IDEAL AP30 PRO Air Purifier Instruction Manual

Air Purifier
Operating Instructions

Important safety instructions

Introduction Thank you for choosing a device from IDEAL.

Intended use

• The device is used exclusively for cleaning the ambient air indoors.
• Please read these operating instructions before starting to use the device and please follow the safety instructions.
  The operating instructions must be kept available with the device at all times.

Important safety instructions

Read and save these instructions:

• Please follow the safety instructions to prevent fire, electric shock, and injury to persons associated with the use of the appliance.
• Only use the device indoors.
• Only use a wall socket that supplies the correct voltage (see rating plate).
• Do not modify or repair the device.
• Do not use the device if the power cable or mains plug is damaged or if the connection at the wall socket is not stable.
• Make sure that the power cable does not get crushed while you are using the device and that it cannot be damaged in any other way. Place the cable so that no one will trip over it. Do not place the power cable under strain.
• Disconnect the plug from the wall socket for cleaning purposes, before servicing and whenever the device is not in use for a significant period of time.
• Do not touch the plug or the device if you have wet hands.
• Keep packing material, such as plastic wrapping, away from children! (Risk of suffocation)
• Place the device at least 10 cm away from the wall.
• Keep the device away from areas subjected to draft (wind).
• Make sure that furniture, fabrics, or other objects do not come in contact with the air intake/outlet or block them.
• Place the device on a stable, even surface and make sure there is sufficient air circulation.
• Do not spray any insect repellent.
• Do not use it in rooms where the device may come into contact with fuel vapor or metal dust.
• Do not use any volatile liquids, petroleum, kerosene, paint thinner, or polishing paste to clean the device. Such liquids may damage the surface of the device.
• Do not expose the device to rain, water, moisture, or high humidity, and do not set it up in a bathroom or kitchen next to a sink.
• Make sure that no foreign objects get into the outlet grilles.
• Do not use near an open fire or sparks.
• The device is not suitable for removing harmful gases (carbon monoxide, e.g. from heating appliances).
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction.
• Children are being supervised not to play with the appliance.
• Do not block the air intake and outlet.
• Keep this air purifier away from direct sunlight, naked flames or heat.
• Only use the air purifier in closed interiors and within the specified technical parameters. Improper usage may pose a threat to life and health.
• Do not use the unit near a fire alarm. If the outlet air is blowing towards a fire alarm, the alarm may respond late or not at all.
• Disconnect the mains plug prior to any cleaning or maintenance work.
• Replace the filter cartridge as soon as the filter replacement indicator (page 31) lights up. The average life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
• Clean the air purifier housing with a lint-free cloth moistened with soapy water.
• Clean the filter cartridge’s pre-filter with a vacuum cleaner.
• Do not use any solvents. These could damage the housing surface.
• Protect the air purifier from water.
• Do not use any substances containing silicone, since this could destroy the air quality sensor. Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol, since this could destroy the air quality sensor.
• Clean the textile cover with a vacuum cleaner.
• If necessary, the textile cover can also be washed by hand (please refer to the care instructions on the label).
• WARNING: Chemical Burn Hazard. Keep batteries away from children.
• This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution Risk of injury due to electric shock.
Always disconnect the mains plug prior to:

• Carrying out maintenance work or cleaning
• Moving the device
• Changing the filter

Danger
• Do not use any spray cans with flammable content near to the Air Purifier!

Danger
• Do not use any flammable cleaning agents.

Product features / Included in the box

Product features

• Filter replacement indicator:
  The air purifier indicates that the filter cartridge needs to be changed via a switch button (EASY touch) which flashes orange.

• Air purification in 5-speed settings

• 3-stage air purification system:
  Pre-filter, HERA filter coated with activated carbon

• 360° filter (Pre-filter, HEPA + active carbon)
  Easy maintenance and replacement of the filter cartridge.

Included in the box

Unpacking and setting up

Installation guidelines for optimum performance:

• Place the device at least 10 cm away from the wall.
• Keep the device away from areas subjected to draft (wind).
• Make sure that furniture, fabrics, or other objects do not come in contact with the air intake/outlet or block them.
• Place the device on a stable, even surface and make sure there is sufficient air circulation.

Take the textile cover (only IDEAL AP40 PRO) out of the protective film, place it around the filter cartridge and close it at the back (locking component A).

Insert the filter cartridge with the three snap-fit tabs into the three recesses provided for this and lock it at the locking component (A)

Connect the power cable to the device first, then to the socket. If the filter cartridge is missing or not installed correctly, the switch button (B) flashes red and the air purifier will not work.

Note: Use the original packaging to store the air purifier if you are not using it all year round. Pack and store the filter cartridge airtight to protect the activated carbon.

**** Safety information No operation of the air purifier without the complete and secure attachment of the cladding and safety covers (Motor protection grille, filter cartridge, etc.).

