thomann EBS Stanley Clarke Preamp User Manual
- June 6, 2024
- Thomann
Table of Contents
EBS STANLEY CLARKE
SIGNATURE ACOUSTIC PREAMP
USERS MANUAL
CHANNEL CONTROLS, SWITCHES & OUTPUTS
TECHNICAL SPECIFICATIONS
Channel Specifications:
Input Impedance:| 10 Mohms // 22 pF
Gain:| Gain Range| -oo/+30 dB
Gain Peak LED (ch A = RED, B = yellow)| +10 dBv
Frequency Response| +0/-3 dB 20-20.000 Hz
Bass Filter:| Type| Shelving
Gain Range| +/- 15 dB @ 40 Hz
Mid Filter:| Type| Bandpass Filter
Gain Range| +/- 13 dB
Frequency Range| 70 – 2500 Hz
Q| 0.8
Treble Filter:| Type| Shelving
Gain Range| +/- 15 dB @ 10 kHz
HP Filter:| Type| 12 dB/octave High Pass
Frequency Range| 20(off) – 450 Hz
Notch Filter:| Type| Bandpass Notch
Frequency Range| 70 – 2200 Hz
Q| 7
Attenuation| 7 dB (typically)
Electret Power (Channel A):| 5V, 2mA
Common Features:
Effects Loop:| Loop Signal Level| -10 dBv (nominal)
Gain| Unit y (1:1)
Output Impedance| 2 kohms
Input Impedance| 100 kohms
Modes| Serial or Parallel
Phones Out:| Recommended Imp.| 32 – 200 ohms
Aux Input:| Input Impedance| 20 kohms
Nominal Level| -10 dBv
Output:| Output Impedance Signal Level| <1 kohms
Signal Level| 0 dBv (nominal)
Balanced Output:| Output Level| -20dBv (nominal)
XLR Connections| 1-GND, 2-Hot, 3-Cold
Options| Gnd Lift, SPKR Sim
Balanced Input (Channel B):| Input Level| -30dBv (nominal)
XLR Connections| 1-GND, 2-Hot, 3-Cold
48V Phantom| Yes
Auxiliary Info:
Power Requirements| Idle| 500mA @9V
max| 800mA @9V (with headphones at max output level)
Dimensions (WxDxH):| max| 168 x 124 x 53 mm / 6.6” x 4.9” x 2.1”
Weight:| 660 g| (1.5 lbs.)
Specifications are subject to change without notice.
FOR MORE PEDALS, AMPS & ACCESSORIES, SCAN THE QR-CODE TO VISIT
www.ebssweden.com
BLOCK DIAGRAM – STANLEY CLARKE ACOUSTIC SIGNATURE PREAMP
