FROZEN32 FC75 Cooling Box User Manual

COOLING BOX
COOLFREEZE
FC75

Please read this manual carefully before starting the device. Keep it in a safe place for future reference. If the device is passed on to another person, this manual must be handed over to the user along with it.
The manufacturer cannot be held liable for damage resulting from improper usage or incorrect operation.

Explanation of symbols

DANGER!
Safety instruction: Failure to observe this instruction will cause fatal or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair the function of the product.
NOTE!
Supplementary information for operating the product.

Safety instructions

WARNING!

• Do not operate the cooling device if it is visibly damaged.

• If this cooling device’s power cable is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person in order to prevent safety hazards.

• If the power cord of the refrigerator is damaged, it must be replaced to prevent safety hazards

• This cooling device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.

• This cooling device can be used by children aged 8 years or over, as well as by persons with diminished physical, sensory or mental capacities or a lack of experience and/or
  knowledge, providing they are supervised or have been taught how to use the cooling device safely and are aware of the resulting risks.

• Cleaning and user maintenance must not be carried out by children without supervision.

• Children must be supervised to ensure that they do not play with the cooling device.

• Always keep and use the cooling device out of the reach of children under the age of 8 years.

• Do not store any explosive substances such as spray cans with a flammable propellant in the cooling device.

CAUTION!

• Before starting the refrigerator, make sure the power cord and plug are dry.

• Disconnect the cooling device from the power supply
  – before each cleaning and maintenance
  – after every use

• Food may only be stored in its original packaging or in suitable containers.

NOTICE!

• Check that the voltage specification on the type plate corresponds to that of the energy supply.

• Only connect the cooling device as follows:
  – With the DC connection cable to a DC power supply in the vehicle
  – Or with the AC connection cable to an AC power supply

• Never pull the plug out of the socket by the cable.

• If the refrigerator is connected to a DC outlet: Before connecting the fast charging device, disconnect the refrigerator and other power-consuming devices from the battery.

• If the cooling device is connected to a DC outlet: Disconnect the cooling device or switch it off when you turn off the engine. Otherwise, you may discharge the battery

• The cooling device is not suitable for transporting caustic materials or
  materials containing solvents.

• The insulation of the cooling device contains flammable cyclopentane and requires special disposal procedures. Deliver the cooling device at the end of its life-cycle to an appropriate recycling center.

• Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for the purpose ..

• Do not place the cooling device near naked flames or other heat sources (heaters, direct sunlight, gas ovens etc.)

• Ensure at all times that there is a minimum of 50 mm ventilation on all four sides of the cooling device.
  • Keep the ventilation area free of any objects that could restrict the airflow to the cooling components.
  • Do not place the cooling device in closed compartments or areas with no or minimal airflow.
  • Ensure that the ventilation openings are not covered.
  • Do not fill the inner container with ice or fluids.
  • Never immerse the cooling device in water.
  • Protect the cooling device and the cable against heat and moisture.

Scope of Delivery

Function Description

This is a portable cooler. A fast-acting and efficient cooling system provides maintenance-free cooling performance with thick insulation, a powerful compressor, and a control module and the cooler can withstand a heel (inclination) of 30° within a short period of time.
(Note: During working, if the inclination exceeds 15°, the compressor noise will increase accordingly.)

4.1 Scope of functions

• Power supply with AC adapter for connecting to the AC mains
• Three-level battery monitor to protect the vehicle battery
• Display with the temperature gauge in °C and °F
• Temperature setting: With two buttons in steps of 1°C (2 °F)
• Bluetooth App Control
• Foldable carrying handles
• USB port for power supply, such as mobile phones.
• Removable basket.

4.2 Operating and display elements

seconds
2| Display| Press the button to switch the cooler on
DC: DC connection is on
H/M/L: Battery voltage protection gear
°C/°F: Temperature unit symbol
: Left compartment cooling operation
: Right compartment cooling operation
: The compressor is on
: Bluetooth is on
MAX: Maximum cooling mode
ECO: Energy-saving cooling mode
3| | Press the”+” button to increase the temperature gauge or function selection.
Press the”-” button to decrease the temperature gauge or function selection.
Press the”-” and “+” buttons at the same time for 3 seconds to set temperature compensation.
4| | Press” “to select the function or save the setting memory

Display panel:

1. USB output port DC5V2A
2. 0n/Off button
3. Button
4. LCD screen display
5. Down “-” button
6. Up”+” button
7. DC voltage detection
8. ABS battery voltage protection gear setting
9. Temperature gauge display
10. C/F Celsius or Fahrenheit display
11. Left/right compartment operation display
12. Compressor operation instructions
13. MAX/ECO function mode switching
14. Bluetooth function display

Button settings:
A. ON/OFF switch button, short press 1s, then release the button, the device is ON; long press 3s, then release the button, the device is OFF.
ON: The LCD display lights up and the device starts cooling.
OFF: The LCD display lights out and the device stops working.
B. Setting button, short press for 1s, then release the button to select and set the temperature, enable the Bluetooth function; long press for 3s, then release the button to select and determine the battery voltage range (H/M/L range), Temperature unit (°C/°F), MAX/ECO mode switching.

1. Temperature setting: Short press the Setting button for 1s, then release the button, the left compartment temperature figure starts to flash, press”-” and”+” to set the parameters; Then short press the Setting button for 1s, release the button, the right compartment temperature figure starts to flash, press”-“”+” to set the parameters, and then short press the Setting button for 1s or stop pressing the button for more than 10s to complete the setting.
2. Bluetooth activation: short press the Setting button for 1s, then release the button, within 5s, the Bluetooth icon will appear automatically, and you can connect to the  Bluetooth operation.
3. Battery voltage range H/M/L setting: long-press the Setting button for 3s, then release the button, the H/M/L letters begin to flash, and then short press the Setting button for 1s to switch between H/M/L Voltage gear.
4. Celsius or Fahrenheit display switching: Press and hold the Setting button for 3s, then release the button, the C/F start to flash, and then short press”-” to switch the C/F temperature unit.
5. Cooling mode switching: Long press the Setting button for 3s, then release the button, MAX/ECO will start flashing, and then short press “+” to switch the MAX/ECO cooling mode.

C. +/UP button, set parameter +1 or function selection switching.
D.-/Down button, set parameter -1 or function selection switching.
E. The left/right compartment closes the operation function: long press the setting button for 3s, release the button, the icons representing the left and right compartments flashing at the same time, indicating the dual-chamber refrigeration mode; short press the switch button for 1s then release. Press the button to switch to display the icon, which means that the left compartment is running alone (after a delay of 5 minutes, the right compartment displays the symbol); shortly press the switch button for 1 second, and release the button to switch to display the “C?” icon. Indicates that the right compartment is operating alone (after a delay of 5 minutes, the left compartment will display the “nc” symbol); Shortly press the switch button for 1 second, and release the button. The icons representing the left and right compartment flash at the same time, indicating dual-zone cooling. After setting the left/right/dual compartment operation, the setting will take effect 10 seconds after the button is stopped.

Operation

5.1 Before initial use
NOTE
Before starting your new cooler for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter “Cleaning and
maintenance”).

5.2 Energy saving tips

• Choose a well-ventilated location that is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.

5.3 Connecting the cooler
NOTICE! The danger of damage!
Disconnect the cooler and other consumer units from the battery before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
Connecting to AC mains (e.g. in the home or office)

DANGER! Danger of electrocution!

• Never handle plugs and switches with wet hands or if you are standing on a wet surface.
• If you are operating your cooler on board a boat with an AC mains connection, you must install a residual current circuit breaker between the AC mains and the cooler. Seek advice from a trained technician.

5.4 Using the cooler
NOTICE! The danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that is generated during operation can dissipate. Ensure that the ventilation slots are not covered. Make sure
that the device is sufficiently far away from walls and other objects so that the air can circulate.
NOTE
When operating with the battery, the display switches off automatically if the battery voltage is low.

5.5 Setting the temperature
NOTE!
The temperature of each compartment can be set to -22 °C. The manufacturer however recommends a cooling temperature of -15 °C to -18 °C for normal usage and optimum energy consumption.
NOTE!
Be sure to set the temperature as you expect for the item that needs to be refrigerated to avoid too low a temperature on the itemTo damage.

5.6 Using the battery monitor
The device is equipped with a multi-level battery monitor that protects your vehicle battery against excessive discharging when the device is connected to the onboard DC  supply.
If the cooler is operated when the vehicle ignition is switched off, the cooker switches off automatically as soon as the supply voltage falls below a set level. The cooler will switch back on once the battery has been recharged to the restart voltage level.

NOTICE! The danger of damage!
When the battery connected to the product is low in power, the product will stop working due to the battery protection function. In order to avoid frequent start-up and shutdown of the product, please charge the battery in time. Avoid starting repeatedly or operating current consumers without longer charging phases. Ensure that the battery is
recharged.
NOTE
When the cooler is supplied by the starter battery, select the battery monitor mode “HIGH”. If the cooler is connected to a supply battery, the battery monitor mode “LOW” will suffice.

NOTICE! The danger of damage!
When the battery connected to the product is low in power, the product will stop working due to the battery protection function. In order to avoid frequent start-up and shutdown of the product, please charge the battery in time. Avoid starting repeatedly or operating current consumers without longer charging phases. Ensure that the battery is recharged.
NOTE
When the cooler is supplied by the starter battery, select the battery monitor mode “HIGH”. If the cooler is connected to a supply battery, the battery monitor mode “LOW” will suffice.

5.7 Open or close the large/small compartment (FC-75)
You can set the large room/small compartment to work alone or at the same time cool.
5.8 Downloading Bluetooth APP
The cooler can be controlled via Bluetooth using an APP that you can install on a compatible device, to monitor and control products within a certain distance. (at 4.2 Button Setting B 2)
5.9 Setting the Bluetooth and connecting to the Car Refrigerator APP

NOTE
The pairing must be done in the Car Refrigerator APP, not in the device settings. A Bluetooth connection does not require a password.

5.10 USB port for power supply
The USB port allows you to charge small devices like mobile phones and mp3-players.
NOTE
Ensure that any small device connected to the USB port is compatible with 5 V/2000mA operation.

5.11 Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the evaporators.
WARNING!
This reduces the cooling capacity. Defrost the device in good time to avoid this.

To defrost the cooler, proceed as follows:

• Take out the contents of the cooling device.
• If necessary, place them in another cooling device to keep them cool.
• Switch off the device.
•  Leave the lids open.
• Wipe off the defrosted water.

5.12 Replace DC fuse
Update the replacement process:

• Remove the refrigerator net cover with a screwdriver
•  Locate the DC fuse holder and pry open the fuse holder
• Pull out the faulty blade fuse
• Insert a new fuse with the same type and parameters
• Restore the fuse holder and refrigerator net cover

5.13 Replacing the fuse of the DC plug

• Replace the faulty fuse with a new fuse of the same model and rating.

5.14 Defrosting the cooler

NOTICE! The danger of damage!
The light PCB can only be replaced by the manufacturer, authorized repair center, or similarly qualified technician to avoid danger.

Cleaning and maintenance

NOTICE! Risk of damage

• Never clean the cooler under running water or in dishwater.
• Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooler. Occasionally clean the device’s interior and exterior with a damp cloth.
  Make sure that the air inlet and outlet vents on the device are free of any dust and dirt,so that heat can be released and the device is not damaged.

Troubleshooting

This device does not function (DC Mode,
the ignition is on)| No voltage was detected in the DC
power outlet| In most vehicles, the ignition must be turned on before power will be supplied to the DC power outlet.
The DC socket is dirty, resulting in
poor electrical contact.| If the plug of this product becomes very hot on the
DC socket of the vehicle, try to clean the DC socket
or check if the plug is assembled correctly.
The fuse of the DC power cord plug
has blown.| Replace the device fuse
The car’s fuse has blown.| Replace the vehicle’s DC socket fuse. Please refer to
your vehicle operating manual.
This device does not function (AC mode),
only use the power  adapter to convert
DC voltage| No voltage is detected in the AC power outlet.| Try to use another socket.
Internal failure of this product.| It can only be repaired by an authorized repair center.
Don’t use the application (APP)| Bluetooth is not connected.| Connect to Bluetooth, see the chapter “Set up
Bluetooth signal and connect to the app”
The display shows reminder messages or warning codes.| –| See the table below.