Operation

Startup / Fan speeds

1. Plugin the power cable, and press the switch button (B). The air purifier starts in automatic mode Cc. The switch button lights up.

2. Press the switch button to exit automatic mode. The air purifier now runs at fan speed 1 The switch button flashes once.

3. Press again to increase the fan speed to 2 . The switch button flashes twice. Press again to increase the fan speed to 3 (flashes 3 times) or to the turbofan spee (flashes 4 times).

4. If you press the switch button again, the air purifier switches to the Quiet function
   → The switch button lights up, but only dimly. -. The Quiet function is provided for particularly low-noise, unobtrusive operation (e.g. bedrooms). The air purifier switches to the lowest fan speed.

5. When the switch button is pressed again, the air purifier returns to automatic mode .

Note: The air purifier can be switched off by pressing and holding down the switch button. Just press it to switch the device back on.

Operation / Display

Display

Air quality indicator The air quality is displayed in 3 colors (in all fan speeds):

Switch button (B) green: good air quality
Switch button yellow: average air quality
Switch button red: poor air quality

Filter replacement indicator

The switch button (B) flashes orange to indicate that the filter needs changing (flashes at intervals).

• The life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
• If odors are no longer being filtered out, or if the filter produces unpleasant odors, then the filter cartridge needs to be replaced sooner.
• Only use the original IDEAL filter cartridge. The device will only function with an original IDEAL filter cartridge.

Note: If the filter cartridge is missing or not installed correctly, the switch button flashes red and the air purifier will not work.

Remote control (only IDEAL AP40 PRO)

Battery usage

• Always use 3V lithium batteries CR2025 for the remote control.
• Incorrect battery usage may result in leakage of battery fluid and/or damage.
• If the remote control is not going to be used for a long time, please remove the battery.

Unsuitable location

• Make sure that no objects or furnishings are situated between the remote control and the air purifier.
• The air purifier should not be placed in direct sunlight. This could impair the infrared sensor.
• Locations where fluorescent tubes are flickering because they are defective or old.
• Do not store the remote control in direct sunlight and/or close to radiators/heaters.

When using it for the first time

The remote control has a pre-installed lithium battery CR2025. Remove the protective flap to activate the remote control battery.

How to use it correctly

• Point the remote control at the air purifier (switch button B).

Remote control (only IDEAL AP40 PRO)

Replacing the battery

• Open the battery compartment by pressing (A) and pulling out (B) at the same time. Take out the flat battery.
• Insert a new battery into the battery compartment, making sure the polarity is correct (+ / -).
• Always use 3V lithium batteries CR2025.
• Slide the battery compartment back into its seating (C).

Important information about the batteries and how to dispose of them
Batteries must NOT be disposed of with household waste. As the user, you are legally obligated to return used batteries for proper disposal. You can hand in your batteries at public collection points in your community or wherever the same type of battery is sold.

• It is very important that you make sure that the polarity of the batteries is correct. Wrongly inserted batteries could destroy the device — a fire hazard.
• Do not try to open or damage batteries and do not throw batteries into a fire.
• Batteries that are leaking fluid are dangerous. Only touch these with suitable gloves.
• Keep batteries out of the reach of children.
• Take the batteries out of the device if you are not going to be using it for a significant period of time.
• The cells shall be disposed of properly, including keeping them away from children.
• Even used cells may cause injury.

Remote control (only IDEAL AP40 PRO)

Function

A: Select the required fan speed
B: Switches the air purifier to automatic mode
C: Switches the air purifier on/off ****.
D: Switches the air purifier to Quiet mode .
E: Select the required timer time .
Pressing the timer while the air purifier is switched on activates the “switch-off timer”
→  after the set time, the air purifier switches off. Pressing the timer button while the air purifier is switched off activates the “switch-on timer”
→ after the set time, the air purifier switches on. Visualization only in the app (smartphone/tablet).
F: Press the locking button to lock the air purifier switch button. Press the locking button again to unlock.
It can also be unlocked by disconnecting the air purifier from the mains.

Note: When the remote control is operated, the switch button on the air purifier lights up white for approx. 1 second in acknowledgment. If you press the air purifier switch button when the locking function is activated, it lights up briefly in red.

Filter replacement

Filter replacement (e.g. in accordance with the filter replacement indicator, see page 31)
Note:
Only original IDEAL filter cartridges (order from www.ideal.de) may be used. No tools are required to replace the filter cartridge.

CAUTION!
Take the mains plug out of the socket.
Turn the air purifier upside down. Pull the mains plug out of the device.

Unlock the filter cartridge at the locking component (A) and remove.

Remove the textile cover (only IDEAL AP40 PRO).
Remove the protective film from the new filter cartridge.

