RIDGID R866011 18V 3/8 Cordless Ratchet: Owner’s Manual

The RIDGID R866011 18V 3/8 Inch Brushless Cordless Ratchet is a powerful and versatile tool that can make any job easier and more efficient. However, it is important to understand how to use it safely and correctly. This owner’s manual provides detailed instructions on how to operate and maintain the ratchet, as well as important safety warnings and guidelines to follow. Before using the tool, users are strongly advised to read and understand the manual thoroughly. Additionally, it is recommended to register the product at register.ridgidpower.com to receive important updates and information about the product. The manual covers a range of topics, including general power tool safety warnings, electrical safety, personal safety, power tool use and care, battery tool use and care, and ratchet safety warnings. By following these guidelines, users can ensure that they are using the RIDGID R866011 18V 3/8 Inch Brushless Cordless Ratchet safely and effectively for all their projects.

OPERATOR’S MANUAL MANUEL D’UTILISATION MANUAL DEL OPERADOR 18 V VOLT 3/8 in. RATCHET CLIQUET DE 9,5 mm (3/8 po) DE 18 V CARRACA DE 18V DE 9,5 mm (3/8 pulg.) R866011

To register your RIDGID product, please visit: register.ridgidpower.com WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. SAVE THIS MANUAL FOR FUTURE REFERENCE

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY

•  Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
•  Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
•  Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. The use of a GFCI reduces the risk of electric shock.
• Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 988000-302.

PERSONAL SAFETY

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention whileoperating power tools may result in serious personal injury
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
• Do not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.
• Do not use a ladder or on unstable support. Stable footing on a solid surface enables better control of the power tool in unexpected situations.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate at which it was designed.
• Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. P roperly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account t
• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265° F may cause an explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

RATCHET SAFETY WARNINGS

• Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
• Know your power tool. Read the operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this powerful tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Always wear eye protection with side shields marked to comply with ANSI Z87.1 when assembling parts, operating the tool, or performing maintenance. Following this rule will reduce the risk of serious personal injury.
• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
• Protect your hearing. Wear hearing protection during extended periods of operation. Following this rule will reduce the risk of serious personal injury.
• Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
• Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
• Do not crush, drop or damage the battery pack.  o not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
• Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of an open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
• Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also.

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL| SIGNAL| MEANING
| DANGER:| Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
| WARNING:| Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
| CAUTION:| Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.

NOTICE:

| (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential Injury (e.g. messages relating to property damage).
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL NAME DESIGNATION/EXPLANATION
| Safety Alert| Precautions that involve your safety.
| Read Operator’s Manual| To reduce the risk of injury, users must read and understand the operator’s manual before using this product.
| Eye Protection| Always wear eye protection with side shields marked to comply with ANSI Z87.1.
| Wet Conditions Alert| Do not expose to rain or use in damp locations.
| Hot Surface| To reduce the risk of injury or damage, avoid contact with any hot surface.
| Recycle Symbol| This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws may prohibit the disposal of batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/ or disposal options.

V

| Volts| Voltage

min

| Minutes| Time
****| Direct Current| Type or a characteristic of current

no

| No Load Speed| Rotational speed, at no load

…/min

| Per Minute| Revolutions, strokes, surface speed, orbits, etc., per minute

FEATURES

PRODUCT SPECIFICATIONS Anvil ………………………………………………………………… 1/4 in. No Load Speed ………………………………….0 – 325/min RPM Maximum Torque …………………………………………… 45 ft- lbs.

ASSEMBLY

WARNING: Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.

WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misused and could result in a  hazardous condition leading to possible serious personal injury.

OPERATION

WARNING: Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

WARNING: Always remove the battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: • Removing and installing threaded fasteners INSTALLING/REMOVING THE BELT HOOK (NOT INCLUDED) See Figure 1, page 8.

• Align a hole in the belt hook with a hole in the tool’s base.
• Install the screw to secure the belt hook in place.
•  To uninstall, remove the screw and then the belt hook.

INSTALLING/REMOVING BATTERY PACK See Figure 2, page 8.

• Insert the battery pack into the product as shown.
• Make sure the latches on each side of the battery pack snap into place and that the battery pack is secured in the product before beginning operation.
• Depress the latches to remove the battery pack. For complete charging instructions, see the operator’s manuals for your battery pack and charger.

INSTALLING/REMOVING BATTERY PACK See Figure 2, page 8.

•  Insert the battery pack into the product as shown.
• Make sure the latches on each side of the battery pack snap into place and that the battery pack is secured in the product before beginning operation.
• Depress the latches to remove the battery pack. For complete charging instructions, see the operator’s manuals for your battery pack and charger.

LOCKOUT LEVER See Figure 3, page 8. The lock-out lever reduces the possibility of accidental starting. The lock lever must be in the unlocked position before you pull the switch trigger. When not in use, slide the lock lever up to lock the switch trigger.

VARIABLE SPEED SWITCH TRIGGER See Figure 4, page 9. The variable speed switch trigger delivers a higher speed with increased trigger pressure and a lower speed with decreased trigger pressure. To turn the tool ON, move the lock-out lever to the unlocked position and depress the switch trigger. To turn it OFF, release the switch trigger and allow the tool to come to a complete stop.

NOTE: A whistling or ringing noise coming from the switch during use is a normal part of the switch function. WARNING: Battery tools are always in operating condition. Lock the switch when not in use or carrying at your side, when installing or removing the battery pack, and when installing or removing sockets. LED LIGHT See Figure 4, page 9. The LED light near the collar illuminates when the switch trigger is depressed. If the tool is not in use, the time-out feature will cause the light to start fading and then shut off. The LED light illuminates only when there is a charged battery pack in the tool. INSTALLING AND REMOVING SOCKETS See Figure 5, page 9. Always select the correct size socket for nuts and bolts. Using the wrong size socket may damage the nut or bolt and cause the fastening torque to be inaccurate or inconsistent.

