sercair D8001 Portable Mini Automatic Hand Disinfectant Spray Dispenser User Manual

Portable Mini Automatic

Hand Disinfectant Spray Dispenser
User Manual

Thank you for using our Sercair Vision M.
Please take few minutes to read this manual to familiarize yourself with the basic operation of this product.

Product Details

Thanks for choosing us, this product is a hand-held infrared induction sprayer. Please read the instructions before use and keep them for further consultation.

1. Key
2. Spray port
3. Infrared induction port
4. Hanging and therading hole
5. Press finger position
6. Type-C USB
7. Led incitador light
8. Sponge
9. Container bottle

Accessories

Sercair Vision M
USB Cable
User Manual

Accessories

Product Name: Sercair Vision M
Product Model: D8001
Product Size: 77 55 91 mm
Capacity: 45 ml
Spray Feature: Automatic alcohol spray
Induction Distance: 8 -12 cm
Material: ABS + Glass
Frequency 108 Khz
Power Input: Dc 5V / 1A
Color: White / Black

Instructions

1. Take out the equipment and press both sides of the bottom shell to take down.

2. Screw out the container bottle anticlockwise, take out the sponge then fill in less than 75% alcohol or other liquid with a volume of 4/5.
   Let it stand for two minutes, make sure that the sponge fully absorbs the liquid.
   Please note: It must be a water aqua or it will not atomize.

3. Put the sponge back and tighten the container anticlockwise, cover the bottom shell.

4. Press the On / Off button (blue light long on), product in operation status.

5. Put hand or items on top of the device for infrared sense. At the 0-12 cm of the hole, the spray begins. Disinfect the parts or articles held in the warehouse. Dynamic short time spray.

6. Press twice to shut down the product. The product will switch off if it doesn’t work for 24 hours.

Charging Instructions

When the machine is turned on, the green light of the product flashes which means that the battery power is too low and needs to be charged.

1. Connect the C end of the USB-C power cord to the Type-C connection of the product.
2. Connect the other end of the power cord to the lowest 5V / 1A supply socket.
3. The product starts to charge the internal battery, the green light flashes and the green light is always on when the battery is full.

Note: The product supports the function of charging and working at the same time which can be filled in 3 hours.

Attentions

1. This product does not provide disinfectant.
   Please buy it. 75% alcohol rate is recommended.

2. This product is nanocomposites grade microporous spray, do not put oily liquid to prevent plugging.

3. When you spray alcohol spray, please do not smoke or fire up.

4. Take good care of the children to ensure that they do not play with products as a toy, so as to avoid unnecessary accidents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>