Put the textile cover (only IDEAL AP40 PRO) back on the filter cartridge and close it at the back (locking component A).

Insert the filter cartridge with the three snap-fit tabs into the three recesses provided for this and lock it at the locking component (A)

Connect the power cable to the device first, then to the socket. The device will only work if the filter cartridge is installed correctly.

Note: The air purifier automatically detects that a new IDEAL filter cartridge has been inserted and automatically resets the filter replacement indicator.
IDEAL filter cartridge Order no. 7310 099

App Control

Your purifier can additionally be controlled by the “IDEALAIRPRO” App via your smartphone/tablet (iOS /Android).

WLAN

Querying the WLAN status:
The air purifier is switched on. Press the WLAN button
→ the WLAN is enabled when the switch button flashes blue
→ the WLAN is disabled when the switch button flashes white.

Enabling/disabling WLAN
The air purifier is switched on.
Press the WLAN button and while the switch button is flashing (blue or white), press the WLAN button again to enable or disable the WLAN.

Resetting the WLAN:
The air purifier is switched on.
LLAN is enabled. Press and hold down the switch button and the WLAN button at the same time until the switch button flashes pink.

Cleaning and maintenance

**CAUTION:** Disconnect the mains plug prior to any cleaning or maintenance work!

• Replace the filter cartridge as soon as the filter replacement indicator (page 31) lights up. The average life expectancy of the filter is approx. 1 year (depending on operation and purification activities).
• Clean the air purifier housing with a lint-free cloth moistened with soapy water.
• Clean the filter cartridge’s pre-filter with a vacuum cleaner.
• Do not use any solvents. These could damage the housing surface.
• Protect the air purifier from water.
• Do not use any substances containing silicone, since this could destroy the air quality sensor.
• Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol, since this could destroy the air quality sensor.
• Clean the textile cover with a vacuum cleaner.
• If necessary, the textile cover can also be washed by hand (please refer to the care instructions on the label).

Accessories

You can source accessories via your dealer or at www.ideal.de.

Troubleshooting

The air purifier won’t switch on.| Is the power cable securely connected to the back of the device?

→  Make sure that the power cable is not damaged in any way
→ Check both ends of the power cable. Make sure that these are plugged in and that the purifier is connected to the power supply (page 29).

Is an original IDEAL filter cartridge installed? Is the filter cartridge also inserted correctly?
→ Make sure that an original IDEAL filter cartridge is inserted.
→ Make sure that the filter cartridge is clicked in place with all 3 tabs and is fully locked (page 29).

---|---
The switch button on the air purifier is not working. The buttons on the remote control do not work. (only IDEAL AP40 PRO).| Has the locking function been activated?
→ Disable the locking function on the remote control (only IDEAL AP40 PRO) or via the app (Function F Page 34).
-. Unplug the power cable and then plug it back in. Is the battery in the remote control? Or is it flat?

→ Check the battery (3V lithium CR2025).

Are you using it correctly?
→ Point the remote control at the air purifier (page 32).
→ Having joined the power cord or exchanged the filter, the function of the remote control is blocked for about 10 seconds.

The switch button is lit up only dimly or not lit up at all.| Is the air purifier switched on?
→ Switch on the air purifier by pressing the switch button (page 30). Has the Quiet function been activated?
→ If you press the switch button once, the air purifier switches to automatic mode.
→ Disable the Quiet function by selecting a different fan speed via the app or on the remote control (only IDEAL AP40 PRO).
---|---
The automatic mode is not working properly.| The air purifier is calibrating the air quality sensor. This happens when you first switch it on and after disconnecting it from the mains.
→ Wait until the calibration process has been completed (this may take a few minutes) The air quality sensor is not detecting the air quality reliably.
→ Calibrate the air quality sensor by briefly disconnecting it from the mains again!
Odors are not being filtered properly.| Is the air purifier continuously exposed to strong odors?
→ The filter needs to be changed (pages 35-36) because the activated carbon filter becomes saturated and reliable air purification is no longer guaranteed. Are the odors being drawn in at all?
→ Place the air purifier closer to the source of the odors.
→ Switch the air purifier manually to a higher fan speed (page 30).
The air purifier is making loud noises.| Is the filter cartridge really dirty?
→ Clean the pre-filter with a vacuum cleaner. Is the air purifier located on an even surface?
→ Place the device on an even surface. Is the air purifier running at a high fan speed?
→ Use the switch button to set a lower fan speed.

Did none of the specified solutions help you with your problem?
→ Contact: Service
• www.krug-priester.com
• service@krug-priester.com

Technical data

IDEAL AP30 PRO:

IDEAL AP40 PRO:

The company Krug + Priester has the following certifications:

• The quality management system according to DIN EN ISO 9001:2015
• Environmental management system according to DIN EN ISO 14001:2015
• Energy management system according to DIN EN ISO 50001:2018

Terms of warranty
IDEAL provides a warranty for this device from the date of purchase.
The terms of the warranty are defined by our local representative.

