RUIXINDA WB46-Q6 Levitating Bluetooth Speaker User Manual

RUIXINDA WB46-Q6 Levitating Bluetooth Speaker User Manual

Dear Valued Customer,

Thank you for choosing this product! In order to better understand its performance and use it safely please read this user manual carefully before using our product. Please keep this user manual tor future reference.

Yours sincerely,

Regards

Features

1. This cool levitation bluetooth speaker experience with Hi-Fi sound, elegant design and easy to use, perfect combination of modern and classic-
2. high-tech Bluetooth .wireless system, power conserving, Jaw per consumption high quality music effect transmission, enable you enjoy acoustic music at anytime from anywhere.
3. Portable and mobile bluetooth speaker with integrated stereo system, connects various bluetooth devices wirelessly, including Computer, Mad, It phone,. etc
4. Can be also wed as a standalone Bluetooth air without the base.
5. Revolve 160 degrees levitating in the air with 15mm above the base and colorful tight flashing,
6. Built-in rechargeable battery for a playtime of 6 hours with medium sound.

How to get the UFO Speaker levitating

1. Place the base on a horizontal surface, plug the adapter in power supply and DC Power Jack (Note: there is strong magnet in the base, keep it away from any metal.)
2. Hold the UFO Speaker tightly and horizontally with two hands(Picture a), then put it 10 cm above from the top surface of the base and move a vertically downwards the center of the base slowly to try to get the levitating point(Picture b).
3. Once feeling a strong force that is suspending the UFO Speaker from the base, this position (about 15mm above the top surface of the base) is the levitation point. At this moment, release the UFO carefully Picture c). (Note it fad to get the levitating point up to 10 times, the base will get heat. Please stop and unplug the adapter to let the base cool down for 5 minutes, then try again.)
4. Rotate the UFO Speaker slightly and it will spin automatically.
   

UFO Speaker Specification:

Output Power: 5W
Bluetooth version: V5.0
Bluetooth connection range: 10 meter
Battery capacity: 317V/900 mAh
Frequency: 100Hz-18 KHz
Distortion: <1%
Signal and noise ratio: ≥80db
Product Size: 140mm (Diameter), 55 mm (Height)
Power Supply: DC 12V
Power Rating: 5-10W
Base diameter: 17.5CM B
Base height: 4.5CM
Levitating Height: oboist 10-14mm

1. DC power adapter
2. UFO Speaker
3. Magnetic levitation Base

Light indicator introduction

Red light. for charging
Blue light for searching
bluetooth device nearby or for pairing the bluetooth device successfully

UFO Speaker Charge

1. Plug the micro USB end of the provided data cord into the micro U58 port of the speaker and plug the other end into the computer or other power supply of DC 5V
2. Red light is on while charging, and red light is off when firly charged. Unplug the US B charging cable after fully charged.
3. Built-in overcharge protection system to protect the battery in case of charging for long time

Base Specification

Power Supply: DC 12V.2A
Power Rating: 5-10W
Base diameter 17.3CM
Base height: 500
Weight: about. 637g

Key Definition and Function as below

Bluetooth Pairing

• Turning on the UFO speaker will enter into bluetooth mode automatically with blue LED flashing.
• Turn on Bluetooth function of mobile devices (cell phone, Ipad, etc) and.start to search the bluetooth device
• Select Bluetooth device named “UF0001” manually for pairing.The blue light flashing is on win warning tone when paring successfully
• The UFO Speaker will pair with bluetooth device it bluetooth mode automatically if they have paired previously,

Low Battery Display

When the battery is low ,blue LED indicator light on top will be flashing with warning tone. If the speaker won’t be used for long time, please charge it at least once every month for preserving battery life.

Package Contents:

1x Portable Bluetooth Speaker
1x Magnetic base
1x Power adapter
1x USB charging cable
1x User Manual

Caution:

In order to use the speaker correctly and enjoy wonderfull home theater experiance, please read carefully and comply with following:

1. DO NOT crash against the speaker and the base.
2. DO NOT touch chemicals including benzene and diluent.
3. DO NOT close to strong magnetic field and electric field.
4. please keep away from the direct rays of the sun and heating vessels.
5. DO NOT Disassemble, fix and reinvent the product unprofessionally
6.  Please deal with obsolete package, battery and old electronic products classifiably in rights ways.
7. Avaid shaking and knocking on the base violently to advoid damaging the magnetic levitation system in the base.
8. DO NOT knock on or smash the floating bluetooth speaker to perevnt it from down and damaging.
9. When levitating the speaker, if unable to find the floating position within 10 minutes and the bose become heat, please disconnect the power and try again until the base cools down..
10. Please keep electronic products 20CM away from this product to avoid mutual interference.
11. Only when you find the levitation point you can release the orb.
12. Take away the speaker before turning on tt i! power in case it fall down .
13. This is high-tech product of precision and unprofessional disassemble would be not allowed. Manufacture will be not responsible for any damage due to wrong operation.
14. This product is suitable for children under 6 years of age
15. for indoor use only.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20 cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>