XOPPOX Graphics Drawing Tablet: User Guide & Setup Instructions
- June 5, 2024
- XOPPOX
Table of Contents
The XOPPOX Graphics Drawing Tablet is an innovative device that allows users to input handwriting and pressure induction, making it suitable for online teaching and drawing software. The digital pen controls the thickness and thinness of the handwriting strokes, simulating the strokes of pencils, markers, watercolors, brushes, and oil brushes. The graphics tablet is also compatible with mobile phone or PC tablet drawing software. This user guide provides comprehensive instructions on how to set up and use the XOPPOX Graphics Drawing Tablet. Windows users can enjoy driver-free online teaching, while Mac users can download the driver through a link provided in the guide. The guide also provides detailed information on how to connect the graphics tablet to the computer, customize the function of shortcut keys, adjust the pressure sensitivity between the pen and tablet, and calibrate the device if needed. Additionally, the guide offers a quick guide for using the tablet with mobile phones or PC tablets without installing drivers. Overall, this user guide is an essential tool for anyone who wants to maximize their experience with the XOPPOX Graphics Drawing Tablet.
XOPPOX 34046511 Graphics Drawing Tablet
Product Function
This product has the function of handwriting input and pressure induction, with teaching software, it can be applicable to online teaching; It is also applicable to drawing software. The handwriting will change in thickness or thickness with the control of the pressure applied by the digital pen. It simulates the strokes of pencils, markers, watercolors, brushes and oil brushes .Also applicable to mobile phone or PC tablet drawing software.
Windows Driver-free Online Teaching
System requirement： Windows 10 and part of Windows 7
Use Mode： No need to install the Graphics Tablet Driver.
When connect the USB data cable to the computer, and the green indicator blinks. Please wait unti l the green indicator i s always on, then the graphics tablet can be used normally. For example, support Microsoft Office PowerPoint full screen play Ctrl+P (Pen), Ctrl+E (Eraser), Ctrl+L (Digital Laser) and page up and down function. PowerPoint full screen play and Digital laser only supports PowerPoint 2013 and above.
Graphics Tablet Driver Quick Guide
-
How to download and install the Driver
System requirement：Windows 7 or above / Mac OS 10 or above
Download the driver of graphics tablet through the link below: http://download.myvsoncloud.com -
Windows installation:
-
Please make sure that there is no other brand graphics tablet driver in the computer.
If you have installed other graphics tablet on the computer, you must first uninstall the driver, restart the computer, and then install the driver of the graphics tablet, otherwise there will be conflicts. -
Close all painting software and anti-virus software before installation.
-
Double-click to run the driver, and click next step in turn according to the prompt.
* **a.** Click “Next”
* **b.** Click “Next”
* **c.** Click “Next”
* **d.** Click “Finish”
4. Restart the computer after the driver installed.
2. Mac installation:
1. Double-click to run the driver in your download file, and click next step in turn according to the prompt. Then Go -Applications here is Graphics Tablet Driver.
* **a.** Click “Continue”
* **b.** Click “Continue”
* **c.** Click “Install”
* **d.** Enter your Password, and then click the “Install Software”
* **e.** Click “Close”
2. Please check the System Preferences – Security & Privacy – Privacy-Screen Recording/Input Monitoring/Accessibility and allow Graphics Tablet to control your computer.
* Just install the driver with the guidance of default prompt. Don’t change any settings, or there will be something wrong in running.
* During the process of installation, it may be blocked by the firewall for a few times. Please choose “install this program software” to continue.- How to connect
- Connect the USB data cable to the computer.
- When t he green indicator blink s , please wait until the green indicator is always on , the icon in taskbar becomes colorful from gray after the computer recognizes the tablet device.
- Finally the driver interface displays ‘The graphics tablet is connected’. Then the graphics tablet can be used normally. Note：
* Be sure to connect the graphics tablet to the computer after the driver is installed, so as to avoid driver installation delays or errors during the identification of the hardware.
* If it is a desktop computer that you are using, the graphics tablet cable port should be plugged into the USB port on the back of the case, instead of the USB port on the front of the case.
* If the device does not respond, please try to unplug the USB cable again and reconnect the device.-
Settings in Windows
The operation procedure in Mac is similar to that in Windows. -
Work Area Settings
* Work area is the effective working area of handwriting on the tablet which corresponds to the mouse cursor working area on the monitor of computer.
* If there are more than one monitors, it will can reflect on each monitor in mirror mode.
* You need select the monitor you want to display with tablet in extend mode.
* **Display Ratio:** It means the effective handwriting area on the tablet is in same ratio with the monitor. But some area on the tablet may out of work. If you draw a circle in working area, it will display a circle on the monitor.
