Audionic AirBuds 2 Wireless Earbuds User Manual

Audionic AirBuds 2 Wireless Earbuds User Manual

Charging for Earbuds

Charging: Light of earbuds red
Light of charging case blue
Full charged: Lights of earbuds and
charging case both off

2-Way Charging for Case

1. USB-C Cable
2. Wireless Charging (package not include wireless charger)

Charging: White Light Flash
Full Charged: White Light On

Touch for Music

Touch for Call

1x Answer/End Cali

Hold
Decline Call

POWER ON/OFF EARBUDS

1. Take out the earbuds from charging box to power on;
   Put the earbuds back to charging box to power off.

2. Long press either one earbuds until power on/off.

PARING

Take out earbuds and make sure LED of earbuds flashing red and blue, the left and right will pair each other automatically.
Switch on bluetooth of your phone and find device name “AirBuds 2” for connection.

Tips

1. Indoor: Please use it in a room without wall-iike barriers, and the
   distance between earbuds and phone should not be too far.

2. Outdoor: If there are lots of WiFi/4G signals or other electric appliances around, it is easy to cause sound stuck/interruption.

3. Waterproof: Can not wearing in swimming pool, the earbuds only available for IPX5 standard like light rain or sweat resistance.

4. If only one side can listen music: Put both earbuds back to case and close cover, take them out and check again.
   If still not working, try to delete the device “AirBuds 2” from phone bluetooth and switch off bluetooth, and pair once again.

MAIN SPECIFICATION

Model NO.: AirBuds 2
BT Version: V5.1
Wireless distance: <10m
Audio decoding: AAC, SBC
Input: DC 5V 1A
Battery capacity of charging box: 300mAh
Battery capacity of headset: 40mAh(single earbud)
Play time: about 4-5 hrs(single charge)
Charging time for charging box: about 1 hour

Scan for Extended Warranty

Activiation Code
269317

FCC ID: 2A6L8-AIRBUDS
Made in China

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by shenzhenshixuanfengshengwukejiyouxiangongsi may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement:
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The device is installed and operated without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>