicks

FCC Information                                  FCC ID: 2A6Q9-00745

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV/technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE.

Warning:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not he co- located or conjunction with any other antenna or transmitter.

It may damage your hearing if you listen with high Volume for a long time.
It is recommended you use the lowest Volume possible for listening to music.

Device Safety
  • Your Bayside wireless headphones have internal rechargeable batteries. Improper usage may result in the Earbuds becoming hot, ignite or burst and cause injury if exposed to conditions of abuse.

  • Do not disassemble, throw away or damage Bayside wireless headphones.

  • Store BaySide Wireless headphones in a dry place, keeping them away from damp corrosive materials and environments such as salt air.

  • Keep BaySide wireless headphones away from direct sunlight, fire and high voltage equipment.
    Do not store Bayside wireless headphones inside a car during hot weather. Remember a dosed car acts as a green house allowing the inside to reach high temperatures.

  • Bayside wireless headphones are not a toy. Please keep them out of the reach of young children.

  • Please do not discard Bayside wireless headphones. Consult your local waste collection agency for proper disposal or recycling methods.
    You may also contact “Call2Recycle”
    at 877-273-2925 or online at
    call2recycle.org” for a battery
    recycling drop off location near you.

Charging the earbuds
  1. Plug the earbuds into the charging case, then press the button on charging case, the charging case indicator will be solid blue and the earbuds indicator will be solid red during charging.
  2. When the battery of earbuds is fully charged, the indicator of the charging case and earbuds. will turn off.
Charging the charging case
  1. Please plug the charger cable into the charging case.

  2. Connect the charger to a USB power source, the charging case indicator will flash red during charging. If charging does not start, disconnect the charger plug it in again, and retry.
    Charging the batteries fully may take hours.

  3. When the battery of the charging case is fully charged, the red indicator light will be solid. Disconnect the charger from the USB power source and the charging case.

Battery Information

Your earbuds are powered by a rechargeable batteries.
The full performance of new batteries is achieved only after two to three complete charge and discharge rides. The batteries can be charged and discharged hundreds of times.

  • Do not leave a fully charged earbuds connected to a charger, overcharging may shorten their lifetime. If left unused, fully charged earbud batteries will lose their charge over time.
  • Never use any charger that is damaged.
  • Leaving the device in hot or cold places will reduce the capacity and lifetime of the batteries. Optimal temperature for the batteries is between 59ºF and 77ºF. A device with a hot or cold batteries may not work temporarily, even when the batteries are fully charged.
  • Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged Always dispose of batteries according to local regulation. Please recycle. Do not dispose as household waste.

Bayside Wireless:
800-852-2135

Made in China

Documents / Resources

| BAYSIDE Wireless Headphones [pdf] Instruction Manual
00745, 2A6Q9-00745, 2A6Q900745, Wireless Headphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals