UiiSii Miss Bean Neckband Bluetooth Earphone User Guide

UiiSii Miss Bean Neckband Bluetooth Earphone User Guide

User Guide

Thank you for choosing Miss Bean “Neckband Bluetooth Earphone” , To better use this product, please read the Quick Start Guide carefully before use and properly manage it.

Product Specifications

• Bluetooth version : 5.0
• Necked line : 305mm±5cm
• Battery Capacity : Li-Polymer Battery 3.7V/160mAh
• Standby time : About 480h
• Music play time/Talk time : About 12h
• Charging time : About 2.5h
• Speaker size : 6mm
• Frequency range : 20~20000Hz
• Sensitivity : 100±3dB
• Cable length : 230mm±5cm
• Transmission range : 10mm Impedance : 16

Product Information

Neckband Bluetooth Earphone

1. Bullet silicone tips
2. Front and back the metal cavity
3. Volume down/Next track
4. LED (Red light /Blue light)
5. Turn on/Turn off/Answer /End call/Reject call/Play/Pause
6. Volume up/Previous track
7. The USB connector
8. Necked line
9. TPE cable

How to connect

1. In off mode, long press the center button for 5 seconds to get the headphone into pairing status with an English voice prompt `Pairing’. During the pairing process, the red and blue lights flash by turns. Successfully paired: The headphone will automatically shut down if pairing fails within 5 minutes.
2. Turn on the Bluetooth on your mobile phone, then search the Bluetooth device.
3. Choose the Bluetooth device of Miss Bean’ displayed on the phone and enter the pairing password0000′ to create Bluetooth connectivity with an English voice prompt `Connected’. The red and blue lights flash twice every 4 seconds in connected status.

How to use

Turn on : In power off mode, press and hold the middle button for 2 seconds, and there will be an English voice prompt of power on’ . The Red and blue LEDs will flash for 1 second. Turn off : In any mode, press and hold the middle button for 3 seconds, and there will be an English voice prompt ofpower off’ . The red and blue LEDs will flash for 1 second.
Volume up/down : Short press the sound volume +/- , and there will be an English voice prompt of `tone’ when the sound volume reaches its maximum or minimum.
Answer/End call : Short press the center button once in ring/call status.
Reject call : Press and hold the middle button for 2 second in the call ring status .
Play : Short press the center button once in standby mode.
Pause : Short press the center button once in playing music mode.
Previous/Next : In playing music, press and hold volume -/+ for 2 second.
Clear paired list : Long press the plus and reduce buttons of sound volume for 5 seconds at the same time, the red and blue lights flash for three times simultaneously.

How to charge

Use the included Micro USB cable to plug in the charging port to charge. Low battery (remaining talk time is less than 10 minutes): the voltage starts below 3.3V and prompts once every minute. Automatic shutdown below 3.1V. Charging: The red light is on when charging is in progress (the software is reset when the charging cable is plugged in and cannot be turned on). Fully charged: The blue light is on after the charging is completed.

Important safety information

• Don’t remove or replace the Battery, including sensitive electronic components, including a battery, and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid. Don’t use damaged batteries and electronic components.
• Despoil and recycling information Don’t treat the product and battery as a household waste or into a fire. When you decide to dispose of the product and its battery, please follow the local environmental laws to handle the battery to avoid an explosion.
• Medical device interference The product contains components and radios that emit electromagnetic fields and also contains magnets. These electromagnetic fields and magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
• Listen Responsibly To avoid hearing impairment, please make sure to turn down the volume of the music player before connecting the earphones. After putting the earphones into/onto the ears, turn up the volume gradually until to a comfortable listening level. Noise level is measured in decibels (db). Exposure to 85db or higher noise will lead to gradual hearing impairment. Please supervise your usage and the hearing impairment is a function of loudness against time. The louder the sound is, the shorter you can be exposed. The softer the sound is, the longer you can listen.

Caution:
Use the Bluetooth Earphone in the environment with the temperature between -10¥ and 40¥. · The product shall only be connected to a USB interface of version USB2.0 or higher and that the connection to a power USB is prohibited.

For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>