• If a material or design defect occurs during the warranty period, IDEAL shall repair or replace the device, or repay the purchase price, at its discretion.
• The warranty will only be honored if sufficient evidence is submitted, e.g. sales receipt and the claim under warranty is made within the warranty period.
• The warranty does not cover wearing parts or parts that need to be replaced regularly.
• The warranty shall be void if the device is not set up, adjusted, and cleaned/maintained correctly (in accordance with the operating instructions).
• The warranty shall be void if the device is connected to a power supply that does not comply with the rating plate data.

Storage
We recommend storing the air purifier in its original packaging in a cool, dry place. Pack and store the filter cartridge airtight to protect the activated carbon.
Spare parts and accessories
You can source spare parts via your dealer or at www.ideal.de. Only use the manufacturer’s original parts.
Repairs
Repairs must only be carried out by qualified experts or the customer service department. This also applies if you have a defective power cable. Any attempt by untrained persons to perform repairs may pose a considerable risk to the user and invalidate the warranty.

Disposal
This device must not be disposed of with household waste! Please hand this device in at the collection points provided! Collecting and recycling electrical and electronic waste conserves valuable resources! The packaging material can be recycled. Dispose of the packaging in an environmentally friendly manner and take it to the recyclable waste collection.
Thanks!

This machine is GS-tested and conforms to the following EC guidelines:

• 2014/35/EU for electrical safety
• 2014/30/EU for electromagnetic compatibility.
• 2011/65/EU, 2015/863/EU RoHS. For specific technical data, please refer to the information on the identification plate of the machine.

To file a warranty claim, the device must still bear its original identification plate.
Subject to technical changes.

EC-declaration of conformity
– Herewith we declare that

GS-(DENT. No.
IDEAL AP30 PRO Made in Germany 11731002 IDEAL AP40 PRO Made in Germany 11731001
– complies with the following provisions applying to it 2014/35/EU Low voltage directive

2011/65/EU, 2015/863/EU
RoHS directive

2014/30/EG EMV
Electromagnetic compatibility directive
– Applied harmonised standards in particular
UL-IDENT. No. 10731002 10731001
IEC 61000-3-2; IEC 61000-3-3; EN 61000-3-2; EN 61000-3-3;
EN 60335-2-65; EN 60335-1; EN ISO 13857; EN 55014-1;
EN 55014-2; BS EN 55014-1; BS EN 55014-2 ; BS EN 61000-3-2; BS EN 61000-3-3; BS
EN 60335-2-65; BS EN 60335-1; BS EN ISO 13857-1
Authorized representative for technical documentation:
Krug & Priester GmbH & Co. KG Simon-Schweitzer-Str. 34 D-72336 Balingen (Germany)

09.02.2022
Date
– Managing Director –

Supplier‘s Declara on of Conformity
47 CFR § 2.1077 Compliance Informa on

This device complies with part 15 of the FCC Rules. Opera is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera.

Manufacturer:
KRUG + PRIESTER GMBH & CO KG
Simon-Schweitzer-Straße 34
72336 Balingen, Germany

U.S. Responsible Party:
MBM Corpora on
3134 Industry Drive
North Charleston SC, 29418
TeTT l: 843-552-2700
Mail: info@mbmcorp.com

Trade Name: IDEAL
Models: AP 30/ 40/ 60/ 80/ 140 PRO
Classi ca on: FCC Part 15B

We hereby declare that the equipment bearing tradename and model number speci ed above was tested conforming to the applicable FCC rule part(s) 15B and the most accurate measurement standards We con rm that the necessary steps have been taken and are in force measurement standards. We con rm that the necessary steps have been taken and are in force to assure that the product of units of the same equipment will con nue to comply with the Commission’s requirements.
Krug + Priester GmbH & Co KG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen al installed on. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However,r there is no guarantee that interference will not occur in a par cular installed on. If this equipment does cause harmful interference to radio or television Recep on, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separa on between the equipment and receiver.rr
—Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
To ensure compliance with FCC and ISED RF exposure requirements this device must be installed to provide a minimum of 20cm between the device and people.

@ideal_luftreiniger

@idealluftreiniger

KRUG+PRIESTER

Krug & Priester GmbH & Co. KG
Simon-Schweitzer-Str. 34
D-72336 Balingen (Germany)
www.krug-priester.com
9700282 02-2018 09.02.2022 zm

References

• Fresh Nuts, Southern Candy, Baked Goods, and More | Priester's Pecans
• IDEAL: Aktenvernichter, Schneidemaschinen und Luftreiniger | IDEAL
• Willkommen bei Krug + Priester I krug-priester.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>