•  Lock the switch trigger and remove the battery pack.
•  Push a 1/4 in. socket (not included) onto the anvil until the detent pin locks it into place.
•  To remove the socket (not included), pull it away from the anvil.

OPERATING THE RATCHET See Figure 6, page 9. WARNING: Do not drive a bolt where there is likely to be hidden wiring behind the surface. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. If you must drive a bolt where the hidden wire could be present, always hold the tool by insulated gripping surfaces (handle) when performing the operation to prevent a  shock to the operator.

WARNING: The ratchet head may become hot during periods of extended use or when the tool is under stress. Allow the ratchet head to cool completely before touching the ratchet head.  touching a hot ratchet head could result in burns or other injuries.

NOTICE: The ratchet is not designed to be used as a drill. Proper fastening torque is determined by the kind of bolt, the size of the bolt, or the material of the workpiece. This tool is designed only to speed the installation and removal process and is not intended to replace a torque wrench. For applications where proper torque is important, always use a torque wrench to verify that proper torque is achieved. NOTE: Do not use this tool to install lug nuts on wheels.

• Install the desired socket.
• Adjust the dial on the back of the ratchet head to choose the desired rotation direction of the socket.
• Hold the tool in front of the workpiece with the socket over the nut or bolt.
• Depress the switch trigger and fasten or loosen as desired. NOTE: After fastening, always check the torque with a torque wrench.

NOTICE: Do not turn the tool off and attempt to use the tool manually to gain extra torque on the nut or bolt being tightened. Doing so could cause damage to the fastener and/or the tool.

NOTE: MAINTENANCE INFORMATION AND TROUBLESHOOTING BEGINS ON PAGE 7 AFTER THE FRENCH AND SPANISH LANGUAGE SECTIONS. ILLUSTRATIONS START ON PAGE 9. This product has a 90-Day Satisfaction Guarantee Policy, as well as a Three-year Limited Warranty. For Warranty and Policy details, please go to powertools.ridgid.com or call (toll- free) 1-866-539-1710.

Customer Service Information:

For parts or services, do not return this product to the store. Contact your nearest RIDGID® authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.RIDGID.com. MODEL NO. ____SERIAL NO._ __

TTI CONSUMER POWER TOOLS, INC. P.O. Box 1427 Anderson, SC 29622, USA 1-866-539-1710 • www.RIDGID.com RIDGID is a registered trademark of RIDGID, Inc., used under license. 998000813 4-19-22 (REV:02)

SPECIFICATIONS

tools in explosive atmospheres. Keep children and bystanders away while operating a power tool.
Electrical Safety| Power tool plugs must match the outlet. Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions. Do not abuse the cord. When operating a power tool outdoors, use an extension cord suitable for outdoor use. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 988000-302.
Personal Safety| Stay alert and use common sense when operating a power tool. Use personal protective equipment. Prevent unintentional starting. Remove any adjusting key or wrench before turning the power tool on. Do not overreach. Dress properly. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. Do not wear loose clothing or jewelry. Contain long hair. Do not use a ladder or on unstable support. Keep handles and grasping surfaces dry, clean, and free from oil and grease.
Power Tool Use and Care| Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn on and off. Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Maintain power tools and accessories. Keep cutting tools sharp and clean. Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Keep handles and grasping surfaces dry, clean, and free from oil and grease.
Battery Tool Use and Care| Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs. When the battery pack is not in use, keep it away from other metal objects. Under abusive conditions, liquid may be ejected from the battery; avoid contact. Do not use a battery pack or tool that is damaged or modified. Do not expose a battery pack or tool to fire or excessive temperature. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
Service| Have your power tool serviced by a qualified repair person using only identical replacement parts. Never service damaged battery packs.
Ratchet Safety Warnings| Hold power tool by insulated gripping surfaces. Use auxiliary handle(s), if supplied with the tool. Know your power tool. Always wear eye protection with side shields marked to comply with ANSI Z87.1. Protect your lungs. Wear a face or dust mask if the operation is dusty.
Symbols| Various symbols are used throughout the manual to indicate different warnings and instructions. Examples include the warning symbol, the electrical shock hazard symbol, and the eye protection symbol.

FAQS

What should I do before using the RIDGID R866011 18V 3/8 Inch Brushless Cordless Ratchet?

Before using the tool, users are strongly advised to read and understand the manual thoroughly. Additionally, it is recommended to register the product at register.ridgidpower.com to receive important updates and information about the product.

What should I do if I need to use the power tool in a damp location?

If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. The use of a GFCI reduces the risk of electric shock.

Can I modify the power tool plug in any way?

No, power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.

What should I do if the switch does not turn on and off?

Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

Can I use any battery pack with my RIDGID R866011 18V 3/8 Inch Brushless Cordless Ratchet?

No, use power tools only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire.

What should I do if my battery pack or tool is damaged or modified?

Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.

What should I do if I need to service my power tool or battery pack?

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Can I use the RIDGID R866011 18V 3/8 Inch Brushless Cordless Ratchet without eye protection?

No, always wear eye protection with side shields marked to comply with ANSI Z87.1 when assembling parts, operating the tool, or performing maintenance. Following this rule will reduce the risk of serious personal injury.

References

• RIDGID :: Home
• RIDGID Powertools :: Login
• Rugged Jobsite Tools | RIDGID Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>