Remind Message

Close the cover
| | Others| Inspection by the authorized repair center
F2 reminder- low voltage| Due to the low DC voltage,
the equipment has stopped working| Insufficient power supply voltage| Check the voltage drop from the
supply to the outlet of this
product, and increase the voltage if
necessary.
| | The battery voltage is too low| Test the battery and charge as needed
| | The battery protection the function is set too high| Choose a lower battery protection gear
| Because the DC voltage is too high (greater than 31.5V), the device is protected against power failure.| DC power supply voltage
parameters do not match| Ensure that the power supply voltage parameters match the equipment.
| Abnormal power supply| Check the DC power supply, repair or replace the power supply if necessary
| | others| Authorized maintenance
center inspection

Remind Message

Warning code| malfunction| Possible cause| Suggested remedy
---|---|---|---
F2| Fan over current| Internal fault| Turn off the device for at least 5 minutes, then restart it. If the problem persists, you need to authorize a repair center to inspect it.
F2| Compressor start failure| |
F2| The compressorspeed is low| The ambient temperature is
too high| Turn off the device for at least 30 minutes, or move to a colder location, and then restart.
F2| Controller over temperature| |
| | Blocked vents or insufficient clearance around| Clear the vents and leave enough clearance with the surroundings
| | Internal fault| Authorized repair center inspection
Fl| NTC open| Internal fault| Need to be inspected by an authorized repair center
Fl| NTC short circuit| |
Fl| Switch error| | Turn off the device for at least 1 minute, and then restart it. If the problem persists, you need to
authorize a repair center to inspect it.
Fl| Communication error|

Guarantee

The statutory warranty period applies. If the product is defective, please contact the manufacturer’s branch in your country (see the back of the instruction manual for the addresses) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device:

• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault

Disposal

• Place the packaging material in the appropriate recycling waste bins wherever possible.

If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
WARNING! Risk of Children’s playing Before disposing of the old product:

• Remove the cover
• Put the basket inside the cooler to prevent children from climbing.

Technical data

WARNING!
If the (FC-75) ambient temperature is above 43 °C (109 °F), the temperature gauge cannot be down to the lowest value – 22°C.

Test/certificates:

M-on/off( 12.2±0.3/11.4±0.3)
1-1-on-off( 12.6±0.3111.8±0.3)
DC24V Cut on/Cut off Voltage| L-on/off( 23.0±0.3/21.5±0.3)
---|---
M-on/off( 25.3±0.3/24.1 ±0.3)
H-on/off( 26.2±0.3/24.6±0.3)
Bluetooth Response Time| Less than 5 seconds
Bluetooth Response Distance| Within 15 meters

The refrigerant of this product is R 134a
Restriction of Hazardous Substances Directive (RoHS)
In order to meet the laws, regulations, and other requirements related to the restriction of hazardous substances in electrical and electronic products of the People’s Republic of China.
Our company classifies hazardous substances in this product according to parts, and declares as follows:

Box The name and content of hazardous substances in the product

Parts| Harmful Substance
(Pb)| (Hg)| (Cd)| (Cr(VI)| (PBB)| (PBDE)
Box and its components| 0| 0| 0| 0| 0| 0
Door body and its components| 0| 0| 0| 0| 0| 0
Insulation Materials| 0| 0| 0| 0| 0| 0
Compressor| 0| 0| 0| 0| 0| 0
Compressor controller| X| 0| 0| 0| 0| 0
Refrigeration components| 0| 0| 0| 0| 0| 0
Refrigerant| 0| 0| 0| 0| 0| 0
Electrical components| 0| 0| 0| 0| 0| 0
Power cord and connection line| 0| 0| 0| 0| 0| 0
Packaging and printing materials| 0| 0| 0| 0| 0| 0

This table is compiled in accordance with the regulations of SJ/T11364.
0: Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T26572.
X: Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement of GB/T26572.
*All parts and their homogeneous materials that contain hazardous substances in the detailed list cannot be replaced by hazardous substances due to the limitation of the industry’s technological development level. They comply with the strict requirements of the EU Ro HS for the restriction of hazardous substances.
Please feel free to use them.
Reminder: In order to protect the environment, after this product or its components are scrapped, as the consumer has the responsibility to separate it from domestic waste and
send it to a qualified recycling site, which will be classified and disassembled in accordance with relevant national regulations of recycling, etc.
For detailed information about the recycling of this product, please consult your local government, waste disposal agency, etc.

Electronic and electrical products sold within the territory of the People’s Republic of China must be marked with this mark, and the number in the mark represents the environmental protection use period of the product under normal use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>