T nB CBFLOWNC Flow Bluetooth Headphone Instructions

T nB CBFLOWNC Flow Bluetooth Headphone

OUR THANKS
Congratulations on your purchase and thank you for your trust and confidence in T’nB. Our products comply with the regulations and standards in force. Before using this device, we recommend that you read the instructions and safety guidelines carefully and keep this manual for future reference.

IMPORTANT SAFETY GUIDELINES

• The power supply of your device must match the initially designed original specifications.
• Never use your device under water or in places that are too damp.
• Do not place flammable objects, explosive substances or dangerous objects near your device.
• Use and store your device in an environment where the temperature is between-10 °C and 60 °C.
• Keep your device out of the reach of children.
• Do not disassemble your device or try to repair it yourself.
• Do not use your device if it has been subjected to impact or is damaged.
• To avoid the risk of electrocution, unplug your device from the main power supply and from any device before cleaning it or if you are not using it.
• TnB declines any liability in case of misuse of the product or use with a device with incompatible electrical characteristics
• It is recommended to protect the battery when not in use to avoid damage from a fall.
• Do not use abrasives to clean the device.
• Do not leave the device near sharp objects that could scratch or damage it.

RECHARGING YOUR HEADPHONE

To recharge your headphone, use the Micro-USB cable supplied with it.
Connect the cable to the case and then connect the other end to a USB port (2) :computer, USB charger, etc. The indicator light (3) will be red while charging.
Once fully charged, the red light will turn off. Charge time is about 2.5 hours on an empty battery.
When your headphone is running out of battery, a red light will flash and a warning beep ill come up every 5 minutes.

TURNING ON YOUR HEADPHONE

To switch on your headphone, press and hold the multifunction button (6) for 3 seconds. A voice will let you know by saying: “Power on’, and a red and blue light (3) will flash alternately. The headphone will enters into paring mode automatically.

PAIRING

1. Ensure that your phone or Bluetooth device is switched on.
2. Switch on the headphone. It will enters into pairing mode automatically, and a blue and red light indicator will starts to flash alternately quickly.
3. Activate the Bluetooth feature on your device, and select “T’NB FLOW”. A voice will let you know that the bluetooth is connected by saying «Connected ».
4. When successfully connected, a blue light will be on continuously.
5. Once connected, everytime the headphone will be on, it will automatically be paired to your device.

TURNING OFF YOUR HEADPHONE

To switch off your headphone, press and hold the multifunction button (6) for 3 seconds and release the button when the red and blue light (3) are off.A voice will let you know by saying: ” Power off»

FUNCTIONALITIES

• Play/Pause: Press the multifunction button (6) once. Press once again to restart the music.
• Adjust the volume: short press on the « +» button (7) to increase the volume / on the « – » button (5) to reduce the volume. A beep will let you know when you reach minimum and maximum volume.
• Changing tracks: Press and hold the « +» button (7) to select the next song/press and hold the «-» button (5) to select the previous song.
• ANC mode: Switch the ANC button (1) to put it on, a green light will turn on. To turn it off, switch the button again, and the green light will turn off.
• Answering/Ending a call: When you receive a call, the music will automati- cally turn off. Press the multifunction button (6) once on the headphone to answer, do the same to hang up. Once you hang up, your music will automatically start playing again.
• Reject a call: double click on the Multifunction button (6).
• Siri: Say “Hi, Siri” or press 3 times the multifunction button (6) to wake up Siri.

PASSIVE MODE

You can use your headphone asa wired one to save batteries. Simply connect one end of the 3.5-3.5 audio cable to your headphone, and one end to your device. Inserting an audio cable disable the wireless functionality.

SPECIFICATION:

• Bluetooth chipset: ATSs3015
• Bluetooth: 5.0
• Active noise cancelling: up to 20-23 dB
• Maximum range: 10m
• Frequency range: 20HZ-20KHZ
• Driver unit: 40mm
• Impedance: 320
• Headphone sensitivity: 102dB:3dB
• Microphone sensitivity: -42dB
• Battery: Lithium ion battery 3.7V/400mAH
• Charge: Micro-USB cable
• Charging time: 2.5 hours
• Working time: 16 hours with 25% Volume (Bluetooth only) / 12h with 25% volume (Bluetooth & ANC)

NEED HELP

We are committed to providing high customer satisfaction and we would be pleased to hear from you at info@t-nb.com. For servicing, troubleshooting and other information on this product, please visit our website: www.t-nb.com.

Direct current
To indicate on the rating plate that the equipment is suitable for direct current onlv: to identify relevant terminals.

Prolonged listening at full volume can damage the user’s ear.
t-nb.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>