* **Full Area:** It means total work area on the tablet can work. But if the ratios are different between monitor and tablet, it may display a oval when you draw a circle on the tablet.
* **Rotate Set :** You can set the way to place the tablet according to your personal habit.
2. **Press Keys Settings**
* **Default Hot-keys:** Windows and Mac default hot-keys are different, as shown in the figure below. Press the button on the tablet and the computer displays the shortcut value. You can also view the default hot-keys of the hardware key by placing the cursor on the key or clicking the key icon.
3. Customize the function of shortcut keys
* Click one key to enter the “Hot-keys” window as below. Set its function or select one as you want. Then click “Ok” to save the setting. eg: Ctrl+P is Pen function in PowerPoint full screen play. If need to set “Win+” to “Ctrl+P”, please follow the below step.
* **a.** Click “Win+” and enter the hot-key setting interface, it defaults Win
* **b.** Select “Ctrl” and input the letter “P”, and then click “OK”
* **c.** Then click “OK” or “Apply” to take effect the hot-keys.
* **Switch:** It can help you to switch frame among multiple monitors.
* **Shell:** Add a application program in it. You can run the application quickly by pressing the shortcut key.- Pen Settings
- The default functions are letter”E” and the right button of mouse. You can customize their function.
- Under pen mode, The mouse cursor’s location on the screen is the position of the pen. It will move with the pen moving on the working area on the tablet. This is the default setting.
- Under mouse mode, the pen can be used as the mouse.
- Tip Feel: Adjust the pressure sensitive between the pen and tablet.
- Current Pressure: Test the pen pressure value.
- Pressure Distance: Adjust the sensitive distance between the pen and tablet. It’s easier to double click with wide distance.
- Start Windows Ink: This function is used with drawing or office software. Such as Adobe Photoshop, Sketchbook, Microsoft Office, etc.
- About
- Import/Export: You can import or export your settings. Convenient for you to set the product with different software.
- Default setting: Back to the original settings.
Phone/PC Tablet Quick Guide
System requirement: Android 6.0 or above
Use Method：
- Tablet can be used with mobile phone or PC tablet without installing driver.
- Please use the portrait screen for mobile phones/PC tablet , and place the Graphics tablet horizontally.
- Some models need to go to the Settings of mobile phone/PC tablet — turn on the OTG function
- Please select the appropriate OTG adapter according to the type of interface of your phone. Connect one end of the OTG to the USB cable, and insert the other end into the phone interface. The left half of the Graphics tablet will automatically correspond to the proportion of the phone.
Manual Setting of Tablet
Please be sure to turn off the graphics tablet driver before setting the computer and mobile phone screen scale mode manually.
The default is the automatic mode, automatically identify the phone or PC
(phone 8:16, PC 16:9); only the screen scale is not correct, iPhone mode,
recognition errors need to be manually set.
Drawing software in computer or mobile tablet, the display screen is
proportional to the map area of tablet, and drawing a circle on the tablet
will create a circle on the screen, drawing a circle on the tablet may create
an ellipse on the screen if the scale is not equal, so the user manually sets
the scale mode according to the actual size of the screen.
Note: Manual Settings only for driver-free scenarios (no Graphics Tablet
Driver installed). After connecting to Graphics Tablet Driver, manual setting
modes such as mobile phone and computer will not take effect, and the screen
proportion will be set by the driver software.
Pen
Hold the pen
Hold the l pen the way you would normally hold it, then rotate the pen to
adjust the position of your finger until your thumb or forefinger can easily
press the pen shortcut.Be careful not to miss the button when using the pen.
Note: When not in use, please put the pen on the desk, do not put the pen
on the tablet, otherwise it will interfere with the use of the mouse and other
devices, may also cause your computer can not enter the sleep mode.
Pointer Movement
In the effective working area of the tablet, the mouse cursor can be moved to
any position on the corresponding screen directly by the movement of the
pen.If beyond the working area, invalid.
The tip double-click
Double-clicking the pen on the working area of the tablet is equivalent to
double-clicking the left mouse button. After you touch the pen for the first
time, please do it again as soon as possible in the shortest time.
Drag
Do not release the icon or file when the nib selects it. Swipe the nib on the
screen to move the icon or file to a specified location.
Replace the pen refill
Calibration Guide
Under normal circumstances, the user no need to calibrate, directly for use.Only if the pen is not working or is not in normal use, follow the method for calibration.
