AVWOO A6 White Noise Sleep Instrument Bluetooth Speaker Instruction Manual

AVWOO A6 White Noise Sleep Instrument Bluetooth Speaker

This product aims at providing you with a soothing sleep environment. You might be able to fall asleep more easily by enjoying the relaxing sounds. In addition, it could mask distracting background noises to improve your concentration while reading, studying or working.

Features

• Various vocal choices: There are 26 different types of sleeping aid music. You can also customize the import of your favorite music.
• Turn into Bluetooth speaker: The device can be used as an external speaker through Bluetooth pairing, and it can switch dual mode with one button.
• Timed shutdown function: There are 30 minutes, 60 minutes, 90 minutes of timed shutdown function.
• Single loop function: You are able to repeat a specific sound based on personal preferences.
• Volume adjustment knob: Turn the knob to conveniently switch on/off the device and adjust the volume.
• Compact dimension: Palm-sized body for easy hold and grab; lightweight design for travelling.
• Long battery life: The built-in 1200mAh large capacity battery supports all night playing without intermediate charge.

Battery charging precautions

The product has a built-in rechargeable lithium battery. Please charge it as follows before the first use (or when the battery is low):

• Connectthe Micro connector of the USB charging cable to the DC SV port on the side of the main unit;
• Connectthe large USB connector on the other end of the USB charging cable to the USB charging port of the computer or other USB charging ports of the DC 5V output.
  While charging, the 3 timer lights will become red; after fully charged, the red lights will go out.

Note:
Please follow the steps below to extend battery life.

1. Please fully charge before the first use for about 5-6 hours;
2. The product storage temperature is -20°C ~ 60°C (-4°F ~ 140 °F);
3. Do not overcharge the device (more than 24 hours) and do not keep the device on standby for too long (more than 3 months). Battery life expectancy will slowly decrease overtime.
4. The battery is inside the product and cannot be replaced;
5. If the device’s body or accessories are damaged, it is forbidden to use or charge.
6. When connecting to a computer to transfer data, please use the original wire in the package.
7. Low battery warning and automatic shutdown function: When the battery power is lower than 10%, the 3 timer lights will keep flashing, and the device should be charged in time; When the battery poweris lower than 5%, the device will automatically shut down.

Schematic illustration

1. Switch on(off) /Volume adjustment
2. Single loop button/ Mode switch button
3. “White noise” sounds (7)
4. “Fan” sounds (7)
5. “Nature” sounds (8)
6. “Aircraft” sounds (2)
7. Custom sounds (2 preset sounds can be deleted)
8. Timed shutdown button
9. 30-minute indicator
10. 60-minute indicator
11. 90-minute indicator
12. Micro USB charging port/ data transmission port/ audio output port

Basic operation of sleeping aid mode

1. Turn the knob clockwise to switch on the device. The default set is the sleeping aid mode, and music played before the last shutdown will play from the beginning automatically.

2. Gradually turn the knob clockwise to increase the volume.

3. Shortly press any button to turn on the button backlight. During playback, backlight of all buttons except the button corresponding to the selected sound (single loop/ timed shutdown) will go out after 20 seconds of the last operation.

4. Shortly press the corresponding button (multiple times) to select the wanted sound.
   In sleeping aid mode, the current sound will loop if the button® is pressed. The sound cannot be switched until the loop function is disabled.

5. Gradually turn the knob counterclockwise to decrease the volume. Switch off the device by turning the knob counterclockwise to the end.

Basic operation of Bluetooth mode

When using this product for the first time or connecting a new Bluetooth device with this product, please do the follow the instructions:

1. Turn the knob clockwise to switch on the device. Then long press button 8 to switch to Bluetooth mode with a prompt tone “Bluetooth Mode”
2. Enable the Bluetooth option of another external device. During the pairing process, the white indicator on the button flashes. The indicator stops flashing and keeps lit when the connection is successful.
3. At this time, only the button lights up. The button may light up as well if the timed shutdown function is selected.
4. In subsequent use, as long as the Bluetooth option of the same external device is enabled, the connection will be automatically done when switched to Bluetooth mode.
5. Long press the button eta switch back to sleeping aid mode.
6. Switch off the device or adjustthe volume in exactly the same way.

Note:

• The pairing name shown on other Bluetooth devices is “A6”.
• Please enter “0000” or “1234” if password is needed.
• When in Bluetooth mode, if unconnected, this device will automatically shut  downwithout operation after 10 minutes

Used as computer speaker

1. The device can be used as an external speaker when connected to a computer via a USB port.
2. To switch to sleeping aid mode or Bluetooth mode, long press the button .

Instructions for memory card data storage

1. Use the cable in the original package to connect with the computer. At this time, the default mode is data transmission.
2. After the computer reads the memory card successfully, import the music you like into the “FAVORITE” folder (the two original sounds saved in the folder can be deleted as needed)
3. Imported sounds in “FAVORITE” folder can be played by pressing the button on the device.

Note:

• The memory card can only transmit data when the device is switched on.
• Do not change the specified folder name, or the device may not work properly.
• When connected to a computer, data transmission can be performed in the  datatransmission mode. In the sleeping aid mode or Bluetooth mode, data cannot  betransmitted.
• Do not switch modes or power off the device during data transmission, otherwise, the data storage will be interrupted and the memory card might be damaged.
• After unplugging the USB cable, the device will switch to Bluetooth mode.

Common faults and solutions

connection distance

Parameters

Rated Power: 4W
Battery capacity: 1200mAh
Charging time: 3-4H
Working time: appr. 10H
Frequency: 80Hz-20KHz
Bluetooth version: 5.0
Bluetooth distance: ~10m
Built-in TF card capacity: 8 GB

Packing List

• Sound machine x 1
• USB cable (charging/data transmission) x 1
• Adaptorx 1
• User manual x 1
• Carrying pouch x 1

FCC Cautions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>