Restore Solution Air Mover with Carpet Clamp Instruction Manual
- June 5, 2024
- Restore Solution
Table of Contents
Restore Solution Air Mover with Carpet Clamp
GENERAL INFORMATION
Packaging
Please DO NOT dispose of any packaging until you have checked the
appliance is operational. After removing the packaging ensure the contents are
intact and complete. In the unlikely event of missing parts; contact your
retailer. DO NOT leave children unattended with any of the packaging since
it is a potential source of danger. Disposal of all packaging must be carried
out responsibly and safely and in accordance with your local authority
regulations.
ALWAYS recycle the packaging material where possible.
WARNING! To reduce the risk of fire, electric shock or injury: When using
any electrically powered product, basic safety precautions should always be
followed.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard
- Ensure that the fan is switched off from the supply mains before removing the guard.
PLEASE READ THE INSTRUCTIONS CAREFULLY AND IN FULL BEFORE USING THE PRODUCT.
IMPORTANT SAFETY INSTRUCTIONS
WARNING-to reduce the risk of fire, electrical shock or injury to persons or property :
- Always operate the product from a power source of the same voltage, frequency and rating as indicated on the product identification plate.
- Do not operate any product with a damaged power cord or plug, after the appliance malfunctions, dropped or damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
- To reduce the risk of electric shock, do not expose the unit or flexible cord to moisture of any kind.
- Switch off and unplug from the power socket when not in use, before assembly or before cleaning.
- Do not place objects on the product or allow objects to obstruct the inlet or outlet openings, or operate in close proximity to wall or curtains etc.
- The use of attachments or accessories not recommended or sold by the product distributor may cause injury to persons or damage to property.
- This product is intended for normal light commercial use only.
- Do not attempt to dismantle the appliance.
- Do not operate the appliance on a metal surface.
- Do not use the appliance in artificially hot or humid conditions or allow to be used in a hazardous environment.
- Do not attempt to lift or move the appliance with the power ON or while the fan is running.
- Do not clean the appliance with organic solvent.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
- Children should not be left unsupervised with the appliance.
- This instruction manual is an integral part of the appliance and should be stored for safe keeping and must always accompany the appliance in the event of ownership transfer or for reference to by a service engineer.
READ AND SAVE THESE INSTRUCTIONS
EXPLODED PARTS DIAGRAM
| Item | Description | QTY | Item | Description | QTY |
|---|---|---|---|---|---|
| 1 | Guard, Fan side | 1 | 10 | Bolt-Flange 1/4-20×5/8 | 4 |
| 2 | Blower Wheel | 1 | 11 | Motor-1/2 HP | 1 |
| 3 | Rivet | 4 | 12 | Grommet-Rubber | 2 |
| 5 | Front Guard | 1 | 14 | Housing-Blower | 1 |
| 6 | Nut | 1 | 15 | Label | 1 |
| 7 | Knob | 1 | 16 | Screw-8-15×5/8 | 4 |
| 8 | Guard, Black Cord | 1 | 17 | Carpet Clamp | 1 |
| 9 | Switch-4 Position | 1 |
SAFETY FEATURES
Over Heat Protection
This fan motor is fitted with a thermal overload protection circuit to prevent overheating. If an overheat temperature is reached the unit will shut off automatically. Normal operation will resume when the appliance cools down.
Manual Reset
- Switch to the OFF position.
- Remove the plug from the main socket outlet.
- Check for obvious reasons that may have caused the appliance to over heat; for example: items placed over the air inlet or outlet.
- Wait for 15 minutes before re-connecting the appliance to the mains outlet and continue with normal operation.
OPERATING INSTRUCTIONS
- Ensure the control switch is powered to the off position before connecting to the power supply.
- Connect the main plug to a suitable 240V ~ 50Hz supply.
- Switch to Low or Medium or High speed, as required.
SPECIFICATION
AIR MOVER
MODEL: AP110004B
- Power Supply: 504/528/648W 240
- Class/Protection: Volts 50Hz I / IP20
- Rated Current: 2.1/2.2/2.7 Amps
- Net Weight: 14.5Kgs
- Dimensions: 460x 420 x 465 (mm)
CLEANING
- Before cleaning turn the unit off and unplug from the power supply.
- To clean the dryer use a soft cloth to wipe off any dust.
- If very dirty use a damp cloth and wipe dry. Do not use any cleaning detergents, sprays or other chemicals, as they will damage the unit.
- Store the unit in a ventilated dry area when not in use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>