headphonehonesty 5.0 Bluetooth Headphones Flashing Red And Blue User Manual

: June 5, 2024
: headphonehonesty

Table of Contents

Wireless 5.0 More compatible
One-button control
Easy pairing connection
Charging schematic
Wear schematic
Product schematic diagram
Packing List
Product specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

headphonehonesty 5.0 Bluetooth Headphones Flashing Red And Blue

Wireless 5.0 More compatible

Compatible with Apple IOS and Android smartphones

One-button control

Easy pairing connection

① The earphone is taken out of the package and placed in thecharging compartment. The earphone is charged and activated, blue light on.
② The earphone is taken out from the charging compartment, the LR earphone flashes blue, the R side flashes and the L side light is off, that means the pairing is successful.

③ Open the phone wireless Search wireless name: F2 Click Connect

Note: If the left and right earphones are not connected within 5 minutes, the earphones will automatically shut down, if you need to use them, please restart them

④ After the headset is used, put it directly into the charging box and the headset turns off.
⑤ To use the headset again, simply remove the headset from the charging box.
The headset will automatically complete the binaural pairing and connect the phone.

Charging schematic

When charging: White light flashing
Full power: white light is always on
Charging time: about 1 hour
Charge the earphone in the charging compartment. The blue light is on.
The earphone is fully charged and the light goes out.
The charging compartment is low and the blue light flashesout.

Note: When charging the product charging box, please use our standard charging cable, 5V/ 1 A charger.
Special Note: Do not use more than 5V/ 1A fast charge charger, so as not to damage the charging box!