- When the Graphics tablet is connected to PC, then hold the middle three buttons on the table at the same time until the green indicator get dark. Loosen the button, the pen entering calibration status;
- Let the pen free falling on the screen surface and hold the pen in the hollow of hand to keep it moti onless for about 4~5 seconds (do not press the pen nib with extra force)
- If the green light lights on, it means the calibration is successful;
- If the green light flash 3 times, it means the calibration fails, please follow steps 1.2and calibrate again.
Parameters
- Tablet Dimension： 297.4190.011.8mm
- Pen Dimension： 142.0*14.0mm
- Work Area： 210*140mm
- Touch Technology： Passive electromagnetic induction Sensor Height：10mm
- Data interface： Micro USB
- Pressure Level： 8192Levels
- Reading resolution： 5080LPI
SPECIFICATION
| Product Name | XOPPOX 34046511 Graphics Drawing Tablet |
|---|---|
| Product Function | Handwriting input and pressure induction |
| Compatibility | Online teaching and drawing software, mobile phone or PC tablet |
drawing software
Windows Driver-free Online Teaching| System requirement: Windows 10 and part
of Windows 7
Graphics Tablet Driver Quick Guide| System requirement: Windows 7 or above /
Mac OS 10 or above
Connection| USB data cable to the computer
Settings| Work area, press keys, pen settings
Phone/PC Tablet Quick Guide| System requirement: Android 6.0 or above
Manual Setting of Tablet| For driver-free scenarios only
Pen| Hold the pen, pointer movement, replace the pen refill
Calibration Guide| Instructions provided in the user guide
FAQS
Abnormal
Occurrence
| Solution
---|---
The tablet doesn’t work
| 1) Make sure the tablet is powered;
-
Make sure the driver is installed correctly; otherwise, please reinstall the driver.
-
Reconnect the USB cable or replace the USB interface.
The pen doesn’t| 1) Make sure that the pen you are using is compatible with the product. If
work
| not, please follow the pen calibration method before using.
- Make sure the driver is installed correctly.
---|---
Keyboard shortcuts don’t
work
| 1) Make sure the shortcut function is enabled in the driver, and click ok or apply.
2)Ensure the correct definition of key functions.
No pressure in the drawing software
| It is possible that you have another brand of digital board driver on your computer, or that you have the drawing software open during installation, and the files are not installed correctly into the system directory.
Please uninstall other brands of digital board driver and close the drawing software, and then re-install the driver. After the driver is installed, open
the drawing software for use.
Can’t the
computer go into sleep mode
| ****
Please do not place the pen on the surface of the tablet out of use. This will keep the tablet awake.
The pen keys are not working
| When pressing the pen button, please make sure that if the pen tip touch
the tablet surface, and the distance between the pen tip and the tablet surface is within 10mm.
Why Photoshop CS6 is not
available in Win10
| ****
-
Uncheck Windows Ink in the driver and restart PS CS6 software.
-
The version above PS CS2018 is recommended.
How do you calibrate the XOPPOX Graphics Drawing Tablet?
The calibration guide is not provided in this user guide.
How do you manually set the tablet on the XOPPOX Graphics Drawing Tablet?
Please be sure to turn off the graphics tablet driver before setting the computer and mobile phone screen scale mode manually. The user manually sets the scale mode according to the actual size of the screen.
How do you use the XOPPOX Graphics Drawing Tablet with mobile phones or PC
tablets without installing drivers?
Connect one end of the OTG to the USB cable, and insert the other end into the phone interface. The left half of the Graphics tablet will automatically correspond to the proportion of the phone.
How do you adjust the pressure sensitivity between the pen and tablet on
the XOPPOX Graphics Drawing Tablet?
Use the Tip Feel option to adjust the pressure sensitivity between the pen and tablet.
How do you customize the function of shortcut keys on the XOPPOX Graphics
Drawing Tablet?
Click one key to enter the “Hot-keys” window and set its function or select one as you want. Then click “Ok” to save the setting.
How do you connect the XOPPOX Graphics Drawing Tablet to the computer?
Connect the USB data cable to the computer. When the green indicator blinks, wait until the green indicator is always on, and the icon in taskbar becomes colorful from gray after the computer recognizes the tablet device. Finally, the driver interface displays ‘The graphics tablet is connected’.
How do Mac users download the driver for the XOPPOX Graphics Drawing
Tablet?
Mac users can download the driver through a link provided in the guide.
Is the XOPPOX Graphics Drawing Tablet driver-free for Windows users?
Yes, Windows users can enjoy driver-free online teaching.
What is the XOPPOX Graphics Drawing Tablet used for?
The XOPPOX Graphics Drawing Tablet is used for handwriting input and pressure induction, making it suitable for online teaching and drawing software. It simulates the strokes of pencils, markers, watercolors, brushes, and oil brushes. It is also compatible with mobile phone or PC tablet drawing software.