USUB SC01-40AU-LT-F Charging Cabinet User Manual
- June 5, 2024
- USUB
Table of Contents
USUB SC01-40AU-LT-F Charging Cabinet
WARNING
- This cart is intended for use only with loading as indicated. Use with loads greater than indicated may result in instability
- Please place the devices from the bottom to top shelf to avoid the tilting
- Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on to the child.
- Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or overturning onto a child.
- DO NOT allow anyone to sit, stand or climb on the cart.
- DO NOT lift the cart.
- DO NOT block the ventilation holes used for air circulation. When moving the cart,
- DO NOT put any devices (ex: TV, Monitor, Document’s camera…etc.) on top of cart.
- No TV/monitor is to be used on top of cart.
- Before moving the cart, disconnect the power from the wall outlet.
- While moving the cart, make sure the power cord is secured and tightly wrapped.
Introduction
Cart Dimensions
| Model | Description | Dimension WDH (mm) |
|---|
Laptop & Tablet Charging Cart, Charging Type: AC + USB charging
SC01-30AU-LT-F| 30(103) devices, with fast charging| 8206501257
SC01-40AU-LT-F| 40(104) devices, with fast charging| 8206501587
Cart Diagram
Setup
USB charging operation
- Disconnect the charger in advance and open the cabinet door.
- According to the tablet number, put the tablets one by one into the tablet rotation slot corresponding to the number.
- The two ends of the USB cable are connected to the charging HUB port on the device and the tablet port respectively.
- After the connection is completed, lock the cabinet door and plug the power plug of the charging car into the mains outlet for charging。
- Switch the main power switch to “ON”, and then all charging units’ LED charging status indicator lights up red, and the device is in charging state.
AC charging operation with adapter
- Disconnect the charger in advance and open the rear door.
- Plug your tablet or laptop charger into the socket at the back of the car one by one, then thread the cable through the hole; For laptop charges, place the adapter in the bucket below the thread hole.
- Open the front door of the charging car.
- Jam the data line with the buckle and arrange the data line.
- Place tablets or laptops one by one in the tablet (laptop) slot and connect to the corresponding data cable。
- After the connection is completed, lock the cabinet door, and plug the power plug of the charging car into the mains outlet for charging。
- Switch the main power switch to “ON”, and then all charging units are in charging state。
Specifications
Service environment
| Working temperature | 0℃~45℃ |
|---|---|
| Working environment humidity | 20%~80% |
| Humidity of storage environment | -15℃~45℃ |
The machine has passed CE certification and RoHS certification
Product Parameter
Main material
| The main body adopts 1.0mm-1.5mm cold-rolled steel plate. The main frame adopts high strength aluminum profiles, the cabinet is provided with ABS engineering plastic partition
layer, layering the tablet is effective in preventing scratches
---|---
Input| AC 220-240V 50Hz 16A
Product power| 3500W
Cooling system| Forced air cooling
Output
| USB: 5V 2.1A
AC: 220-240V 50Hz 13A
Status indicator light| Red light: in charging state; Green light:
full/disconnected
External AC socket| Standard: BS1363 socket*1pc
System compatibility| Android system, iOS system, Windows System
Super compatible
| 1. Other Android devices
2. Other mobile terminals
3. V+/V-No agreement class
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>