Shenzhen Lishide Technology T11 Bluetooth Earphone Instruction Manual
- June 5, 2024
- Shenzhen Lishide Technology
Table of Contents
T11 blue tooth earphone
V5.0+ LED
FCC ID: 2A6E6-T11
TWS E7s/T11 Digital display Manual
| Bluetooth version | V5.0+BR&EDR |
|---|---|
| Bluetooth protocol | A2DP1.3/1–IFP1.6/HSP1.2/AVRCP1 6/D11.3 |
| Bluetooth Frequency | 2.4GHZ |
| Battery capacity | The headset is 50 mah. 1800 mah recharge sable storehouse |
| Bluetooth Range | 10 meters with no obstacles |
| Talk/playtime | Single earbud mode: 4 hours One pair earbuds mode: 3 hours |
Key Functions
| Power on | Long press the function button for 3 seconds |
|---|---|
| Play/Play pause | Press the function button |
| Previous piece | Double-click the vice machine |
| Next track | Double-click on the host |
| Add voice | Three strikes the host |
| Sound reduction | Three pairs of machine |
| SIRI | Long press the function button for 2 seconds |
| Switch Chinese and English | In the pairing state, double-click the function |
button to switch the prompt tone in Chinese and Englis
Instructions
Bluetooth pairing| Pick up the charging bin and start up automatically. After
starting up, the main and secondary engines will pair up automatically. After
successful pairing, the host machine will flash red and blue alternately. This
time the phone searched Bluetooth name connection.
---|---
Charging| After the earphone alarm low power alarm sound, it is put into the
charging bin for charging. After charging, it is automatically turned off.
When charging, the white light is long and the la
Answer calls| When calling, press the function button to answer the call and
then press the button again to hang up the call.
- Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
- Far-high WIFI router and other high-frequency transmitting equipment will affect the signal reception of the unit, resulting in sound card breaking and disconnection.
- Please use this product in an effective environment (10 meters), and there should be no physical barriers (such as walls, etc.) between the Bluetooth device and the headset.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide asonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>