Guangzhou Langwei Industrial Design WXCD LED Table Lamp User Manual

User Manual
LED Table Lamp

Please read the user manual carefully before using the product

Product Size

Product Parameters

Operating Instruction

1. Retrieve product from the package
2. Connect the USB wall plug and the USB cable on the lamp
3. Turn on the lamp with the touch switch. Touch the switch once to turn on the light. and the second time to turn off the light. Long press the touch switch to steplessly adjust the brightness.
4. Wireless Charger: Charge efficiently and fast with just a single move instead of cords. Compatible with iPhone12, iPhone mini iPhone 12 pro iPhone X, iPhoneXS iPhoneXR iPhoneXS MAX, iPhone8 , iPhone8 Plus, Galaxy Note 8, S8, S8 Plus, S7, Galaxy S7 Edge & All Wireless charging enabled devices.

Items included

1. LED Table Lamp*1
2. USB cable *1
3. Instruction Manual*1

Caution

Please use the product with care. The Smart LED Table Lamp consists of wood, plastic, and aluminum alloy. There are also sensitive electronic components. In case of damage caused by dropping, burning, crashing, or contacting fluids, please do not attempt to repair.
USe On the flat surfaces: Please place the Smart LED lamp on stable and flat surfaces. Avoid placing a lamp on soft and deformable surfaces like a bed or pillow
Avoid Water: Please keep away from water sources
Avoid covering the lamp: The temperature of the lamp will be increased during normal operation, avoid covering the lamp with any objects
Avoid looking at the lamp when turned on: Looking at the light source can be harmful to the eyes. avoid staring directly into the lamp when turned on
Cleaning: When cleaning, disconnect the power cord from the power source, waiting

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Designed and developed in Guang/hou
Made in China

Documents / Resources

| Guangzhou Langwei Industrial Design WXCD LED Table Lamp [pdf] User Manual
WXCD, 2A6WS-WXCD, 2A6WSWXCD, WXCD LED Table Lamp, WXCD, LED Table Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>